Abstract:The development of a flexible wearable piezoelectric power device has recently caught extensive attention, especially in making inorganic piezoelectric ceramics into polymers from a composite with excellent piezoelectric response. As inorganic piezoelectric fillers, an oriented polycrystal can improve the mechanical energy efficiency of piezoelectric nanogenerators. Herein, the two-dimensional BaTiO3-oriented polycrystals are prepared via a two-step hydrothermal process based on a topochemical conversion mechanism. Additionally, a high-performance piezoelectric nanogenerator was successfully fabricated using the polydimethylsiloxane (PDMS) polymer and BaTiO3-oriented polycrystals. The flexible piezoelectric nanogenerator with 30 wt % BaTiO3 exhibited optimal piezoelectric performance, with an output open-circuit voltage of 13.0 V and a short-circuit current of 200 nA under a periodic mechanical bend–release mode. More importantly, an effective power of approximately 2.6 μW was achieved at a low load resistance of 35 MΩ, suggesting a large potential for applications of electronic skins and self-powered devices. The device efficiently harvests biomechanical energy from human activities and exhibits stable output voltage and current of approximately 8 V and 150 nA, respectfully, demonstrating great promise as a wearable energy harvester. This work demonstrates that oriented nanocrystals in combination with a polymer matrix can lead to the design of high-efficiency piezoelectric nanogenerators that are particularly useful in artificial intelligence, soft robotics, and biomedical devices.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.1c07875.XRD and FE-SEM of the KTLO and HTO crystals. Raman spectra of composite films. SEM-EDS mapping images of composite film. Piezoelectric coefficients (d33) of the composite films. P–E hysteresis loop for the BT ceramics and PDMS film. Output performance of the PENG devices with different BT weight fractions. Schematic diagram of the test circuit. Calculated results of the stress distribution. (PDF)This article has not yet been cited by other publications.

Flexible Lead-Free BiFeO3/PDMS-Based Nanogenerator as Piezoelectric Energy Harvester.

Piezoelectric Nanogenerator Based on a Flexible Carbon-Fiber/zno–znse Bilayer Structure Wire

A Self-Supported Structure Hybrid Triboelectric/piezoelectric Nanogenerator for Bio-Mechanical Energy Harvesting and Pressure Sensing

Flexible piezoelectric energy-harvesting nanogenerator using supersonically sprayed polyvinylidene fluoride and iron oxide nanocubes

Flexible Porous PDMS/PZT-based Nanogenerator Enabled by Dual Effect of Ferroelectricity and Piezoelectricity.

Flexible Composites with Rare-Earth Element Doped Polycrystalline Particles for Piezoelectric Nanogenerators

Piezoelectric Nanogenerator Based on Lead-Free Flexible PVDF-Barium Titanate Composite Films for Driving Low Power Electronics

KNN/PDMS/C-based lead-free piezoelectric composite film for flexible nanogenerator

Flexible and Stable Piezoelectric Nanogenerators Based on Monoclinic Phase CsPbBr3 Perovskite Nanocrystals

Flexible Piezoelectric Nanogenerators Based on P(VDF-TrFE)/CsPbBr 3 Quantum Dot Composite Films

A High Output Voltage Flexible Piezoelectric Nanogenerator Using Porous Lead-Free Knbo3 Nanofibers

Performance Enhancement of Flexible Piezoelectric Nanogenerator via Doping and Rational 3D Structure Design For Self‐Powered Mechanosensational System

Lead-free, High-Current Output Piezoelectric Nanogenerators Using Three-Dimensional Interdigitated Electrodes

Flexible textured MnO2 nanorods/ PVDF hybrid films with superior piezoelectric performance for energy harvesting application

Piezoelectric Nanogenerators Based On BaTiO3/PDMS Composites for High-Frequency Applications

Three-dimensional polymer-nanoparticle-liquid ternary composite for ultrahigh augmentation of piezoelectric nanogenerators

Flexible piezoelectric nanogenerator based on the Er3 + doped lead-free (Na0.5Bi0.5)TiO3-BaTiO3 piezoelectric nanofibers with strong upconversion luminescence

Mechanical Energy Harvesting and Specific Potential Distribution of a Flexible Piezoelectric Nanogenerator Based on 2-D BaTiO 3 -Oriented Polycrystals

Flexible Hybridized Nanogenerators Based on a Reduced Graphene Oxide Nanosheet-Decorated Piezoceramic Skeleton to Impact Mechanical and Thermal Energy Harvesting

[ASAP] High-Performance Piezoelectric Nanogenerator Based on Low-Entropy Structured Nanofibers for a Multi-Mode Energy Harvesting and Self-Powered Ultraviolet Photodetector

Controllable Core-Shell BaTiO<sub>3</sub>@Carbon Nanoparticle-Enabled P(VDF-TrFE) Composites: A Cost-Effective Approach to High-Performance Piezoelectric Nanogenerators