Pd-doped Bi2MoO6 plasmonic photocatalysts with enhanced visible light photocatalytic performance

Xiangchao Meng,Zisheng Zhang

DOI: https://doi.org/10.1016/j.apsusc.2016.08.113

IF: 6.7

2017-01-01

Applied Surface Science

Abstract:•Pd-Bi2MoO6 plamonic photocatalysts were first prepared.•Enhanced visible light-driven photocatalytic performance was observed.•Phenol were completely degraded with Pd-Bi2MoO6 under visible light irradiation.

What problem does this paper attempt to address?

Synthesis of Cs3PMo12O40/Bi2O3 Composite with Highly Enhanced Photocatalytic Activity under Visible-Light Irradiation.

Qi Wang,Enqin Liu,Chenlu Zhang,Siwei Huang,Yanqing Cong,Yi Zhang

DOI: https://doi.org/10.1016/j.jcis.2018.01.065

IF: 9.9

2018-01-01

Journal of Colloid and Interface Science

Abstract:A novel visible-light-active Cs3PMo12O40/Bi2O3 (CsPMo/Bi2O3) composite was prepared by a simple dissolution-precipitation method. The as-prepared samples were characterized by XRD, XPS, FT-IR, SEM, UV-Vis DRS, N-2 adsorption-desorption isotherms and electrochemical analysis. The results revealed that Bi2O3 was successfully modified by trace CsPMo. After the addition of H3PMo12O40 acid (HPMo), the surface of Bi2O3 can be roughed. Subsequently, the presence of Cs2CO3 can neutralize the protons of HPMo forming CsPMo precipitate on Bi2O3. Comparing to naked Bi2O3 and CsPMo, the binary composite exhibited many beneficial characteristics in charge generation and separation, such as formation of p-n heterojunction, decreased band gap, enhanced photocurrent response and greatly reduced charge transfer resistance. The photocatalytic activities of the as-prepared samples were evaluated by the degradation of phenol under visible light. The calculated pseudo-first-order rate constants for phenol degradation were 2.7 and 14.8 times relative to that on Bi2O3 and CsPMo, respectively. Dramatically enhanced photocatalytic performance can be observed when the optimal CsPMo/Bi2O3 composite (2.5% CsPMo) was applied. The major active species involved in the degradation process are in the following order: superoxide radical (O-2(center dot-)) > hydroxyl radical ((OH)-O-center dot) approximate to hole (h(+)). Besides, the CsPMo/Bi2O3 composite also displayed good stability in cyclic experiments. (C) 2018 Elsevier Inc. All rights reserved.
Rod-like Bi4O7 Decorated Bi2O2CO3 Plates: Facile Synthesis, Promoted Charge Separation, and Highly Efficient Photocatalytic Degradation of Organic Contaminants

Meng Sun,Tao Yan,Yaru Zhang,Yunhui He,Yu Shao,Qin Wei,Bin Du

DOI: https://doi.org/10.1016/j.jcis.2017.12.042

IF: 9.9

2018-01-01

Journal of Colloid and Interface Science

Abstract:In this manuscript, rod-like Bi4O7 decorated Bi2O2CO3 plates were fabricated for the first time. Compared with pristine Bi2O2CO3, the tight decoration of Bi4O7 over Bi2O2CO3 plates not only strengthened the visible light absorption, but also enhanced the separation efficiency of photo-generated carriers. As expected, the heterostructured Bi4O2/Bi2O2CO3 composites have exhibited highly promoted photocatalytic activities in decomposing Rhodamine B (RhB) under visible light. The BOBC-2 sample displayed the best activity with a reaction rate constant of 0.0245 min(-1), which was 3.8 times higher than that of pure Bi4O7. Besides RhB, the Bi4O2/Bi2O2CO3 composites also displayed superior activity toward colorless contaminants with stable chemical structures, such as phenol, p-tert-butylphenol, and ophenylphenol. The activity enhancement should be ascribed to the proper energy levels of the materials and formation of heterojunction at their interfaces, which could facilitate the charge transfer and promote the separation efficiency. Following transient photocurrent response, electrochemical impedance spectroscopy, and photoluminescence emission tests all verified this. In addition, controlled experiments using various radical scavengers proved that center dot O-2(-) and h(+) played the chief role in decomposing organic pollutants. This work may provide a new method for constructing Bi-based heterostructured photocatalysts with high activity. (C) 2017 Elsevier Inc. All rights reserved.
Hierarchical core-shell SiO 2 @PDA@BiOBr microspheres with enhanced visible-light-driven photocatalytic performance.

