The Investigation of Axial Compressor With Aggressive Flow Path Near Stall Condition
Lele Ming,Yadong Wu,Ouyang Hua
DOI: https://doi.org/10.1115/1.0002660v
2021-01-01
Abstract:Abstract Rotating stall is an unsteady flow phenomenon in flow rate reduction process of axial compressor. Single or multiple stall cells can be found in blade passage, rotating circumferentially at frequency ranging from 20% to 80% of compressor rotating frequency. Rotating stall may further lead to surge, then mass flow and pressure ratio of the compressor decrease rapidly while vibration amplitude of bearing fulcrum increases significantly, which would affect safety operation of the aero-engine. This paper reports the study on a multistage compressor with special-shaped aggressive flow path, which is significantly different from the conventional compressor with its meridian flow path midline parallel or nearly parallel to the rotating shaft axis. To study rotating stall and surge characteristics of multistage compressor with inlet distortion, this paper takes a 4.5-stage axial compressor as research object which has special S-shaped meridian flow path. On SJTU compressor test facility, the author carries out multidisciplinary tests on compressor dynamic performance (stator LE/TE and inter-stage fluctuating pressure measured by fluctuating pressure transducers, vibration measured by acceleration transducers, and dynamic stress measured by pasting strain transducers on the surface of stator blade). And in subsequent surge experiment, stall and surge signals at different rotating speeds are successfully captured. With above test data, axial, radial and circumferential instability development characteristics are studied by time domain correlation analysis, frequency domain power spectrum and coherence analysis, which preliminarily reveals the generation, development, propagation and elimination characteristics of rotating stall and surge. Meanwhile, in view of time-frequency characteristics of two instability transition processes, time-frequency analysis method based on Choi-Williams distribution model is adopted to capture instantaneous frequency characteristics. The results show that instability phenomenon exhibits quasi-exponential change in instability transition processes. Compared with traditional methods, time-frequency method is more effective in characterizing strong time-varying instability signals such as rotating stall and surge.