Abstract:Shape memory alloy (SMA) actuators often operate under a complex state of stress for an extended number of thermomechanical cycles in many aerospace and engineering applications. Hence, it becomes important to account for multi-axial stress states and deformation characteristics (which evolve with thermomechanical cycling) when calibrating any SMA model for implementation in large-scale simulation of actuators. To this end, the present work is focused on the experimental validation of an SMA model calibrated for the transient and cyclic evolutionary behavior of shape memory Ni49.9Ti50.1, for the actuation of axially loaded helical-coil springs. The approach requires both experimental and computational aspects to appropriately assess the thermomechanical response of these multi-dimensional structures. As such, an instrumented and controlled experimental setup was assembled to obtain temperature, torque, degree of twist and extension, while controlling end constraints during heating and cooling of an SMA spring under a constant externally applied axial load. The computational component assesses the capabilities of a general, multi-axial, SMA material-modeling framework, calibrated for Ni49.9Ti50.1 with regard to its usefulness in the simulation of SMA helical-coil spring actuators. Axial extension, being the primary response, was examined on an axially-loaded spring with multiple active coils. Two different conditions of end boundary constraint were investigated in both the numerical simulations as well as the validation experiments: Case (1) where the loading end is restrained against twist (and the resulting torque measured as the secondary response) and Case (2) where the loading end is free to twist (and the degree of twist measured as the secondary response). The present study focuses on the transient and evolutionary response associated with the initial isothermal loading and the subsequent thermal cycles under applied constant axial load. The experimental results for the helical-coil actuator under two different boundary conditions are found to be within error to their counterparts in the numerical simulations. The numerical simulation and the experimental validation demonstrate similar transient and evolutionary behavior in the deformation response under the complex, inhomogeneous, multi-axial stress-state and large deformations of the helical-coil actuator. This response, although substantially different in magnitude, exhibited similar evolutionary characteristics to the simple, uniaxial, homogeneous, stress-state of the isobaric tensile tests results used for the model calibration. There was no significant difference in the axial displacement (primary response) magnitudes observed between Cases (1) and (2) for the number of cycles investigated here. The simulated secondary responses of the two cases evolved in a similar manner when compared to the experimental validation of the respective cases.

Theoretical Analysis of Superelastic SMA Helical Structures Subjected to Axial and Torsional Loads

Two-Dimensional Analysis of Shape Memory Alloys under Small Loadings

Modelling and Experimental Study of Shape Memory Alloys Coil Spring Actuator

Modeling Microstructure Evolution in Shape Memory Alloy Rods Via Legendre Wavelets Collocation Method

Numerical Simulation and Experimental Study of a Simplified Force-Displacement Relationship in Superelastic SMA Helical Springs

Super-Elastic Behavior Analysis of Shape Memory Alloy Vascular Stent

Thermo-mechanically coupled deformation of pseudoelastic NiTi SMA helical spring

Micromechanical Modeling on Thermomechanical Coupling of Cyclically Deformed Superelastic NiTi Shape Memory Alloy

Modeling evolutions of plastic strain, maximum transformation strain and transformation temperatures in SMA under superelastic cycling

Three-dimensional deformation response of a NiTi shape memory helical-coil actuator during thermomechanical cycling: experimentally validated numerical model

Experimental Study of Superelasticity of Ni-Ti Shape Memory Alloy Wires

Tensile Test of Shape Memory Alloys and Numerical Simulation

Research on Superelasticity of Shape Memory Alloys Based on Reproducing Kernel Particle Method

Tests on Pretrained Superelastic NiTi Shape Memory Alloy Rods: Towards Application in Self-Centering Link Beams

A Three-dimensional Constitutive Model for Polycrystalline Shape Memory Alloys Under Large Strains Combined With Large Rotations

Modeling and Experimental Validation of the Hysteretic Dynamics of Shape Memory Alloy Springs

Feasibility study of shape memory alloy ring spring systems for self-centring seismic resisting devices

Numerical Study on Mechanical Response of Superelastic NiTi Shape Memory Alloy under Various Loading Conditions

Strain Rate Dependent Formulation of the Latent Heat Evolution of Superelastic Shape Memory Alloy Wires Incorporated in Multistory Frame Structures

Experiment and simulation study on the functional fatigue of shape memory alloy beam actuators

Functional fatigue of superelasticity and elastocaloric effect for NiTi springs