Control Effect of THMs during Chloramine Disinfection of Effluent from MBR

XI Lu-yi,YANG Yan-ling,LI Xing,HUANG Jing,AN Dong-zi

DOI: https://doi.org/10.19853/j.zgjsps.1000-4602.2011.15.010

2011-01-01

Abstract:Chloramine was used to disinfect the effluent from MBR,and the factors influencing the production of THMs were controlled to optimize the disinfection effect.The results show that with the reduction of ratio of chlorine to ammonia,the production of THMs decreases.When the ratios of chlorine to ammonia are 5 ∶ 1,4 ∶ 1,3 ∶ 1 and 2 ∶ 1,the production of THMs decreases by 63.9%,72.5%,74.3% and 75.2% respectively compared with chlorine disinfection.The way of successive adding chlorine and ammonium chloride has better effect than the way of simultaneous adding on controlling the production of THMs.The way of adding chloride before and after ammonium chloride decreases the production of THMs by 8.8% and 34.4% respectively compared with simultaneous adding.There is a good liner relationship between the production of THMs and dosage of chloramines(R2=0.947 8).The production of THMs increases with contact time,but it remains stable after 10 h.Increasing the pH value is not beneficial to the production of THMs,and the production of THMs remains stable when the pH is equal to or more than 8.The production of THMs increases as the temperature rises,but has little change.