The Design of the Electronic Control System for Car Seat Based on MC68HC908

王秀芳,于随然

DOI: https://doi.org/10.3969/j.issn.1006-2394.2008.12.023

2008-01-01

Abstract:This design is based on MC68HC908,which is used as controller.The MC68HC908 controls the relays,namely controls the motion of the car seats automatically.This article focuses on the principle of the electronic system and provides the schematic circuit.

What problem does this paper attempt to address?

Design on the Electronic Control System of Car Seats and Back Mirror Based on MC68HC908

WANG Xiu-fang,LI Yuan-chao,YU Suiran

DOI: https://doi.org/10.3969/j.issn.1007-757x.2007.12.015

2007-01-01

Abstract:This design adopted MC68HC908 single -chip as the controller, to control the relay and the motor driver bridge circuit separately, so as to control the motion of the car seats and the back mirrors. This article focuses on the principle of the electronic system and presents schemas of corresponding circuits.
Application of LIN-bus to Seat and Rear-mirror Control System

Nie Dangen,Yao Wei,Zhang Wei,Qin Guoping

DOI: https://doi.org/10.3321/j.issn:1000-680X.2007.07.014

2007-01-01

Abstract:A car body control network for seat and rearmirror is constructed based on LIN bus,and the control of seat and rear-mirror with memory function is realized.Based on this,the functions of low power consumption and fault-self-diagnosis are also designed for the system,so the cost is reduced,providing a good solution for practical application.
Research on Application of μC/OS-Ⅱ in HEV control System

YANG HUA,YIN CHENGLIANG

DOI: https://doi.org/10.3969/j.issn.1008-0570.2007.05.107

2007-01-01

Abstract:The vehicle control system is one of key parts in hybrid electronic vehicle.This paper introduces the features of control sys- tem that has multitask and real time.This system based on Freescale MC9S12DP256 MCU and CAN bus is developed.The application of μC/OS—II to its embedded software design is put forward.And the transplant and application ofμC/OS—II are particularly de- scribed in detail.The theory and experiment shows this control strategy to be a system of better real time and higher reliability.
Design of an Intelligent Car System Based on Μc/os-Ii

Wenjun Yan

2006-01-01

Abstract:The application of RTOS μC/OS-II in a system of a mobile car based on the Samsung ARM7 micro processor S3C44B0X was mainly presents.By the scheduling method of multi-task RTOS,we solve the problem of poor real-time performance in single task design method,as well as improve the system's reliability.The transplant of μC/OS-II briefly was addressed first,and the whole design of system software and running regulation of individual task was elaborated.
Software Design of an Intelligent Car System Based on Μc/os-Ii

Yang,Yan Wenjun

DOI: https://doi.org/10.1109/chicc.2006.280780

2006-01-01

Abstract:This paper mainly presents the application of RTOS μC/OS-II in a system of a mobile car based on the Samsung ARM7 micro processor S3C44B0X. By the scheduling method of multi-task RTOS, we solve the problem of poor real-time performance in single task design method, as well as improve the system's reliability. In this paper, we first explain the transplant of μC/OS-II briefly, and then we elaborate the whole design of system software and running regulation of individual task.
Design and implementation of electric wheelchair controller

Shi Xiaohua,Wang Hongbo,Wang Jianjun

DOI: https://doi.org/10.19651/j.cnki.emt.2013.01.015

2013-01-01

Abstract:In order to reduce cost and improve the operation flexibility of the old and lower limb disabilities,we develop an electric wheelchair controller by using single-chip computer AT89S51.The paper introduces the composition and the function dodules,analyzes the principle of the control circuit that includes the classification of the H-bridge drivering circuit,the work process of power N-MOSFET,the parameter selection of the key components.Combined with the hardware,the directional control algorithm and the programs are designed.The experimental results show that the controller is easy to operation,flexible to control,suitable for driving higher-power DC motor and meets the operational needs of the old and lower limb disabilities.
Design of Intelligentized Multifunction Electrically Operated Rehabilitation Bed Based On MCS-51 Singlechip

Sheng-yuan JIANG,Yan-juan HU,Yao WANG,Jian-yong LI

DOI: https://doi.org/10.3969/j.issn.1007-080X.2008.06.020

IF: 3.379

2008-01-01

Mechatronics

Abstract:This thesis has designed the control system of intelligentized multifunction electrically operated rehabilitation bed which based on MCS-51 singlechip.By designing the hardware circuit,software program and system anti-jamming, the patient achieved that intelligently controlling the rehabilitation bed by automatically evading the roadblock and fixed time body posture adjustment,and achieved that automatization,intelligentizing of the medical treatment healing.The system has the characteristics of easily operate,high reliability,low cost.
Development of the Automatic Sssembly System for Car's Latch Based on Programmable Logic Controller