Shuai-Ru Zhu,Qi Qi,Wen-Na Zhao,Meng-Ke Wu,Yuan Fang,Kai Tao,Fei-Yan Yi,Lei Han

DOI: https://doi.org/10.1039/c7dt01581j

IF: 4

2017-01-01

Dalton Transactions

Abstract:To explore catalysts combining highly accessible specific surface areas with low recombination of the photo-induced electron-hole pairs, a novel SiO2@PDA@BiOBr composite photocatalyst with a hierarchical core-shell structure was prepared by a facile solvothermal method. The catalyst shows a superior performance on photodegradation of Rhodamine B under visible light irradiation, especially for SiO2@PDA-2@BiOBr with the reactant kinetics constant (k = 0.0487 min(-1)). The enhanced photocatalytic performance of SiO2@PDA-2@BiOBr was ascribed to the decreased band-gap, higher surface area, and effectively photo-generated electron-hole pairs by the introduction of polydopamine (PDA). In addition, the photocatalytic degradation is initiated by O-center dot(2)- derived from dye photosensitization and h(+) from the BiOBr. Cyclic experiments also indicate that the SiO2@PDA-2@BiOBr is reusable during the photodegradation process. The hierarchical core-shell SiO2@PDA@BiOBr photocatalyst will provide a theoretical model for the development of physical chemistry and structural properties of BiOBr-based composites to enhance the photocatalytic performances.
Enhancement of visible photocatalytic performances of a Bi2MoO6-BiOCl nanocomposite with plate-on-plate heterojunction structure.

Du Yue,Daimei Chen,Zhihong Wang,Hao Ding,Ruilong Zong,Yongfa Zhu

DOI: https://doi.org/10.1039/c4cp03865g

IF: 3.3

2014-01-01

Physical Chemistry Chemical Physics

Abstract:A visible-light-sensitive Bi2MoO6-BiOCl heterojunction photocatalyst was synthesized via a hydrothermal process. The as-prepared Bi2MoO6-BiOCl composite shows an irregular multi-plate structure with length ranging from 100 nm to 1 mm, indicating a possibility of the plate-on-plate structure by placing Bi2MoO6 and BiOCl nanoplates over each other. The Bi2MoO6-BiOCl photocatalyst not only had a good visible-light photocatalytic performance, but also exhibited higher photocatalytic activity than pure BiOCl and Bi2MoO6. The optimal Bi2MoO6 content for the photocatalytic activity of the Bi2MoO6-BiOCl composites is 30%. Compared to pure Bi2MoO6 the photoactivity of the Bi2MoO6-BiOCl composites is almost 2.0 times higher for the RhB photodegradation, and 1.5 times higher for the phenol photodegradation under visible light irradiation. The photocatalytic mechanism was elucidated via active species trapping experiments and ESR. The (OH)-O-center dot and O-center dot(2)- played the key roles in the degradation of RhB via the Bi2MoO6-BiOCl composite. Finally, the possible charge transfer mechanism of the enhanced visible light photocatalytic activity was proposed.
Simultaneous Pd2+ doping and Pd metal deposition on (BiO) 2 CO 3 microspheres for enhanced and stable visible light photocatalysis

fan dong,peidong li,junbo zhong,xiaoying liu,yuxin zhang,w cen,hongwei huang

DOI: https://doi.org/10.1016/j.apcata.2015.11.022

2016-01-01

Abstract:•The Pd/Pd2+ co-modified (BiO)2CO3 microspheres were fabricated hydrothermally.•Pd/Pd2+ co-modified (BiO)2CO3 exhibited highly enhanced visible photocatalysis.•The doped Pd2+ could elevate the valence band and narrow band gap.•The Pd metal deposition could improve the charge separation and transfer.•The increased visible absorption and enhanced charge separation were achieved.
Enhancement of Visible Light Photocatalytic Performances of Bi2MoS2O4 Nanoplates

