Abstract:This paper presents a practical network platform to design and implement a networked-based cascade control system linking a Smar Foundation Fieldbus (FF) controller (DFI-302) and a Siemens programmable logic controller (PLC-S7-315-2DP) through Industrial Ethernet to a laboratory pilot plant. In the presented network configuration, the Smar OPC tag browser and Siemens WinCC OPC Channel provide the communicating interface between the two controllers. The paper investigates the performance of a PID controller implemented in two different possible configurations of FF function block (FB) and networked control system (NCS) via a remote Siemens PLC. In the FB control system implementation, the desired set-point is provided by the Siemens Human-Machine Interface (HMI) software (i.e, WinCC) via an Ethernet Modbus link. While, in the NCS implementation, the cascade loop is realized in remote Siemens PLC station and the final element set-point is sent to the Smar FF station via Ethernet bus. A new fuzzy PID control strategy is then proposed to improve the control performances of the networked-based control systems due to an induced transmission delay degradation effect. The proposed strategy utilizes an innovative idea based on sectionalizing the error signal of the step response into three different functional zones. The supporting philosophy behind these three functional zones is to decompose the desired control objectives in terms of rising time, settling time and steady-state error measures maintained by an appropriate PID-type controller in each zone. Then, fuzzy membership factors are defined to configure the control signal on the basis of the fuzzy weighted PID outputs of all three zones. The obtained results illustrate the effectiveness of the proposed fuzzy PID control scheme in improving the performances of the implemented NCS for different transportation delays.

Design of Fuzzy Adaptive PID Temperature Controller Based on FPGA

Temperature Control of Glyphosate Process Based on Fuzzy PID Control

Fuzzy predictive PID controller based on output-error prediction and its application

An Self-adapting Fuzzy Control of Pump Controlled Motor System under Extreme Conditions

The design of a temperature controller based on Fuzzy-PID technology

Oil temperature control of large hydraulic system

Self-tuning-parameter Fuzzy PID Temperature Control in a Large Hydraulic System

Application Study of Fuzzy Immune PID Algorithm in Temperature Control System

A Developed Method of Tuning PID Controllers with Fuzzy Rules for Integrating Processes.

Application of self-adaptive fuzzy PI control in the air-conditioning system

TEMPERATURE CONTROL OF ELECTRIC FURNACE USING PID CONTROLLER BASED GWO ALGORITHM AND FPGA IMPLEMENTATION

Adaptive Fuzzy PID Control Design and Simulate of Main Steam Temperature of Power Plant

A design and simulation of fuzzy PID controller for the optimization of temperature and humidity in the thermodynamic system

Design of temperature control system for infant radiant warmer based on Kalman filter-fuzzy PID

Application of Fuzzy Single-neuron PID in Workshop Temperature Control System

Design and implementation of a new fuzzy PID controller for networked control systems

Development of Intelligent Building Energy-saving Temperature Control System Based on FPGA

GA Optimized Fuzzy PID Control with Modified Smith Predictor for HVAC Terminal Fan System

Design and Performance Analysis of Fuzzy-Pid Controller

Fuzzy adaptive PID control for VAV air-condition system

The Fuzzy Model PID Optimization Control Designed for a Heat Exchange System in a Packed Tower