The Reuse of Gold Tailings as Fill Material for Depleted Mines
Min Hu,Na Guo,Zhangmei Hu,Mulan Mu
DOI: https://doi.org/10.1007/s10230-024-00985-3
2024-06-05
Mine Water and the Environment
Abstract:The accumulation of gold mine tailings poses an environmental challenge. The feasibility of reusing this waste to fill underground mines was investigated. The tailings were mixed with Portland cement and water using a one-step method. The fluidity, bleeding rate, setting time, mechanical behavior, water quality analysis, and toxicity characteristics of the leachates with various tailings/cement ratios and slurry concentrations were characterized and assessed. The results show that secondary hydration reactions occurred between the tailings and the cement. The rheological properties, setting/hardening properties, and bleeding rate became less favorable with increases in the tailings/cement ratio and slurry concentrations. The uniaxial compressive strength of the filling materials prepared with a tailings/cement ratio of 4:1 and a slurry concentration of 68% was 0.99 MPa, which met the filling purposes. The water quality index of the leaching solution was acceptable, with the concentrations of copper (Cu 2+ ), zinc (Zn 2+ ), cadmium (Cd 2+ ), lead (Pb 2+ ), total chromium (Cr 3+ and Cr 6+ ), hexavalent chromium (Cr 6+ ), beryllium (Be 2+ ), barium (Ba 2+ ), silver (Ag + ), selenium (Se 2− ), nickel (Ni 2+ ), mercury (Hg 2+ ), arsenic (As 2+ ), fluoride (F − ), and cyanide all much less than the standard limits. This indicates that gold mine tailings could be used as fill material to reduce waste accumulation without causing any hazards to the environment or human beings.
water resources