Rui Shi,Tongguang Xu,Lihong Yan,Yongfa Zhu,Jun Zhou

DOI: https://doi.org/10.1039/c3cy20853b

IF: 6.177

2013-01-01

Catalysis Science & Technology

Abstract:A novel Bi2MoS2O4 nanoplate photocatalyst with high-energy efficiency and high-activity has been successfully synthesized by a reflux method. The visible-light response of Bi2MoS2O4 could extend from 480 to 630 nm compared with Bi2MoO6. Compared with Bi2MoO6, the photocatalytic activities of the Bi2MoS2O4 sample increased about 0.4 and 4.6 times for degradation of methylene blue (MB) under UV and visible-light (lambda > 510 nm) irradiation, respectively. Density functional calculations revealed that Bi2MoS2O4 had a narrower band gap and wider valence bandwidth compared with Bi2MoO6 because S 3p orbitals contributed to the valence band formation. The high energy efficiency of Bi2MoS2O4 photocatalysts came from a narrow bandgap and the high activity came from a wider and dislocated valence band of Bi2MoS2O4. Furthermore, the synthesis of Bi2MoS2O4 could afford guidance for designing the other high-energy efficient and highly active photocatalysts.
Facile Formation of Bi2O2CO3/Bi2MoO6 Nanosheets for Visible Light-Driven Photocatalysis

Junlei Zhang,Zhendong Liu,Zhen Ma

DOI: https://doi.org/10.1021/acsomega.8b03699

IF: 4.1

2019-01-01

ACS Omega

Abstract:Bi2O2CO3/Bi2MoO6 heterojunction catalysts were prepared by treating Bi2MoO6 sheets with aqueous NaHCO3 solutions at room temperature. All the Bi2O2CO3/Bi2MoO6 heterojunctions exhibited higher activities than pristine Bi2MoO6 in the photocatalytic degradation of rhodamine B (RhB), methyl orange, and ciprofloxacin under visible-light irradiation, and the most active photocatalyst was found to be the one with a C/Bi molar ratio of ∼1/2.3. Relevant samples were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy, N2 adsorption-desorption, Fourier transform infrared spectroscopy, and UV-vis spectroscopy. The higher activity of Bi2O2CO3/Bi2MoO6 than pristine Bi2MoO6 is explained by the enhanced separation and transfer of photogenerated electron/hole pairs, as verified by transient photocurrent densities, photoluminescence spectroscopy, and electrochemical impedance spectroscopy. Photogenerated holes (h+) and superoxide radical anions (•O2 -) were found to be the main active species. The good reusability of Bi2O2CO3/Bi2MoO6 was testified by cycling degradation of RhB and tetracycline hydrochloride.
Heterostructured Bismuth Molybdate Composite: Preparation and Improved Photocatalytic Activity under Visible-Light Irradiation

Jia Ren,Wenzhong Wang,Meng Shang,Songmei Sun,Erping Gao

DOI: https://doi.org/10.1021/am200393h

2011-06-28

Abstract:A heterostructured photocatalyst containing the same Bi, Mo, and O elements (Bi(3.64)Mo(0.36)O(6.55)/Bi(2)MoO(6)) was realized by a facile hydrothermal method. The heterostructured composite was characterized by powder X-ray diffraction, selected-area electron diffraction, scanning electron microscopy, and high-resolution electron microscopy. The Bi(3.64)Mo(0.36)O(6.55)/Bi(2)MoO(6) composite exhibited notable enhanced photocatalytic activity compared to Bi(2)MoO(6) or Bi(3.64)Mo(0.36)O(6.55) in the photocatalytic degradation of rhodamine B and phenol under visible-light irradiation. More interestingly, it is found that the heterostructured composite could mineralize organic substances into CO(2) efficiently. This study offered a clue for the design of an efficient photocatalyst in the application of environmental treatment.

materials science, multidisciplinary,nanoscience & nanotechnology
Hierarchical Bi2MoO6 microsphere photocatalysts modified with polypyrrole conjugated polymer for efficient decontamination of organic pollutants