YAN Wen-jun,TU Fu-qi,ZHU Yi-qiang

DOI: https://doi.org/10.3969/j.issn.1001-4551.2000.03.034

2000-01-01

Abstract:The paper introduces the structure and the principle of the automatic assembly system for car's latch pieces based on Omron's programmable logic controller and it's designing method. The device can be used to assembly single or double latch piece. Also the software algorithm and the hardware configuration are provided.
Design and Application of CAN/LIN Gateway Controller in Automotive Body Network

Wei Wei,Yao Wei,Zhang Wei

DOI: https://doi.org/10.3969/j.issn.1000-3886.2008.02.014

2008-01-01

Abstract:Utilizing the different characteristics of CAN and LIN bus protocol,a CAN/LIN gateway controller is built based on the main MCU of MC68HC08AZ60A.The communication of CAN/LIN is fulfilled,also with the implementation of car body network control.And for actual application,the design of low power and fauh-self-diagnosis is finished.
Design of Intelligent Car Control System Based on STM32

Chao Sun,Aijuan Li,Guangpeng Xu,Chunpeng Gong

DOI: https://doi.org/10.1109/ICARM58088.2023.10218918

2023-07-08

Abstract:Smart cars are widely used in various industries, and their operating status is crucial to the production safety of the industry. In this paper, a set of intelligent car control system is designed based on STM32F103C8T6 microcontroller, and the automatic control of the car is studied. The study selects a black rectangular field with white borders around it as the external environment for the car to run. Under the premise of ensuring that the car does not cross the boundary, the car can automatically cruise in the area and avoid obstacles when it encounters them. Firstly, establish the design idea of the control system and complete the construction of the car model; Secondly, design the overall scheme of the hardware system and program; Then use the oscilloscope to collect and verify the motor pulse signals and sensor output signals of the car under various working conditions; Finally, while maintaining a certain speed of the car, several real-vehicle verifications were carried out on the obstacle avoidance and sideline detection of the car. The results show that the car can well complete functions such as forward, backward, speed regulation, and obstacle avoidance. The automatic control system runs stably and has high reliability.

Engineering,Computer Science
Intelligent Car Control System Design Based on Single Chip Microcomputer

Shiying Wang

DOI: https://doi.org/10.1007/978-3-030-79197-1_127

2021-01-01

Abstract:With the continuous progress of science and technology and the development of social productivity, more and more high-tech products are entering people’s lives. The article introduces an intelligent car control system based on ATMEGA32 single-chip microcomputer. The system uses single-chip microcomputer as the core, uses photoelectric sensors for tracking, and ultrasonic sensors for obstacle avoidance detection, so as to control the different operating modes of the motor and realize the different movement modes of the car. The article completed the hardware design and software programming of the system, so that the trolley can complete the functions of automatic tracking and automatic obstacle avoidance, so that it can walk on a predetermined trajectory in a general environment, and avoid obstacles during construction operations. Objects to prevent work errors caused by collisions. The smart car can be used in warehouse transportation, item sorting, sweeping robots and other fields. Through the detection and determination of fixed lines and non-fixed obstacles, it can complete automatic transportation while ensuring its normal and stable operation. This design has more advantages. Wide application value.
Design of Parking Controller Based on PSoC

CHEN Gao,YAO Wei,LI Zongya

DOI: https://doi.org/10.13667/j.cnki.52-1046/th.2010.05.032

2010-01-01

Abstract:PSoC of company cypress has been wide used because of its powerful functions and flexible exploitation.This article puts forward a design of parking controller based on PSoC,at the same time gives the system software and hardware design.Compared with common parking lock,the one that is based on CY8C29466 uses wireless remote control to lock or unlock the parking lock.There is no need for users to get off and operate manually,so it is more convenient.
Design of Intelligent Charger Based on 68HC08 MCU

MAO Chang-liang,SHU Guo-hua,ZHANG Shi-wen

DOI: https://doi.org/10.3969/j.issn.1000-100x.2007.07.017

2007-01-01

Abstract:An intelligent charger which has universal input and adjustable current and voltage was designed on the basis of 68HC08 MCU and UC3842.The protective and control function are explained according to the power circuit and control circuit.The experimental results prove that the intelligent charger has the quality of higher regulation of voltage and efficiency and good performance.
A distributed wireless hydraulic pressure servo system based on MC68HC908 microcontroller

ZHOU Kai

2008-01-01

Abstract:Intending to meet the requirement of developing an intelligent process equipment system for machining aircraft ’s curved surface, a novel methodology is delivered in this paper, which has been further developed into a multi -points matrix dis- tributed wireless hydraulic pressure control system based on MC68HC908 microcontroller. The proposed system is composed of par- allel microcontrollers and driven by application software. It also presented in this paper that the framework of the entire project, as well as the implemented hardware circuit and the software algorithm.
Design of Intelligent Car Control System Based on Arduino

Jianwei Zhao,Yu Ban,Yi Wang,Zhao Wang,Fuyong Wang,Guangming Xie

DOI: https://doi.org/10.7690/bgzdh.2015.05.019

2015-01-01

Abstract:In order to improve the performance of the intelligent car, an intelligent car control system based on Arduino is designed. The system hardware consists of six modules, compare and choose each module of the core control board with the key module; control software part by mobile terminal application control, realize the human perception, autonomous obstacle avoidance and human-computer interaction and other functions. The results show that the development of the system is low cost, and is easy to be popularized, and it is suitable for many occasions such as education, family and so on.
The design and implementation of an electronic control system for HEV

