Abstract:Excessive midspan deflection is often observed in large-span prestressed concrete girder bridges. In particular, the deformation caused by shrinkage and creep of concrete is an important part of deflection that often exceeds expectations. To achieve creep deformation control, extending the curing time and postponing the loading age are frequently adopted during construction. This article proposed an approach based on creep experiments with prismatic and beam specimens and viscoelastic model-based finite element analyses to evaluate the effect of the concrete strength development factor on the ultimate creep coefficient in the Comite Euro-International du Beton-Federation internationale de la precontrainte (CEB-FIP) model. The concrete strength development factor xi(cc)(t/t(u)) is defined as the ratio of the mean compressive strength at the loading time to the maximum mean compressive strength obtained in the test. The strategies for targeted regulation and control of xi(cc)(t/t(u)) were discussed by establishing an artificial neural networks model for strength prediction from a database provided in our previous work. Uniaxial compressive prismatic specimens and pure bending beam specimens with a span of 5.0 m were used in the experiment for creep behavior observation. A viscoelastic finite element analysis (FEA) model was established based on solidification theory. The FEA model results were verified with measured data for capturing the creep behavior under ambient conditions to obtain reliable long-term creep deformation predictions. Finally, the proposed method was validated with the Xincheng bridge construction for the optimistic loading age determination, and the results indicated good feasibility in girder deflection control.

Deflections of Steel-Concrete Composite Beams Due to Shrinkage and Creep

Long Term Deformation Analysis of Shrinkage and Creep of Steel-Concrete Composite beams

Bending Stiffness of Steel-Concrete Composite Beams Considering Effect of Slip

Calculation of Long-Term Slippage for Externally Prestressing Steel-Concrete Composite Beam

Long-term Behavior of Composite Beams with Shrinkage, Creep and Cracking(ⅱ):Theoretical Analysis

A RESTUDY ON STABILITY OF STEEL BEAMS:HISTORICAL EVOLVEMENT AND DEFICIENCIES OF CHINESE CODE (Ⅰ)

Reduced Stiffness of Composite Beams Considering Slip and Shear Deformation of Steel

Long-term Behavior of Composite Beams with Shrinkage, Creep and Cracking (I): Experiment and Calculation

Composite Shear Behavior of Steel-Concrete Composite Beams under Sagging Moment

Calculation of Deflection and Stress of Assembled Concrete Composite Beams under Shrinkage and Creep and Its Application in Member Design Optimization

Analyses on long-term behavior of composite steel–concrete beams with weak interface using a state space approach

Time-dependent behavior of PC box girder bridges considering non-uniform shrinkage and creep

Effects of Shrinkage and Creep Strains on Bending Behavior of Steel-Concrete Composite Beams

Long-Term Behavior of Composite Beams under Positive and Negative Bending. Ii: Analytical Study

LONG-TERM DEFLECTION PREDICTION OF REINFORCED CONCRETE BEAMS

Calculation of Creep Deformation of Stiffness-Degraded RC Beams after Strengthening with Increased Cross-Section

Evaluating the Effect of the Compressive Strength Development Factor on Concrete Creep Deformation in Bridge Construction

The influence of steel reinforcement on creep and shrinkage of concrete columns

Time-dependent creep and shrinkage analysis of curved steel–concrete composite box beams

Research on Long-term Deformation of Concrete-filled Steel Tubular Stubs with Expansive Additive under Axial Loading

Behavior and Design of Slender Concrete-Filled Wide Rectangular Steel Tubular Columns under Axial Compression