Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. This study proposes a design method of internal meshing gear with elliptical contact path, and its contact characteristics are analyzed. The tooth profile of the internal meshing gear is actively designed based on elliptical meshing line (EML). Firstly, the elliptic meshing line is established according to the principle of differential geometry. The intersection points of the index circle and the tooth top circle of the internal meshing gear are on the meshing line. And the length of the minor axis of the elliptical meshing line can be set arbitrarily. Secondly, based on the rack equation and plane coordinate transformation, the tooth top profile equation of the EML gear was derived. Finally, the root tooth profile equations are derived from the top tooth profile equations based on the gear meshing principle. The theoretical model of EML gear is verified by finite element method. The contact stress, meshing stiffness and transmission error of minor axis of elliptic meshing line under different lengths are analyzed. The results show that by adjusting the length of the minor axis appropriately, the contact stress, mesh stiffness and transmission error of the EML gear will be reduced accordingly. Compared with involute gears, the contact stress of EML gears is reduced by 58.76%, the mesh stiffness is increased by 68.38%, and the transmission error is reduced by 40.62%. The contact performance of internal gears is greatly improved. By modifying the minor axis length of the elliptic meshing line of EML gear, the tooth profile of EML gear can be automatically modified through the equation relationship between the minor axis length and the tooth profile, so that the tooth profile design is more efficient. This study provides a reference for improving the performance of internal meshing gears.

Research on Design Region of Geometrical Sizes of Internal Parallel Move Gears

The Design of Drive Mechanism for Precision Press Based on Non-circular Gears

GUDA-12 CONCEPTUAL DEVELOPMENT IN DESIGN MOVABLE TOOTH GEAR DRIVES(GEAR UNIT DESIGN AND APPLICATIONS)

Research on the Rotary-Linear Motion Magnetic Gear Based on Ansys

Design of the conjugated straight-line internal gear pairs for fluid power gear machines

Study on mapping design method of non-circular gear

Interference of Internal Involute Bevoloid Gears with Parallel Axes

Computational Design and Optimization of Non‐Circular Gears

Geometric design and analysis of face-gear drive with involute helical pinion

Geometric design and contact analysis of internal meshing gears with elliptical contact path

Computerized determination of the qualified region of main design parameters of face-milled hypoid gears with low shaft angle

Program Design for the 3K Planetary Gear Mechanism with More Than Three Planet Gears

The Parametric Design of the External Transmission of Involute Beveloid Gear with Parallel Axes

Research on Initial Gap of Cycloid Pin Gear Modification and Optimal Way of Modification

Design of transmission accuracy of the involute cylindrical gear-worm gear system under large temperature difference based on FE method

Mathematical design and meshing analysis of a new internal gear transmission based on spatial involute-helix curve

Geometric parameter design and contact characteristics of beveloid gear and involute cylindrical gear transmission with crossed axes

Optimization Design of Three-Stage Cylindrical Gear Reducer

Computerized design and analysis of a novel high load bearing internal gear drive with curved meshing line

Research on High-Precision Measurement Method for Small-Size Gears with Small-Modulus

An Analysis of Load-Bearing Capacity of Gearing with Small Teeth Number Difference and its Volume Optimization