Gang CUI,Li-jiang YAN,Feng QU

DOI: https://doi.org/10.3969/j.issn.1005-5517.2003.18.030

2005-01-01

Abstract:A Hybrid Electric Vehicle (HEV) is a kind of car driven by both a gas engine and an electromotor. Its advantages are energy savings and environmental protection. It is necessary for an HEV to control two coexistent drives by digital systems. An HEV with an electronic control system shows higher performance than traditional cars. The system is composed of one control kernel called the multi-energy managing unit and five independent intelligent nodes. All these nodes are connected by a Controller Area Network (CAN) and are managed with an excellent control mechanism.
Design of Intelligent Car Door Control System

Qi Liu,Shaocheng Qu

DOI: https://doi.org/10.1109/AUTEEE50969.2020.9315577

2020-01-01

Abstract:This paper firstly points out that the present car door on market may lack intelligent control which can bring trouble and potential safety hazards to traffic. Secondly, it discusses and compares the characteristics of immovable home door, traditional car door and mobile home door, hope to find the possibility of transferring immovable home door technology to traditional car door. Also, it indicates that the mobile home can be seen as a bridge role between immovable home and traditional car which may give experiment support for intelligent car door control system design. Thirdly, it supplies a real object called “a mobile home system based on stm32” as a platform to conduct the experiments for actual design, combined with six sensors following two scheduled flow charts. The design of intelligent car door control system can give relief to traffic accidents due to car door problems, which may promote the development of autonomous driving technology.
Design of Fuzzy Adaptive Controller for Small Smart Car System Via CCD Camera

Shaocheng Qu,Lin Ai,Yao Tian,Haiyan Liu

2010-01-01

Abstract:An small smart car system based on MCU SPCE061A and MCU 89S52 was presented. CCD camera was used as its path recognition device to extract path information through image recognition. Based on fuzzy strategy and the least square method, two-dimensional information involving gear angle between the car and the path were measured. Then PD controller was implemented to adaptively control the DC motor, which can guarantee the accurate path trace. Finally, experiment results show that the affectivity of the proposed small smart car.
A Design for Wireless Control and Motor Show Module System Based on CC430

YANG Wei

DOI: https://doi.org/10.3969/j.issn.1002-2279.2013.05.012

2013-01-01

Microprocessors

Abstract:According to the rapid development of wireless communication technology,application of wireless communication technology in control system will be more popular. The design is based on SimpliciTI protocol and CC430RF5137Soc( system on a chip) from TI. The designs of hardware and software and low power consumption are discussed in detail,which can control the relay of master control board to close by pressing the buttons of remote-control unit and then show the result by means of indicators on or off.
Design of Anti-Pinch Window Lift Control Module

Jing Xin Chang,Wen Song Wu,Feng Luo

DOI: https://doi.org/10.4028/www.scientific.net/amm.446-447.1234

2013-11-01

Applied Mechanics and Materials

Abstract:This paper puts forward a control scheme based on LIN bus for automotive anti-pinch power window. The article first gives an overview of the structure and function of the system, and then describes the design of the hardware and software in detail. We choose a 16-bit Freescale chip MC9S12VR64 which has a mixed signal processing performance as the microcontroller. The anti-pinch algorithm is mainly based on the Hall signal, and the network communications use LIN bus. Finally, through trial and error to amend the anti-pinch algorithm, we get a satisfactory result.

English Else

The Design of the Electronic Control System for Car Seat Based on MC68HC908

Design on the Electronic Control System of Car Seats and Back Mirror Based on MC68HC908

Application of LIN-bus to Seat and Rear-mirror Control System

Research on Application of μC/OS-Ⅱ in HEV control System

Design of an Intelligent Car System Based on Μc/os-Ii

Software Design of an Intelligent Car System Based on Μc/os-Ii

Design and implementation of electric wheelchair controller

Design of Intelligentized Multifunction Electrically Operated Rehabilitation Bed Based On MCS-51 Singlechip

Development of the Automatic Sssembly System for Car's Latch Based on Programmable Logic Controller

Design and Application of CAN/LIN Gateway Controller in Automotive Body Network

Design of Intelligent Car Control System Based on STM32

Intelligent Car Control System Design Based on Single Chip Microcomputer

Design of Parking Controller Based on PSoC

Design of Intelligent Charger Based on 68HC08 MCU

A distributed wireless hydraulic pressure servo system based on MC68HC908 microcontroller

Design of Intelligent Car Control System Based on Arduino

The design and implementation of an electronic control system for HEV

Design of Intelligent Car Door Control System

Design of Fuzzy Adaptive Controller for Small Smart Car System Via CCD Camera

A Design for Wireless Control and Motor Show Module System Based on CC430

Design of Anti-Pinch Window Lift Control Module