Abstract:Under the action of the fluctuating wind load, the low frequency part produces background response to the structures, while the high frequency part produces resonance response to the structures. In structural design, equivalent static wind load is usually used to equate the fluctuating wind load. Although there are various methods of evaluating the equivalent static wind load, they did not consider the correlation between modal responses or considered them insufficiently. Therefore, in this paper, the correlation between modal response is considered to evaluate the equivalent static wind load, the displacement response is decomposed by proper orthogonal decomposition (POD) method, the correlation between modal displacement is removed, the equivalent static wind load is expressed in the form of displacement mode, and then the correlation between modal response is fully considered in the extreme value combination. This paper combines the equivalent static wind loads in order to make the wind resistance design more reasonable for high‐rise buildings. First, the formulas of equivalent static wind loads expressed by displacement modes of background and resonant response are deduced based on modal decomposition and POD method. Second, the combination formulas of square‐root‐of‐sum‐square (SRSS) and complete‐quadratic‐combination (CQC) rules for the equivalent static wind loads considering the mean wind loads are proposed. Both the linear combination formula of SRSS for the equivalent static wind load and the weighting factor expressions of background and resonance equivalent static wind load are given. Third, the accuracy and validity of the formulas of equivalent static wind load are verified by a wind tunnel pressure test of a high‐rise building. Finally, the simplified combination coefficient formulas for the equivalent static wind loads are proposed, and the combination of the high‐rise building base's fluctuating equivalent static wind loads of along‐wind direction, across‐wind direction, and torsional direction is analyzed.

Method and application of equivalent static wind loads for multiple targets and wind directions

The Numerical Simulation for the Wind Fields and Wind Loads Around Spatial Structures

Multi-objective equivalent static wind loads for large-span structures

Equivalent Static Wind Load for Multiple Targets of China's National Stadium

MULIPLE TARGETS EQUIVALENT STATIC WIND LOADS OF RESONANT RESPONSE FOR LARGE-SPAN ROOFS

EQUIVALENT STATIC WIND LOAD FOR MULTIPLE TARGETS OF LARGE-SCALE SPACE TRUSS STRUCTURE

MULTIPLE TARGETS EQUIVALENT STATIC WIND LOAD FOR LONG-SPAN ROOFS

EQUIVALENT STATIC WIND LOADS FOR MULTIPLE TARGETS BASED ON WIND-INDUCED RESPONSE

Simplified Calculation of Equivalent Wind Loads of High Pier Continuous Rigid Frame Bridge in Double Cantilever State

Equivalent static wind loads on large span roof structures

Grouping Response Method for Equivalent Static Wind Loads Based on A Modified Lrc Method

Coupled wind-induced responses and equivalent static wind loads on long-span roof structures with the consistent load–response–correlation method

Equivalent static wind loads of multi-targets for long span plane roofs

Equivalent static wind load based on displacement mode and load combination for high‐rise buildings

Wind Tunnel Test and Equivalent Static Wind Loads on Large Span Station Buildings

Calculation for multi-target equivalent static wind loads of lang-span bridge based on displacement response

Universal Equivalent Static Wind Load Estimation for Spatial Structures Based on Wind-Induced Envelope Responses

Constrained Least-Squares Method for Computing Equivalent Static Wind Loads of Large-Span Roofs

Practical Method for Calculating Equivalent Wind Loads on Double Cantilever Bridges

AN APPROXIMATION METHOD FOR COMPUTING THE DYNAMIC RESPONSES AND EQUIVALENT STATIC WIND LOADS OF LARGE-SPAN ROOF STRUCTURES

Universal Equivalent Static Wind Loads of One Single-Layer Reticular Dome