Ruyi Xie,Jianing Fan,Kuanjun Fang,Weichao Chen,Yawei Song,Ying Pan,Yingzhan Li,Jianxun Liu

DOI: https://doi.org/10.1016/j.chemosphere.2021.131541

IF: 8.8

2022-01-01

Chemosphere

Abstract:To effectively degrade organic pollutants in wastewater, visible-light-driven Bi2MoO6/PPy hierarchical heterogeneous photocatalysts were prepared through a solvothermal method and the following in-situ chemical oxidation polymerization. Compared with pristine Bi2MoO6 photocatalyst, the composite photocatalysts exhibited dramatically improved photocatalytic activity and photostability towards the degradation of methylene blue dye and tetracycline antibiotic. Bi2MoO6/PPy-80 sample achieved the highest photocatalytic degradation rates for methylene blue dye (93.6%) and tetracycline antibiotic (88.3%) under visible light irradiation. These two organic pollutants could be completely degraded into nontoxic small molecules according to in-depth HPLC-MS analysis of degradation products. The transient photocurrent responses, electrochemical impedance spectra, and photoluminescence spectra demonstrated that the introduction of PPy nanoparticles on the surface of Bi2MoO6 nanosheets could effectively accelerate the separation of photo-generated electron-hole pairs. Furthermore, a possible synergetic photocatalytic mechanism was put forward based on the electron spin resonance and XPS valence-band spectra. This work indicated that construction of hierarchical composite photocatalysts combining polypyrrole conductive polymer and Bi2MoO6 semiconductor in nanoscale is an efficient approach to improve photocatalytic activity for environmental remediation.

environmental sciences
Bi Cocatalyst/Bi2MoO6 Microspheres Nanohybrid with SPR-Promoted Visible-Light Photocatalysis

Zaiwang Zhao,Wendong Zhang,Yanjuan Sun,Jiayan Yu,Yuxin Zhang,Hong Wang,Fan Dong,Zhongbiao Wu

DOI: https://doi.org/10.1021/acs.jpcc.6b01188

2016-01-01

Abstract:To develop efficient visible light driveri photo-catalysts for air purification, we constructed a novel serni-metal semiconductor Bi-Bi2MoO6 (Bi-Mo) hybrid via the in situ deposition of Bi nanoparticles on the surface of Bi2MoO6 microspheres. In this strategy, the Bi3+ ions were in situ reduced to metallic Bi particles by glucose during in hydrothermal process. The XRD, XPS, SEM, TEM, UV-vis, DRS, PL spectra, and:surface photovoltage were employed to explore the structural and optical properties. The synthesized Bi-Bi2MoO6 nanohybrid was applied in photocatalytic removal of NO in air. The results indicated that the amount of reductive glucose riot only exerted a pivotal effect on the morphological structure but also affected the photocatalytic capability of the Bi-Bi2MoO6 nanohybrid. The optimized Bi-Mo-50 hybrids exhibited exceptionally high visible-light photocatalytic perforinauce with a NO removal ratio up to 68.1%, far outperforming other decent photocatalysts; like BiOBr (21.3%), C-doped TiO2. (21.8%), N-doped TiO2 (36.5%), N-doped (BiO)(2)CO3 (43.5%), and g-C3N4 (32.7%): This drastically enhanced photocatalytic capability was ascribed to the cocontributioris of the enhanced light absorption and the improved separation efficiency of the charge carriers owing to the surface plasmon resonance (SPR) induced by Bi metal. The Bi metal performs as noble metal-like cocatalyst for promoting the photocatalysis efficiency. Based on the DMPO-ESR spin trapping; the active species generated from Bi/Bi2MoO6 under visible light were (OH)-O-center dot radicals. The Bi/Bi2MoO6 produced more (OH)-O-center dot radicals contributing to strengthen oxidation ability in comparison with that of the pristine Bi2MoO6. In addition, this advanced Bi/Bi2MoO6 nanohybrid also exhibited high photochemical stability under repeated irradiation. This work demonstrated the feasibility of utilizing economical Bi element as a cocatalyst to substitute the precious noble metals to advance the photocatalysis efficiency.
Self-assembled Perylene Diimide Based Supramolecular Heterojunction with Bi2WO6 for Efficient Visible-Light-driven Photocatalysis

