Abstract:In order to offer higher average brightness and more stable photon beam, top-up injection mode is scheduled for daily operation in SSRF. Several critical beam parameters, such as filling pattern, average current, beam lifetime and transfer efficiency, need to be measured precisely and reliably, and few interlock logics need to be added into machine protection system with top-up mode. Several hardware and software optimizations of beam instrumentation for this purpose will be introduced in this paper. OVERVIEW Shanghai Synchrotron Radiation Facility (SSRF) is a third generation light source, which located at Shanghai, P.R. China. Since December 2012, SSRF has operated in top-up mode for user experiments, which was a milestone of SSRF in facility performance improvements. The topup injections are made continuously at the time interval of about 10 minutes. Each injection cycle takes about 10 seconds and the bunch change uniformity of the 500 bunch train is better than 95%. For the top-up operation, several beam parameters, such as filling pattern, average current, beam lifetime and transfer efficiency, need to be measured precisely. Some extra interlock logics were added into machine protection system. This paper will introduce the details of hardware and software optimizations of beam instrumentation for the purpose above. FILLING PATTERN Bunch charge uniformity control is very important for the top-up operation. The quality mainly depends on the precision of bunch charge & filling pattern measurement. This measurement can be realized by direct sampling BPM pickup signal [1-3] or synchrotron radiation signal [4]. Due to easy configuration and good linearity button, BPM pickups and PXI waveform digitizer based solution have been adopted [5].

Optimization Study Of The 1mev Rfq At Peking University

Study and Development of RFQ at Peking University

Beam optimization of RFQ and SFRFQ combined accelerator at Peking University

Beam Instrumentation System Optimization for Top-up Operation in SSRF

Progress of RFQ Accelerator Study at Peking University

Upgrading Of A Heavy Ion 1mev Isr Rfq Accelerator

R&D Status Of Sfrfq Accelerating System

Rf and beam tests of a 1 mev 26 mhz rfq at peking university

Beam Optimization of Helium Injector for Coupled RFQ–SFRFQ Linac

Upgrade of 1 mev heavy ion isr rfq accelerator

An Ecr Oxygen Source And A Lebt System Developed For 1mev Isr Rfq Accelerator Upgrade

Beam Experiments on the RFQ and SFRFQ Combined Accelerator System

BEAM DYNAMICS DESIGN AND ERROR STUDY OF THE 5mev RFQ

Investigation of High Duty Factor Isr Rfq-1000

THE STUDY OF SEPARATED FUNCTION RFQ (SFRFQ) WITH DIAPHRAGMS

Power Test of the Separated Function RFQ Accelerator

Studies on RFQ Accelerators and Its Applications

Design and Measurements of SFRFQ Cavity

Experimental Results Of An Ecr Oxygen Source And A Lebt System For 1mev Isr Rfq Accelerator Upgrade Project

Beam Dynamics Pre-Study For The Rfq Of Sppc P-Linac

Investigation of 26 MHz RFQ accelerators