Abstract:Magnetic field distribution in hybrid stepping motors has the following characteristics: 1) The field is three dimensional (3D), containing both axial and radial fields. 2) Local saturation occurs, leading to nonlinear properties. 3) The field nearby the air gap and teeth varies significantly. Due to these, a 3D finite element method (FEM) is needed to analyze the performance, and the mesh, especially those at the air gap and teeth layers, must be sufficiently dense, so as to improve the simulation accuracy. As a result, the meshing file is very large, consuming much computer memory and computation time. Therefore, the traditional 3D FEM simulation is somewhat inapplicable for the hybrid stepping motors. There are also analytical methods based on calculating the machine magnetic circuit, which are fast but suffer from low calculation accuracy, especially when severe saturation occurs. Therefore, a simplified analysis method with sufficient accuracy is preferable. In this paper, while taking a two phase hybrid stepping motor as an example, a model transformation-based analysis method is proposal, by which the original model of the hybrid stepping motor is approximate to a two-dimensional (2D) equivalent model. The static performance result is acquired from the equivalent model using 2D FEM simulation software. Then the properties of the original machine are solved through the post-processing of model counter-transformation. Feasibility and accuracy of the proposed method is verified by comparing the simulation and experimental results.

Simulation Model of the Electric Hammer Drill with the Magnetic Impact Conversion Mechanism

Analytical Modeling of Surface-Mounted PM Machines Accounting for Magnet Shaping and Varied Magnet Property Distribution

Research on Model Experiment for Electromagnet Drive Mechanism

Control Integrated Studies on High Speed Permanent Magnetic Generators System

Analytical Model of Electromagnetic Performance for Permanent-Magnet Vernier Machines Using Nonlinear Exact Conformal Model

Study on the Electric Hot and Vibration Composite Drilling

Transient Analysis and Verification of a Magnetic Gear Integrated Permanent Magnet Brushless Machine With Halbach Arrays

Modelling and simulation of tool passivation by magnetic elastic abrasive particles

A Model Transformation-Based Simulation and Analysis Method for Static Properties of Hybrid Stepping Motors

Modeling of Vibration Drive by Electromagnetic Field for Rotary Permanent Magnet

Hybrid Modeling Method for Thermal Analysis of Hairpin Winding Permanent Magnet Machine

Model and Experimental Study of Permanent Magnet Vibration-to-Electrical Power Generator

Modeling and Simulation for Direct-drive Permanent Magnet Wind Power System

Analytical Modeling of 3-D Magnetic Field and Performance in Magnetic Lead Screws Accounting for Magnetization Pattern

Performance Evaluation of the Wrench Models of Ironless Permanent Magnet Planar Motor with Different Simplifications

A Compacted Brushless Dual Mechanical Port Electrical Machine Model

Design and research of deep slot universal motor for electric power tools

Research On Modeling And Fault Analysis Of Permanent Magnet Operating Mechanism Of Vacuum Circuit Breaker

Static and Dynamic Analysis for Contactor with a New Type of Permanent Magnet Actuator.

Design optimization and feasibility analysis of pneumatic DTH Hammer with self-rotation bit

Modeling and Design of a Dual‐Stator Low‐Speed High‐Torque Permanent Magnet Drive Machine for the Ball Mill Application