Abstract:The soil-water characteristic curve (SWCC) is defined as the relationship between the suction and the water content or degree of saturation. The soil-water characteristics and related mathematical models can be used to model the unsaturated soil properties such as the permeability and the shear strength. Conventionally, only the drying soil-water characteristic curve of soil is determined. In this work, the influences of initial water content, initial dry density, the vertical stress and drying and wetting cycles are examined and discussed in detail. The SWCCs and hysteresis loops of residual soils in Xiamen were obtained by the filter paper method. The results show that the initial water content has negligible effect on SWCCs. The specimen at the wet of optimum moisture content (OMC) has the higher air entry value and the larger hysteresis loop than that of the soil specimen at the dry of OMC. The specimen with OMC lies between them. While, the initial dry density has considerable influence on SWCCs. The specimen at lower initial dry density exhibits smaller air entry value and higher rate of desorption than that of the specimen at higher initial dry density. The size of hysteresis loop decreases as the initial dry density increases. The specimens subjected to different vertical stresses have different SWCCs. The higher the applied load on the specimen, the higher the air entry value, the higher the rate of desorption, the smaller the size of hysteresis loop. In the drying and wetting process, the size of hysteresis loop has been substantially affected by the first drying and wetting cycle. With the increasing of drying and wetting cycle, the air entry value and the size of hysteresis hoop decrease. Since the features of soil-water characteristic of sandy clay are not well defined especially for the residual state of saturation, which desaturates continuously without a distinct break point, the residual suction or residual water content, one of the key parameters in the mathematical models of SWCC, is not well defined. As a result five improved models without the residual water content are proposed to describe the SWCCs of residual soil. The improved Gardner model has been found to be the most suitable model for all SWCCs of the residual sandy clay in Xiamen.

Modeling soil water retention curve with fractal theory

Evaluation of soil water retention curve with the pore–solid fractal model

A universal soil–water characteristic curve model based on the particle size distribution and fractal theory

Model for Estimating Soil Water Retention Based on Incomplete Fractal Theory

Estimation of Soil Water Retention Curve: an Asymmetrical Pore-Solid Fractal Model

A fractal-based soil - Water characteristic curve model for unsaturated soils

Fractal Characteristics And Fitting Analysis Of Soil-Water Characteristic Curves

Modeling soil water retention curves by pore fractal dimension based on microstructure image

Fractal-based hydraulic model of unsaturated flow in deformable soils considering the evolution of pore size distribution

A User-Friendly Modified Pore-Solid Fractal Model

A review of fractal, prefractal and pore-solid-fractal models for parameterizing the soil water retention curve

Fractal Models for Predicting Unsaturated Soil Hydraulic Parameters

Prediction of Hysteretic Soil and Water Characteristic Curve of Loess Based on Multifractal Theory and Improved Physical Statistics

Experiment And Modeling Of Soil-Water Characteristic Curve Of Unsaturated Residual Soil

A fractal hydraulic model for water retention and hydraulic conductivity considering adsorption and capillarity

An Empirical Soil Water Retention Model Based on Probability Laws for Pore‐size Distribution

Soil Mechanics of Unsaturated Soils with Fractal-Texture

ESTIMATING THE SOIL WATER RETENTION FROM PARTICLE-SIZE DISTRIBUTIONS: A FRACTAL APPROACH

A new water retention model that considers pore non-uniformity and evolution of pore size distribution

Characteristics of soil water retention curve at macro-scale

Calculation of Unsaturated Hydraulic Conductivity Using a Fractal Model for the Pore-Size Distribution