Kai Zhang,Jun Wang,Wenjun Jiang,Wenqing Yao,Haipeng Yang,Yongfa Zhu

DOI: https://doi.org/10.1016/j.apcatb.2018.03.059

2018-01-01

Abstract:Bi2WO6 photocatalyst was hybridized with perylene diimide (PDI) via a facile water bath heating method, the composites photocatalytic oxidation of phenol and water decomposition to produce oxygen are simulated under visible light. It was found that the Bi2WO6/PDI composite shows the higher visible light degradation rate towards phenol than self-assembled PDI and Bi2WO6. What's more, it simultaneously exhibits an enhanced oxygen production rate, which is 2 times than that of the pure self-assembled PDI. In the photocatalytic process of Bi2WO6/PDI composites under visible light irradiation, the position of conduction band and valence band between Bi2WO6 and PDI are beneficial to realize photogenerated carriers separation. In this work, we synthesized Bi2WO6/PDI heterojunction which is the same as most of the reported n-n type heterojunction photocatalysts, the CB and the VB levels of one are higher than the corresponding levels of the another semiconductor. A new inorganic and organic composite n-n type heterojunction was form to explain the mechanism of photocatalytic activity enhancement. Self-assembled PDI and Bi2WO6 surface hybridization to promote the separation of photogenerated carriers, electrons in the LUMO orbit of PDI are injected into the conduction band of the Bi2WO6, produced a superoxide radical-based visible light degradation activity.
Piezoelectric polarization promoted spatial separation of photogenerated charges in Bi2MoO6 catalyst and investigation of its synergistic photopiezocatalytic activity

Shilong Ji,Hua Lei,Meixuan Wu,Qingshen He,Pengfei Sun,Xiaoping Dong

DOI: https://doi.org/10.1016/j.jtice.2022.104260

IF: 5.477

2022-04-01

Journal of the Taiwan Institute of Chemical Engineers

Abstract:Background Bismuth molybdate (Bi2MoO6) has been demonstrated as an effective visible-light-driven photocatalyst for purification of pollutants in environment. However, its photocatalytic performance is greatly limited for practical usage due to the drastic recombination of photo-generated charges. Methods Herein, we employed an ultrasound treatment to piezoelectrically polarize the synthesized ferroelectric Bi2MoO6 catalyst. Through studying the current response of catalyst under different stimulations, the effect of quenching active species, the production of radicals, and the intermediate products in the photopiezocatalytic process, a plausible photopiezocatalytic mechanism was proposed. Significant findings The built-in piezoelectric field acts as a driving force to propel photo-induced e− and h+ to migrate toward opposite surfaces of Bi2MoO6, therefore suppressing their recombination. The photopiezocatalytic activity of Bi2MoO6 for elimination of Rhodamine B (RhB) is 4.19 times and 2.04 times of its photocatalysis and piezocatalysis. Meanwhile, the photopiezocatalysis of Bi2MoO6 also has a high stability and durability, as well as excellent performance for decomposing other pollutants, including dyes and 2,4-dichlorophenol. This investigation indicates that Bi2MoO6 is a promising photopiezocatalyst for efficient elimination of organic pollutants in environment.

engineering, chemical
Fabrication of a heterostructured Ag/AgCl/Bi2MoO6 plasmonic photocatalyst with efficient visible light activity towards dyes

