Abstract:The use of carbon fiber reinforced plastic (CFRP) is rapidly increasing in aerospace and automobile applications. This is in large part due to the increase strength and modulus of carbon fiber composites compared to other materials such as glass fiber composites. The fiber-matrix interface has been found to be important for high strength in composites. Methods that have been studied and developed to improve interfacial property of composites include: the addition of coupling agents, surface modifications, chemical reaction control and use of nano-fillers for reinforcement. During mechanical loading the shape of carbon fibers, in a composite, is altered with a concomitant change in electrical resistance. Carbon fibers are used as sensing elements in CFRP due to their electrical conductivity. In some more advanced studies, in CRFP, the carbon fibers were used for both strain sensing and damage sensing. The basic theory, in such studies, was that the movement of carbon fiber could be detected by electrical resistance measurement. During loading, the extent of contact between carbon fibers in a CF tow is altered, and the electrical resistance changes from its initial value. In this work, interfacial properties of carbon fiber/polymer composites were evaluated by such electrical resistance measurements. During the wetting process of CF tows by the polymer resins, the change in electrical resistance was recorded and analyzed. The test results for different carbon fibers and polymer resins exhibited different trends. The electrical resistance change was associated with the different wetting conditions, and the interfacial properties were predicted by these electrical resistance measurements. CF tow/epoxy exhibited the poorest carbon tow wettability, the smallest change in resistance and the poorest IFSS and ILSS. For the four systems studied, the relative change in each of these quantities for the materials of a given composite was roughly proportional to the other measured quantities. This may have some very significant practical importance. It may point the way to use quick easy tests to screen and predict other behaviors for composites of different materials and/or processes. Perhaps a simple resistance change test might be used to predict and select good candidate materials, surface processing techniques for high strength composite applications. The proportional relationship between interfacial adhesion and electrical resistance change was obtained by trend fitting line analyses. Ultimately, it was demonstrated that mechanical properties related to interfacial properties might potentially be predicted by electrical resistance measurement and studies of wetting behavior, using empirical formulas and correlations.

AFM Characterization of Interphase Properties of Silver-Coated Carbon Fibre Reinforced Epoxy Composites

Interfacial Evaluation Of Carbon Frinforced Nano-Composites Using Electrical Resistance Measurement With Wetting Tests

Enhanced Interfacial Properties of High-Modulus Carbon Fiber Composites Via Molecular Assembly on Fiber Surface

New Method for Interfacial Evaluation of Carbon Fiber/Thermosetting Composites by Wetting and Electrical Resistance Measurements

Adhesion Force Measured by Atomic Force Microscopy for Direct Carbon Fiber-Epoxy Interfacial Characterization

Controlled Interphase in Carbon Fiber/Epoxy Composites by Molecular Self-Assembly Method

Interfacially Reinforced Carbon Fiber Silicone Resin Via Constructing Functional Nano-Structural Silver

Controlled Interface Between Carbon Fiber and Epoxy by Molecular Self-Assembly Method

Study on Atomic Oxygen Erosion Resistance for the Interface of Carbon Fiber/Epoxy Composites

Influence of Carbon Nanotube Coatings on Carbon Fiber by Ultrasonically Assisted Electrophoretic Deposition on Its Composite Interfacial Property.

Effects of Chain Lengths, Molecular Orientation, and Functional Groups of Thiols Adsorbed Onto CF Surface on Interfacial Properties of CF/epoxy Composites

Silver Nanoparticles/graphene Oxide Decorated Carbon Fiber Synergistic Reinforcement in Epoxy-Based Composites

Improved Mechanical Properties of Graphene/Carbon Fibre Composites via Silanization

Effect of Particle Size and Distribution of the Sizing Agent on the Carbon Fibers Surface and Interfacial Shear Strength (IFSS) of Its Composites

Influence of Sizing Emulsifier Content on the Properties of Carbon Fibers and Its Composites

Preparation of highly active aramid fiber and effect on the interface property of aramid/epoxy composites

Quantitative Analysis Based on Atomic Force Microscopy Characterization of Interfacial Properties Between Carbon Fibers and Epoxy Resin Subjected to Hygrothermal and Thermal Treatments

The Effect of Carbon-Fiber Surface Properties on the Electron-Beam Curing of Epoxy-Resin Composites

Effects of oxidation‐induced aggregation structure transformation of aramid fiber on interfacial adhesion of epoxy resin

Investigation of the nanostructure and nanomechanical properties of the interphase in carbon fiber reinforced polyamide-6 composite

Effects of Coating Structures on Interfacial Properties of Carbon Fibre/Polyarylacetylene Composites