Abstract:The flexible plate/shell with variable thickness has many advantages, such as reducing the structural weight, improving the load capacity, raising the overall material utilization ratio and optimizing the stress distribution, etc. The absolute nodal coordinate formulation (ANCF) method provides the possibility for the reasonable modeling of variable thickness plate/shell and the study of flexible large deformation mechanisms. However, the traditional modeling and analysis of variable thickness plate/shell mainly focused on the vibration characteristics based on lower-order ANCF plate/shell element, in which the linear interpolation is used in the transverse direction and there exists the locking problem. Given this, a new higher-order plate/shell element with quadratic interpolation in the transverse direction for dynamic analysis of flexible plate and shell with variable thickness denoted as ANCF-VT3833 is developed in this paper. This new element employs an algebraic function h ( x , y ), called the thickness function, to describe any thickness distribution of the plate/shell. With the use of the thickness function, it is convenient to consider changes in thickness in the calculation model of the element matrix. To verify the feasibility of the proposed new element, a flexible pendulum test was carried out. The results obtained by the new element are in good agreement with those obtained by the traditional finite element method. Furthermore, the dynamic simulation analysis of the uniform thickness, linearly and quadratic variable thickness plates is conducted to study the influence of thickness distribution on the deformation and stress of flexible plates. The results show that the thickness distribution significantly influences the dynamic response of flexible plates. Finally, it is concluded that the ANCF-VT3833 element proposed in this paper has advantages in predicting large deformation of the flexible plate and shell with variable thickness, and can be used to analyze the mechanical effects caused by thickness distribution, as well as to provide a theoretical basis for structural optimization and rational design of thickness distribution.

DEGENERATED SOLID PLATE ELEMENT AND ITS APPLICATION TO VIBRATION ANALYSIS OF PLATES

Analytical 3-D P-Element for Quadrilateral Plates - Part 1: Thick Isotropic Plate Structures

TRIANGULAR THIN-PLATE ELEMENT BASED ON VECTOR FORM INTRINSIC FINITE ELEMENT

New p-version plate elements and applications in structural vibration analyses

A NEW TYPE OF PLATE BENDING ELEMENT

Three-layer Shell Method for Plate-cone Reticulated Shell

Stability analysis of thin-walled members by degenerated three-dimensional beam element method

3D Virtual Laminated Plate-Shell Element and Its Application

Dynamics and Active Control of Largely Deflected Active Structures Using the Finite Element Technique

Eight-node incompatible solid-plate element

A Linear-Theory of Piezoelastic Shell Vibrations

Direct analysis for plate and shell by three-dimensional element free Galerkin method

Analytic 3-D P-Element for Vibration Analyses of Plates, Part 2: Laminated Plates

Geometric Nonlinear Analysis of Plate-cone Reticulated Shell by Generalized Conforming Finite Element

THERMALLY INDUCED VIBRATION ANALYSIS OF THIN COMPOSITE PLATE BASED ON HYBRID ELEMENT MODEL

A Hybrid Analytical And Finite Element Method For Mid-Frequency Vibration Analysis Of Plate Structures With Discontinuities

Nonlinear Dynamic Analysis of Shell Elementwith a Relative Degree of Freedom

TheFinite Element Modeling and Experimental Study of Sandwich Plates with Frequency-Dependent Viscoelastic Material Model

A new higher-order plate/shell element for dynamic analysis of flexible plate and shell with variable thickness

Large deformation study of shell with assumed strain and its application in impact dynamic analysis

A Comparative Study Of Axisymmetric Finite Elements For The Vibration Of Thin Cylindrical Shells Conveying Fluid