qing yan,meng sun,tao yan,mengmeng li,liangguo yan,dong wei,bin du

DOI: https://doi.org/10.1039/c4ra15821k

IF: 4.036

2015-01-01

RSC Advances

Abstract:A ternary Ag/AgCl/Bi2MoO6 plasmonic photocatalyst was successfully fabricated through a two-step synthesis method. The obtained samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and ultraviolet-visible diffuse reflectance spectroscopy (DRS). The DRS results showed that the visible light absorption of the Ag/AgCl/ Bi2MoO6 composite had been greatly enhanced owing to the surface plasmonic resonance (SPR) of Ag-0 particles. The SEM and TEM images showed that the obtained flower-like Bi2MoO6 microspheres were composed of nanoplates, on the surface of which Ag/AgCl particles were distributed. In the photocatalytic degradation of dyes, Ag/AgCl/Bi2MoO6 photocatalysts exhibited significantly enhanced activities compared with Bi2MoO6. It was also found that the components of Ag/AgCl/Bi2MoO6 have a great influence on the activity. Controlled experiments proved that the degradation of pollutants over Ag/AgCl/Bi2MoO6 was mainly ascribed to the strong oxidation ability of photo-generated holes. On the basis of band structure analysis and active species trapping experimental results, a photocatalytic mechanism is also proposed.
Construction and Enhanced Efficiency of Bi2MoO6/ZnO Compo-Sites for Visible-Light-Driven Photocatalytic Performance

Liyun Yan,Jiahui Tang,Qing-an Qiao,Honglan Cai,Yuqi Dong,Juan Jin,Yanbin Xu,Hongwei Gao

DOI: https://doi.org/10.3390/nano13010214

IF: 5.3

2023-01-01

Nanomaterials

Abstract:Bi2MoO6 was one of the important bismuth-based semiconductors with a narrow bandgap, and has been widely used in selective oxidation catalysts, supercapacitors, and energy-storage devices. A series of Bi2MoO6/ZnO composite photocatalysts with different mass ratios were synthesized by the hydrothermal method. The synthesized samples were characterized by XRD, PL, UV-Vis, SEM, TEM, XPS, and BET analysis techniques. Under visible light conditions, Methylene blue (MB) was used as the target degradation product to evaluate its photocatalytic performance. The results showed that the degradation rate constant of Bi2MoO6/ZnO (0.4-BZO) was about twice that of the traditional photocatalysis of ZnO. The Bi2MoO6/ZnO composite catalyst maintained stable performance after four consecutive runs. The high photocatalytic activity of Bi2MoO6/ZnO was attributed to the efficient electron transport of the heterojunction, which accelerates the separation of electron-hole pairs and reduces the probability of carrier recombination near the Bi2MoO6/ZnO heterojunction. Bi2MoO6/ZnO nanocomposites have potential applications in the field of photodegradation.
Nanosize alpha-Bi2O3 decorated Bi2MoO6 via an alkali etching process for enhanced photocatalytic performance

Zhiqiang Hao,Lingling Xu,Bo Wei,Linlin Fan,Yang Liu,Mingyi Zhang,Hong Gao

DOI: https://doi.org/10.1039/c4ra14184a

IF: 4.036

2015-01-01

RSC Advances

Abstract:Bi2MoO6/Bi2O3 heterojunction photocatalysts were synthesized through a facile alkali etching method and their photocatalytic activity was evaluated by photodegradation of Rhodamine B (RhB) under visible-light irradiation. The photocatalysts were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM)/transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and UV-visible diffuse reflectance spectroscopy. XRD, TEM and XPS results confirm that the Bi2MoO6/Bi2O3 heterojunctions were formed after the alkali etching process. The photocatalytic activity can be easily controlled by adjusting the etching time and the highest visible-light-responsive photocatalytic performance was observed on Bi2MoO6/Bi2O3 composite that was etched in 0.1 M NaOH for 45 min. Moreover, the mechanistic study suggested that the photoinduced holes played a major role for the RhB degradation and the photocurrent tests confirmed that the effective electron-hole separation on the interface of the p-n junction promotes the photocatalytic process.
Enhanced Photocatalytic Activity of Bismuth Molybdates with the Preferentially Exposed {010} Surface under Visible Light Irradiation

Yan Zheng,Fang Duan,Ju Wu,Liang Liu,Mingqing Chen,Yi Xie

DOI: https://doi.org/10.1016/j.molcata.2008.12.010

2009-01-01

Abstract:In this work, γ-Bi2MoO6 samples with different morphologies and surface structures were prepared via simple solution methods and their photocatalytic degradations of rhodamine-B (RhB) were investigated under visible light irradiation. In spite of their lower BET surface area, we found that the γ-Bi2MoO6 sheets with the preferentially exposed {0 1 0} surface exhibited the greatly enhanced photocatalytic activity. The mechanism study and structural analysis of stoichiometric γ-Bi2MoO6 indicated that the particular reactive surface with much more oxygen defects and in-plane vacancies, derived from the larger distortion of the MoO6 octahedra, play a more important role of the enhanced photocatalytic activity.
Mechanochemical homodisperse of Bi2MoO6 on Zn-Al LDH matrix to form Z-scheme heterojunction with promoted visible-light photocatalytic performance

