Abstract:Voltage sags have become one of the most important power quality issues in recent years. According to survey results across the US, voltage sags and short duration power outages account for 92% of power quality problems encountered by industrial customers. Voltage sags often causes undervoltage faults in various sensitive loads and subsequently interrupt manufacturing processes. Such interruptions often inflict severe losses for industries. The existing sag compensation systems accomplish fast response within small fraction of a fundamental cycle by tracking the line voltages closely, and switch on the compensator whenever the voltage waveforms deviate from the normal values. However, utility voltages often contain surges and spikes with amplitudes up to 200% resulting from the switching of power factor correction capacitors and lightning strikes. Such transient disturbances may trigger the sag compensator into operation if the controller is very sensitive. The switching frequency of the compensation inverter is insufficient to compensate the narrow pulses of voltage spikes. Furthermore, the power semiconductors of the inverter may also be damaged by the surges. In this paper, a synchronous reference frame (SRF) based sag compensation scheme are presented. A sag detection mechanism is included in the controller for correct and prompt identification of voltage sags. Disturbances like voltage spikes are attenuated to avoid any false triggering of the compensator. The overall system responds to voltage sags and restore the voltage back to balanced 1.0 pu. for the critical loads within one-eighth to one-fourth of a cycle, which meet the requirement of ITI standard and SEMI-F47 standard. Simulation and laboratory test results will be presented to verify the functionality of the proposed controller.

Detection Technology of Voltage Sag Based on SPLL

Novel Method for Detecting Synchronous Phases and Instantaneous Symmetrical Components

Voltage Sag Detection Based on Improved PLL

A New Algorithm for Software Phase Locked-loop and Voltage Sag Detection

Study on Detection Method of Distorted Voltage Sag in Distribution Network under the Background of Incorporating New Energy

A Fast Voltage Sag Detection Method Based on Second Order Generalized Integrator and Delay Transform Method

A Hybrid Phase-Locked Loop for the Transient Stability Enhancement of Voltage Source Converters

A Novel Voltage Sag Detection Method Based on a Selective Harmonic Extraction Algorithm for Nonideal Grid Conditions

A Modified Soft Phase Lock Loop Algorithm Improving the Performance in Dynamic Phase Tracking and Detection of Unbalanced Voltage

An Adaptive Phase-Locked Loop to Improve Stability of Voltage Source Converters in Weak Grids

Asymmetric Voltage Sag Detection Method Based on Delay Small Angle Method and Moving Average Filter

APPLICATION OF SOFT PHASE LOCKED LOOP TECHNIQUE IN DYNAMIC VOLTAGE RESTORER

Magnitude Detection And Phase Synchronization Of Unbalanced And Distorted Grid Voltage With Novel Extended Pll Loop Filter

Detection Method of Power Quality Disturbance Based on an Improved PLL System

Voltage Sag Source Location Based on Instantaneous Energy Detection

Digital identification of voltage sag in distribution system

An Adaptive Power Control Method for Soft Open Points Based on Virtual Impedance

On Transient Instability Mechanism of PLL-Based VSC Connected to a Weak Grid

Sag Detection Algorithm for Dynamic Voltage Restorer Used in Wind Farms under Unbalanced and Distorted Grid Voltage Conditions

Study of Voltage Sag Detection and Dual-Loop Control of Dynamic Voltage Restorer

Design and Implementation of a Series Voltage Sag Compensator under Practical Utility Conditions