Abstract:All spacecrafts in low orbit are subjected to hypervelocity impacting by meteoroids and space debris. These impacts can damage spacecraft flight-critical systems, leading to catastrophic failure of the spacecraft. In order to protect the safety of an orbiting spacecraft, the shield for meteoroids and space debris becomes an indispensable factor in the design of a spacecraft, especially those with long orbital life and large size structures. Because the major debris-cloud represents the most severe threat to rear wall integrity, researches on the major debris-cloud features are very important. In this paper, the numerical simulations for major debris-cloud features produced by a sphere projectile normal impacting on a single-sheet bumper at hypervelocity have been carried out using the SPH technique of AUTODYN. The major debris-cloud features include the effects of debris-cloud morphology, normalized axial velocity and radial velocity. These features vary with bumper-thickness-to-projectile-diameter ratios (t/D) and impact velocities. The impact velocities are from 1 to 14km/s. The bumper and projectile materials are aluminum. The ratio t/d is from 0.0105 to 0.525. Effects of impact velocity and t/d on the major debris-cloud features have been investigated. It is shown that the major debris-cloud features have remarkable differences with various t/d and impact velocities. As the t/D ratio is increased and impact velocity is constant, the major debris-cloud morphology varies. The diameter of center element and the radial debriscloud velocities increases. At the same time, radial expansion and the shell of spall fragments at the rear element, size of fragments in the center and rear elements and the axial debris-cloud velocities decreases. As t/D ratio is held constant, debris-cloud hardly occurs at the low velocity. As the impact velocity increases, fragmentation of sphere and radial expansion of internal elements increase. At the same time, the axial debris-cloud velocities increase and the radial debris-cloud velocities increase. The simulation results show that the bumper thickness has an optimizing value.

Experimental Investigation for Normal Impact on Single Bumper Shield at First Threshold Velocity Range

Experimental Investigation of Bumper Thickness Effect on Damage of Aluminum Dual-Wall Structure by Hypervelocity Impact

Numerical Simulations of Fragmentation Onset Velocity of Projectile Impact on Thin Bumper

Experimental investigation into AL-bumper thickness effect on damage of whipple shield under hypervelocity impact

Numerical Simulation of Major Debris-Cloud Features Produced by Projectile Hypervelocity Impact on Bumper

Experimental investigation of high-velocity impact on aluminum alloy Whipple shield

Experimental investigation on aluminum bumper with ceramic surface coating impacted by an aluminum sphere

Numerical simulation of characteristics of debris cloud produced by projectile hypervelocity impact on bumper

A Study of AL-bumper Thickness Effect on Damage of Whipple Shield by Hypervelocity Impact of AL-spheres

Damage Behavior of TiB2-based Ceramic Composites under Hypervelocity Impact

Investigation into Debris Cloud Characterizations for Oblique Hypervelocity Impact of Projectiles on Bumper

Numerical Simulation of Debris Cloud Produced by Ellipsoidal Projectile Hypervelocity Impact on Bumper

Experimental and Numerical Study on the Mesh Bumper by Hypervelocity Impact

Numerical Simulation of Non-Spherical Projectiles Hypervelocity Impact on Spacecraft Shield Configuration

Experimental Investigation of Resist Capability about Aluminum Dual-Wall Structure by High-Velocity Impact

Hypervelocity Impact of TiB2-based Composites As Front Bumpers for Space Shield Applications

Investigation into damage of Al-mesh bumper under hypervelocity Al-spheres impact

Effects of Bumper Lateral Size on High-Velocity Impact Damage to Whipple Shield

Effect of using small-sized bumper on Whipple shield in high velocity impact tests

A study of damage AL-mesh bumper by hypervelocity impact of AL-spheres

Experimental Investigation of Woven Bumper Shield Impacted by a High-velocity Aluminum Sphere at Different Ambient Temperature