Abstract:This paper investigated the maximum power point tracking (MPPT) strategy for wind energy conversion system (WECS), where a direct-driven permanent magnet synchronous generator (PMSG) was involved. To achieve above target, a variable step Hill Climbing Searching Method was proposed, which improved the static tracking error and dynamic response of maximum wind power. In addition, to simply the torque control of PMSG drive, Filed oriented control was adopted, and the optimal torque reference can be directly inferred by MPPT algorithm. Improvements of this algorithm included attenuating step length of q-axis current to reduce power oscillation and initializing this step length to track the new maximum power when a sudden change of wind speed emerged. During this process, the maximum power point was identified by comparing slopes of wind power curve at current and previous time instants, whereas the change of wind speed was detected by comparing variation of wind power with a threshold value set dynamically and periodically. Because of using no wind speed sensors, the proposed method is easy to implement. Simulations of WECS were performed by the Matlab/Simulink software, and hardware was tested as well. Both of the results confirmed the effectiveness of the proposed MPPT algorithm, and it also demonstrated a good potential to be applied in engineering

Optimal Wind Energy Tracking Control of Directly-Driven Six-Phase PMSG

Modeling and control of the wind turbine with the Direct Drive Permanent Magnet Generator integrated to power grid

Power Fluctuations Smoothing Control Based on PCH Model of D-PMSG Wind Power System

An Integrated Control Strategy for D-PMSG Wind Power Generation Systems

Research on Maximum Power Tracking Control Method of Permanent Magnet Synchronous Wind Power Generation in Microgrid

A novel control strategy of wind turbine MPPT implementation for direct-drive PMSG wind generation imitation platform

Sensorless control of permanent magnet synchronous generator in direct-drive wind power system

Dual Stator Windings PMSG Fed by Half-Controlled Converters for Wind Power Application

Improved load-adaptive control strategy for PMSG based stand-alone wind energy generation system

A novel control strategy of direct-drive pmsg wind generation mppt based on experimental imitation platform

Research on the unit power factor control of directly-driven PM wind generator

Research on Direct-drive Wind Generation Power Converter Control Without PMSG Parameters

Sensorless Control of Pmsg Based on Dual Two-Level Inverter Open Winding Configuration for Wind Turbines

A Novel Sensorless Unity Power Factor Control Method for Six-phase PMSG in Direct Drive Wind Energy Conversion Systems

Based on PCHD and HPSO Sliding Mode Control of D-PMSG Wind Power System

A Fuzzy Logical MPPT Control Strategy for PMSG Wind Generation Systems

An MPPT Control of a PMSG-Based WECS with Disturbance Compensation and Wind Speed Estimation

Promoted Variable Step Maximum Power Point Tracking Algorithm Used in the Wind Energy Conversion System

An Improved Grid-connected Control Strategy of Double PWM Direct-drive Permanent-magnet Synchronous Wind Generators

Maximum Power Point Tracking Strategy for a New Wind Power System and Its Design Details

Analyze of current control strategy based on vector control for permanent-magnet synchronous generator in wind power system