Abstract:A mechanically flexible and fully integrated electrocardiogram (ECG) recording patch (ERP) that simultaneously monitors the ECG signals and detects the arrhythmia is presented. A simplified two-step process is applied to fabricate the acetylene carbon black (AB)/ polydimethylsiloxane (PDMS) electrodes. The soft and adhesive nature of polymer composite electrodes allows conformal contact to the skin. The ERP integrates ECG front end circuits, microcontroller chip and wireless communication unit on a flexible printed circuit boards (FPCB) with electrodes attached on its back, which bridges the technological gap among the signal acquisition, processing, and wireless transmission in the wearable electronics. The ERP can be deformed easily under stretching and bending actions by a special connection of two squares through serpentine traces. With the concentration of 7 wt% AB, the average signal-to-noise ratio (SNR) of the built electrodes at different postures (sit, stand and walk) during electrocardiography are assessed as 17.4 dB, 16.1 dB and 5.6 dB, respectively. Similarly, the SNR of the ERP with Ag/AgCl electrodes are 22.1 dB, 20.6 dB and 10.3 dB, respectively. The performance of the AB/PDMS electrodes are very close to the standard Ag/AgCl electrodes. In addition, the ERP have the ability of anti-interference from environmental noise and motion artifacts (MA). Benefited from implemented microcontroller unit (MCU) platform, the ERP allows sophisticated signal processing with the introduction of discrete wavelet transform (DWT) and support vector machine (SVM) algorithms, which achieves high classification accuracy of 98.7% for online arrhythmia detection. The designed platform provides a wide range of applications for other personalized physiological monitoring and diagnosis. (c) 2021 Published by Elsevier B.V.

[Measurement of Body Surface Laplacian ECG and Its Signal Processing].

Evaluation Of Non-Contact Flexible Electrodes Connected With A Customized Ic -Steps Towards A Fully Integrated Ecg Sensor

Surface Laplacian Approximation Theory of the Triple Concentric Electrode and Its Error Analysis

Design of a self-organized Intelligent Electrode for synchronous measurement of multiple bio-signals in a wearable healthcare monitoring system

A Hybrid Low Power Biopatch for Body Surface Potential Measurement

Scalp Surface Laplacian Potential Monitoring System Based on Novel Hydrogel Active Tri-Polar Concentric Ring Electrodes

Optimized Electrode Locations For Wearable Single-Lead Ecg Monitoring Devices: A Case Study Using Wfees Modules Based On The Lans Method

Physiology and Geometry-Informed Deep Learning Framework for 12-Lead ECG Cardiac Transmembrane Potential Recovery

The Feasibility Study of the Laplacian Electrode for EEG

Chest-scale self-compensated epidermal electronics for standard 6-precordial-lead ECG

A Guideline for Parameter Design of Body Surface Laplacian Electrodes and Its Application in EGG Detection.

Electronics of a Wearable ECG With Level Crossing Sampling and Human Body Communication

Capacitively Coupled Electrocardiogram Measuring System and Noise Reduction by Singular Spectrum Analysis

A Capacitive Electrocardiography System With Dedicated Noise-Cancellation Algorithms for Morphological Analysis

Parameter Optimization of Body Surface Laplacian Electrodes in Bioelectricity Detection

A Low-Power Portable ECG Sensor Interface with Dry Electrodes

Non-contact Electrocardiogram Measuring Method Based on Capacitance Coupling Electrodes with Ultra-High Input Impedance.

On the Reconstruction of Cardiac Transmembrane Potential Pattern from Body Surface Measurement

Fully Integrated Flexible Long-Term Electrocardiogram Recording Patch with Gel-Less Adhesive Electrodes for Arrhythmia Detection

Electromechanical Design of Self-Similar Inspired Surface Electrodes for Human-Machine Interaction.

A New Bodysurface Detection Method for Multibeat Sinoatrial Node Electrogram