Xiangyang Li,Tian Ma,Lixin Dong,Yu Na,Yumo Liu,Zhao Li,Renji Zheng,Shujuan Dai,Tonglin Zhao

DOI: https://doi.org/10.1016/j.apt.2022.103468

IF: 4.969

2022-03-01

Advanced Powder Technology

Abstract:In this work, a Z-scheme Bi2MoO6/Zn-Al LDH heterojunction photocatalyst with excellent visible light responsiveness was fabricated via a two-step mechanochemical ball-milling process, where amorphous Bi2MoO6 particles were homodispersed upon the surface of lamellar LDH matrix. BPA was selected as the targeted organic contaminant to quantitatively evaluate the photocatalytic capacity of Bi2MoO6/Zn-Al LDH, in which the optimal 30 wt%Bi2MoO6/LDH exhibited a degradation rate of 96% within 300 min, over 9.25 and 18.5 times higher than that of individual pristine Bi2MoO6 and LDH, respectively. The crystal structure, microtopography, interfacial physicochemical interaction, optical and electrochemical properties of as-fabricated hybrids were systematically evaluated, and the DFT theoretical calculation was used to confirm the electronic structural characteristics in the Bi2MoO6/LDH heterojunction. A possible photocatalysis reaction mechanism was interpreted through ESR where the major manner of •O2– proved the Z-scheme electron migration within matched band levels.

engineering, chemical
Fabrication and efficient visible light-induced photocatalytic activity of Bi 2 MoO 6 /BiPO 4 composite

xue lin,di liu,xiaoyu guo,nan sun,shuang zhao,limin chang,hongju zhai,qingwei wang

DOI: https://doi.org/10.1016/j.jpcs.2014.09.002

IF: 4.383

2015-01-01

Journal of Physics and Chemistry of Solids

Abstract:Novel Bi2MoO6/BiPO4 composites with heterojunction structure were fabricated by a one-step hydrothermal method. The photocatalytic properties of Bi2MoO6/BiPO4 composites were evaluated by photocatalytic degradation of rhodamine B (Rh B) under visible light irradiation (λ>420nm). The results showed that Bi2MoO6/BiPO4 photocatalysts showed much higher photocatalytic activity for the Rh B degradation than the pure BiPO4 and Bi2MoO6 under visible light. The best photocatalytic performance of Bi2MoO6/BiPO4 with about 98.0% Rh B degradation located at molar ratio of 2:1 under visible light illumination for 30min. The enhanced photocatalytic activity could be mainly ascribed to the formation of heterojunction interface in Bi2MoO6/BiPO4 composites, which is beneficial to the transfer and separation of photogenerated electron–hole pairs, as well as the strong visible light absorption resulting from the sensitization role of Bi2MoO6 to BiPO4. It was also observed that the photodegradation of Rh B is chiefly attributed to the oxidation action of the generated O2− radicals and the action of hvb+ through direct hole oxidation process.
Enhanced Photocatalytic Properties of Bi2moo6/Zno under Different Preparation Conditions

Liyun Yan,Qing-an Qiao,Honglan Cai,Yuqi Dong,Juan Jin,Zhongxin Xue,Yanbin Xu,hongwei gao

