Opportunities and challenges in perovskite–organic thin-film tandem solar cells

Xin Meng,Zhengrong Jia,Xiuxiu Niu,Chunnian He,Yi Hou

DOI: https://doi.org/10.1039/d3nr06602a

IF: 6.7

2024-04-05

Nanoscale

Abstract:Efficiency is paramount in enhancing the performance and cost-effectiveness of solar cells. Recent advancements in single-junction perovskite solar cells (PSCs) have yielded an impressive efficiency of 26.1%, nearing their theoretical limit. Meanwhile, multi-junction tandem solar cells exhibit a remarkable efficiency potential exceeding 42%, surpassing the 33% limit of single-junction cells, thereby opening avenues for ultra-high-efficiency solar cells. Tandem solar cells (TSCs) represent a groundbreaking photovoltaic technology, offering high efficiency, low cost, and a simple fabrication process. Among various TSCs, perovskite–organic TSCs (PO TSCs) are particularly promising due to their ability to leverage the complementary strengths of PSCs and organic solar cells (OSCs). PO TSCs are poised to outperform existing TSCs in terms of device performance, manufacturing cost, and diverse applications. The introduction of Y6-series non-fullerene acceptors (NFAs) over the past three years has significantly advanced the development of OSCs, leading to remarkable progress in PO TSCs. This paper commences by elucidating the advantages and potential of OSCs as bottom sub-cells in PO TSCs, followed by an in-depth review of mainstream interconnection layer (ICL) design. It then addresses key challenges in wide bandgap PSCs, including phase segregation, photovoltage loss, energy loss, and long-term stability. The paper concludes by examining critical factors influencing the future development of PO TSCs.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry

What problem does this paper attempt to address?

This paper aims to address the key challenges in performance improvement of perovskite - organic tandem solar cells (PO TSCs). Specifically, the paper focuses on the following main issues:

1. **Efficiency improvement**: Although single - junction perovskite solar cells (PSCs) have reached a certified efficiency of 26.1%, approaching their theoretical limit (about 33%), the efficiency potential of multi - junction tandem solar cells (TSCs) exceeds 42%, far exceeding that of single - junction cells. The paper explores how to further improve the efficiency by optimizing the perovskite - organic tandem structure, especially by introducing the Y6 series of non - fullerene acceptors (NFAs) to significantly enhance the performance of organic solar cells (OSCs), thereby promoting the overall efficiency of PO TSCs.

2. **Problems of wide - bandgap perovskite solar cells**:
- **Phase separation**: Mixed - halide perovskites with high bromine content are prone to phase separation under illumination, resulting in the formation of iodine - rich and bromine - rich regions, which affects battery performance.
- **Open - circuit voltage (VOC) loss**: Theoretically, wide - bandgap perovskites should have a higher VOC, but when the bromine content exceeds 20%, a VOC saturation phenomenon occurs. The paper analyzes the reasons for this phenomenon, including factors such as thermodynamics, lattice strain, and electric fields caused by charge traps, and proposes possible solutions, such as reducing defects through additive engineering.

3. **Interconnect layer (ICL) design**: In order to achieve ideal current matching, each sub - cell in a tandem solar cell needs to absorb and convert the same number of photons. The paper discusses the design strategies of ICL, including using highly conductive recombination layers or highly doped n - type and p - type layers to form tunnel junctions to enhance recombination. At the same time, the ICL needs to have good optical transparency, especially in the near - infrared (NIR) range, to avoid parasitic absorption reducing the short - circuit current density (JSC) of the bottom sub - cell.

4. **Long - term stability**: Although individual organic solar cells are unstable under ultraviolet irradiation, the wide - bandgap perovskite sub - cells in PO TSCs can play a role in UV filtering, improving the long - term stability of the overall device. The paper also explores how to further improve the stability of PO TSCs through methods such as interface engineering and surface passivation.

5. **Future prospects**: Finally, the paper looks forward to the future development of PO TSCs, emphasizing the efficiency gap between laboratory - level devices and large - scale modules and the improvement of long - term operational stability. Future research directions include improving the efficiency and lifespan of perovskite and organic sub - cells, developing innovative ICL structures and materials, and exploring scalable PO TSCs manufacturing methods.

In summary, through a comprehensive analysis of the current progress and major challenges faced by PO TSCs, the paper proposes strategies and directions for further improving their performance.