Abstract:a novel method to increase the efﬁciency of separating inclusions by using a multistage multichannel separator i.e. dividing a single channel to sub-channels in the ﬂow direction. A numerical method has been developed to simulate the ﬂow ﬁeld in a single-square and a two-stage multi-square separator, and the particle concentration and separation efﬁciency of dross particles from zinc melt ﬂowing through both separator arrangements. The main reason for improvement in separation efﬁciency by the multi-square separator is discussed and comparison with the corresponding experiments is also presented. A two-stage multichannel was designed to increase the efﬁciency of separating non-metallic particles from liquid metal ﬂowing through an alternating magnetic ﬁeld. Numerical method was developed to calculate the particle concentration and separation efﬁciency of a zinc melt containing dross particles and veriﬁed by the experimental results. The distribution of particle concentration and axial ﬂuid velocity changed signiﬁcantly due to the added walls in the sub-channel, resulting in an abrupt increase in the residence time of the inner bulk melt with high particle concentrations and a remarkable increase in particle separation efﬁciency when ﬂowing through the single-channel to sub-channels. A multistage and multichannel arrangement is hence recommended for further increase in the separation efﬁciency of an electromagnetic separator.

Separation of Zinc Dross from Hot Dip Galvanizing Melt by Using Alternating Magnetic Field

Continuous Separation of Fe–Al–Zn Dross Phase from Hot Dip Galvanised Melt Using Alternating Magnetic Field

Separation Behaviour of Zinc Dross from Hot Dip Galvanising Melts of Different Aluminium Concentrations by Alternating Magnetic Field

Electromagnetic Separation of Zinc Dross in Hot Dip Galvanizing Melt Using

Identification of Fe–Al–Zn Dross Phase in Galvanised Zinc Bath and Its Separation by Method of Alternating Magnetic Field

Study of Flow and Zinc Dross Removal in Hot-Dip Galvanizing with Combined Traveling Magnetic Field

Effects of Zinc Bath Outside Circulating Purification on Fluid and Heat Transfer of Continuous Hot Dip Galvanizing Pot

Separation of inclusions from aluminum melt using alternating electromagnetic field

Continuous Separation of Non-Metallic Inclusions from Aluminum Melt Using Alternating Magnetic Field

Numerical Simulation of Zinc Dross Diffusion in a Continuous Hot Dip Galvanized Zinc Pot under the Industrial Production Condition

The Droplet Evolution Trend and Purification Efficiency in ESR Process by Superimposing a Static Magnetic Field

The fundamental research on suspended dross in hot dip Al–Zn galvanising process

Purification and Recovery of Hot-Dip Galvanizing Slag via Supergravity-Induced Cake-Mode Filtration

Modelling the Electromagnetic Separation of Non-metallic Particles from Liquid Metal Flowing Through a Two-stage Multichannel

Continuous Removal of Nonmetallic Inclusions from Aluminum Melts by Means of Stationary Electromagnetic Field and DC Current

Application of High Frequency Magnetic Field to Separate Inclusion Particles in Aluminum Melt

Theoretical and Experimental Investigation of Aluminum Melt Cleaning Using Alternating Electromagnetic Field

Study of Electromagnetic Separation of Nometallic Inclusions from Aluminum Melt

Effect of supergravity field on the behavior of suspended dross in hot dip Al-Zn and purification

Separation of Inclusion Particles in Hollow-Cylinder Like Melt Using Alternating Electromagnetic Field

A new technology on continuous purification of galvanized zinc liquid through supergravity-induced filtration