DOI: https://doi.org/10.2139/ssrn.4213253

2022-01-01

SSRN Electronic Journal

Abstract:A series of Bi 2 MoO 6 /ZnO composite photocatalysts with different mass ratios were synthesized by hydrothermal method. The synthesized samples were characterized by XRD, PL, UV-Vis, SEM, TEM, XPS and BET analysis techniques. Under visible light conditions, Methylene blue (MB) was used as the target degradation product to evaluate its photocatalytic performance. The results showed that the degradation rate constant of Bi 2 MoO 6 /ZnO (0.4-BZO) was about twice that of the traditional photocatalysis of ZnO. The Bi 2 MoO 6 /ZnO composite catalyst maintained stable performance after four consecutive runs. The high photocatalytic activity of Bi 2 MoO 6 /ZnO was attributed to the efficient electron transport of the heterojunction, which accelerates the separation of electron-hole pairs and reduces the probability of carrier recombination near the Bi 2 MoO 6 /ZnO heterojunction. Bi 2 MoO 6 /ZnO nanocomposites have potential applications in the field of photodegradation.
Enhanced Visible-Light Photocatalytic Activity of Bi 2 MoO 6 Nanoplates with Heterogeneous Bi 2 MoO 6-x @Bi 2 MoO 6 Core-Shell Structure

Jianhui Guo,Lei Shi,Jiyin Zhao,Yang Wang,Kaibin Tang,Wanqun Zhang,Changzheng Xie,Xueyou Yuan

DOI: https://doi.org/10.1016/j.apcatb.2017.11.030

2018-01-01

Abstract:•A heterogeneous Bi2MoO6-x@Bi2MoO6 core-shell structure is obtained.•Visible-light absorption is enhanced through introduction of oxygen vacancies.•Recombination of the photogenerated charge carriers is suppressed.•The photocatalytic activity is significantly improved.

Pd-doped Bi2MoO6 plasmonic photocatalysts with enhanced visible light photocatalytic performance

Synthesis of Cs3PMo12O40/Bi2O3 Composite with Highly Enhanced Photocatalytic Activity under Visible-Light Irradiation.

Rod-like Bi4O7 Decorated Bi2O2CO3 Plates: Facile Synthesis, Promoted Charge Separation, and Highly Efficient Photocatalytic Degradation of Organic Contaminants

Hierarchical core-shell SiO 2 @PDA@BiOBr microspheres with enhanced visible-light-driven photocatalytic performance.

Enhancement of visible photocatalytic performances of a Bi2MoO6-BiOCl nanocomposite with plate-on-plate heterojunction structure.

Simultaneous Pd2+ doping and Pd metal deposition on (BiO) 2 CO 3 microspheres for enhanced and stable visible light photocatalysis

Enhancement of Visible Light Photocatalytic Performances of Bi2MoS2O4 Nanoplates

Facile Formation of Bi2O2CO3/Bi2MoO6 Nanosheets for Visible Light-Driven Photocatalysis

Heterostructured Bismuth Molybdate Composite: Preparation and Improved Photocatalytic Activity under Visible-Light Irradiation

Hierarchical Bi2MoO6 microsphere photocatalysts modified with polypyrrole conjugated polymer for efficient decontamination of organic pollutants

Bi Cocatalyst/Bi2MoO6 Microspheres Nanohybrid with SPR-Promoted Visible-Light Photocatalysis

Self-assembled Perylene Diimide Based Supramolecular Heterojunction with Bi2WO6 for Efficient Visible-Light-driven Photocatalysis

Piezoelectric polarization promoted spatial separation of photogenerated charges in Bi2MoO6 catalyst and investigation of its synergistic photopiezocatalytic activity

Fabrication of a heterostructured Ag/AgCl/Bi2MoO6 plasmonic photocatalyst with efficient visible light activity towards dyes

Construction and Enhanced Efficiency of Bi2MoO6/ZnO Compo-Sites for Visible-Light-Driven Photocatalytic Performance

Nanosize alpha-Bi2O3 decorated Bi2MoO6 via an alkali etching process for enhanced photocatalytic performance

Enhanced Photocatalytic Activity of Bismuth Molybdates with the Preferentially Exposed {010} Surface under Visible Light Irradiation

Mechanochemical homodisperse of Bi2MoO6 on Zn-Al LDH matrix to form Z-scheme heterojunction with promoted visible-light photocatalytic performance

Fabrication and efficient visible light-induced photocatalytic activity of Bi 2 MoO 6 /BiPO 4 composite

Enhanced Photocatalytic Properties of Bi2moo6/Zno under Different Preparation Conditions

Enhanced Visible-Light Photocatalytic Activity of Bi 2 MoO 6 Nanoplates with Heterogeneous Bi 2 MoO 6-x @Bi 2 MoO 6 Core-Shell Structure