Abstract:Due to ageing of the bridge stock, continuously increasing load requirements, the need for assessing existing bridges is becoming increasingly important. Reinforced concrete (RC) bridge deck slabs are among the most critical parts to the load carrying capacity of bridges. Previous research indicated that the assessment method used in current practice largely underestimate the load-carrying capacity. The objective of the study reported in this licentiate thesis is to develop and calibrate improved methods for assessment of load-carrying capacity and response of existing bridge deck slabs. This study proposes an enhanced assessment through improved structural analysis and resistance evaluation in order to achieve higher detectable load-carrying capacity. To achieve this objective, the scientific approaches including literature study, laboratory tests, analytical analyses and finite element analyses were adopted. Two major studies and a series with supporting tests were conducted as following: A large test series, in which three specimens containing traditional steel bar reinforcement in ordinary concrete, were carried out to study the load carrying capacity and structural behavior of two-way slab. A proposed multi-level assessment method was validated through two case studies: a two-way slab and a cantilever slab. The multi-level assessment method includes simplified analysis, 3D linear FE analysis, 3D nonlinear analysis with shell elements, 3D nonlinear FE analysis with continuum elements include fully bonded reinforcement as well as 3D nonlinear FE analysis with continuum elements including bond-slip for the reinforcement. To develop the modeling strategies for two-way RC slabs with continuum elements, parameter studies has been carried out to investigate the influence of different modeling choices. Parameters including finite element properties, modeling of concrete, modeling of reinforcement and stiffness of supports were varied in different comparative models to investigate the influence. The study shows that existing methods currently used in assessment are not able to accurately reflect the response of RC bridge deck slabs, and underestimate their capacity. With enhanced assessment methods, such as the nonlinear finite element method, it is possible to better reflect the structural behavior, and more accurately determine the load carrying capacity. Two case studies have proven that the multi-level assessment method is able to reflect the structural behavior at different levels of approximation, which is beneficial in evaluating existing RC slabs. The parameter studies indicate that modeling choices such as geometric nonlinearity, crack bandwidth and Poisson’s ratio have significant impact on determination of the load-carrying capacity. Finite element properties, reinforcement model and stiffness of supports influence crack pattern and load distribution respectively.

Evaluation System for Existing Simply Supported Beam Type Reinforced Concrete Bridge Structures in Beijing

Structural Analysis of Existing RC Bridge Deck Slabs Structural Analysis of Existing RC Bridge Deck Slabs

Study on Evaluation of the Status of Underwater Concrete Structure of Bridges

Research on bridge state evaluation based on anfis

Application of Adaptive Neuro-Fuzzy Inference System in Bridge Condition State Evaluation

Method for evaluating durability of existing concrete bridges structures

Repair and Strengthening Assessment of Existing Bridges Based on Time-Dependent Reliability Analysis

Remote Collaborative Pseudo-dynamic Testing of Carbon Fiber Reinforced Plastic Retrofitted Reinforcement Concrete Short Columns of Bridge

Dynamic evaluation for simply supported reinforced concrete beam with considering the influence of overload

Improved bridge capacity rating methods based on system reliability assessment

Analysis and strengthening of substructure diseases of concrete bridges in China

EVALUATION OF BENDING STIFFNESS FOR=EXISTING SIMPLY SUPPORTED RC BRIDGE BEAMS

Research on Evaluation System of Bridge Disaster Resilience

Disease Analysis and Reinforcement of Concrete Bridge Substructure

An improved model for assessment of the durability of existing reinforced concrete bridges

Reinforcement Analysis of an Old Multi-Beam Box Girder Based on a New Embedded Steel Plate (ESP) Strengthening Method

Healthy monitoring and altering system on-line of bridge structures Ⅰ——Design for monitoring assessment,altering system and modules

Analysis and strengthening of superstructure diseases of concrete bridges in China

Bridge Rating Using System Reliability Assessment. I: Assessment and Verification by Load Testing

Reinforced Concrete Multi-Rib Arch Bridge Strengthened by Changing Structural System

System Reliability Evaluation of Prefabricated RC Hollow Slab Bridges Considering Hinge Joint Damage Based on Modified AHP