Abstract:<p>The pipeline safety management system is crucial to transfer oil and gas because the phenomena of leakage commonly occurs in the long-distant pipelines. Hidden safety hazards can be caused by design and construction defects, affected by natural disasters, or corroded by the transmission fluid. Therefore, quick detection will not only reduce the loss of transported oil and gas but also can protect the local environment. In this study, we develop a new method to detect the pipeline leak by analyzing pressure distribution through the leak. Pipeline leak detection tests are operated using a flow loop. Through the experiments, four parameters which are pressures and flow rates of pipeline inlet and outlet are recorded. Then the specific location of the leak is determined by dimensionless analysis of flow parameters. To generate the solution to locate the leak, we introduce three dimensionless variables, which are dimensionless leak location, dimensionless leak rate, and dimensionless pressure drop. Then the relationship of pressure distribution and leak parameters is built through the simulation models. After running 3D computational fluid dynamics (CFD) simulations with commercial software (FLUENT), the pressure distribution in the pipeline with leakage in the experiments will be verified by the experimental data. Finally, the mathematical models are developed to detect and evaluate the leakage through the pipeline. CFD simulation results show that both the leak rate and location have significant effects on the pressure distribution through the pipe, which is identical to the outcome from the experiments. When the dimensionless leak location is smaller or the dimensionless leak rate is larger, the dimensionless pressure drop is smaller. The mathematical model which is based on these dimensionless variables can be applied in locating the leak point in the real accident.</p>

Analysis of Real-Time Simulation and Dynamic Response for Liquid Pipelines

Leak Simulation for Liquid Pipelines

A Simplified Analytical Solution of Pipeline Response under Normal Faulting

Analytical Solution for Tunnelling-Induced Response of an Overlying Pipeline Considering Gap Formation

A Study of Dynamic Characteristics of Valve Control Hydr Aulic System with Long Pipeline

Pipeline parameter identification of non-stationary flows based on LabVIEW

The Analysis on the Response Characteristics of Pipelines With Changing Parameters Under Random Traffic Loads

Impact of Transient Energy Loss on Pipeline Leak Detection

Diagnosis of the single leakage in the fluid pipeline through experimental study and CFD simulation

Simulation and experimental verification on fluid-structure interaction of T-shaped pressure pipeline

Frequency response function method for dynamic gas flow modeling and its application in pipeline system leakage diagnosis

Liquid pipeline leak detection system: model development and numerical simulation

Transient Analysis of the Gas-Liquid Two Phase Flow in Long-Distance Water Pipelines

Leak Detection and Location in Liquid Pipelines by Analyzing the First Transient Pressure Wave with Unsteady Friction

A Calculation Model for Leak Detection and Location of Single Pipeline with Two Leaks

Analysis of Transient Flow in Pipelines with Fluid-Structure Interaction Using Method of Lines

Semi-analytical dynamic modeling and fluid-structure interaction analysis of L-shaped pipeline

The Failure Window Method and Its Application in Pipeline Burst

Transient Wave-Leak Interaction Analysis for Improved Leak Detection in Viscoelastic Pipelines

Semi-analytical Solution for Dynamic Behavior of a Fluid-Conveying Pipe with Different Boundary Conditions

Adaptive thresholds‐based leak detection using real‐time transient modeling of two‐phase flows