Abstract:Porous carbons with high porosities were prepared from phenol–formaldehyde resins using chemical and physical activation methods. The resin precursor employed was synthesized with an initial formaldehyde-to-phenol ratio of 1.33 by mole. The chemical activation process consisted of KOH impregnation followed by carbonization in nitrogen at 500–900°C for 0–3 h, whereas the physical activation was performed by carbonizing the resins at 900°C followed by gasifying the char in CO2 to different degrees of burn-off. Both activation methods can produce carbons with surface areas and pore volumes greater than 2000 m2/g and 1.0 cm3/g, respectively. The influence of different parameters during chemical activation, such as carbonization temperature and time, KOH/resin ratio and heating rate, on the carbon yield and the surface characteristics was explored, and the optimum preparation conditions were determined. With physical activation the resulting carbons are mainly microporous and their porosity is an increasing function of the degree of burn-off. At similar porosity levels the carbon yield during physical activation was found to be lower than that with chemical activation. An SEM study showed that carbons produced from CO2 activation have a more compact surface than those produced from KOH activation.

INFLUENCES OF FERROCENE ON THE ACTIVATION CHARACTERISTICS AND PORE SIZE DISTRIBUTION OF PHENOLIC RESIN-BASED SPHERICAL ACTIVATED CARBON

EFFECT OF ADDING POLYETHYLENE GLYCOL ON THE STRUCTURE AND PROPERTIES OF PHENOLIC RESIN-BASED ACTIVATED CARBON SPHERES

Influence of Transition Metals on the Pore Structure and Adsorption Properties of Spherical Activated Carbon

Preparation of Phenolic Resin-based Spherical Activated Carbon and Adsorption of CO2

Preparation and Characterization of Porous Carbons Obtained from Mixtures of Furfuryl Alcohol and Phenol-Formaldehyde Resin

Preparation and Properties of Phenolic Resin-Based Activated Carbon Spheres with Controlled Pore Size Distribution

Modification of the activation characteristics of phenolic resin-based activated carbon spheres by polymer-blending method

THE STUDY OF PHENOLIC RESIN-BASED MESOPORE ACTIVATED CARBON WITH SUPERHIGH SPECIFIC SURFACE AREA

Preparation of Activated Carbon Microspheres from Phenolic Resin with Metal Compounds by Sub- and Supercritical Water Activation

Ferrocenecarboxaldehyde Modified Terephthalaldehyde-Phenolic Resin: A Comprehensive Study on the Synthesis, Curing Behavior, and Pyrolysis Process

Preparation and Electrochemical Properties of PF-based Activated Carbon

Porous carbon nanofibers with narrow pore size distribution from electrospun phenolic resins

Preparation of pitch-based spherical activated carbon with developed mesopore by the aid of ferrocene

Effects of ferrocene on flame temperature, formation of soot particles and growth of polycyclic aromatic hydrocarbons

Characteristics of activated carbon from sludge and peanut shell and its application for phenol adsorption

Ultrafine hierarchically porous carbon fibers and their adsorption performance for ethanol and acetone

Preparation of a porous carbon from ferrocene-loaded polyaniline and its use in hydrogen adsorption

Enhancement effect of potassium ferrate on self-activation: Significant improvement in pore structure and adsorption performance of activated carbon

Preparation of porous carbons from phenol–formaldehyde resins with chemical and physical activation

Effects of Preparation and Activation Manner on Surface Area of Hierarchical Porous Carbons Derived from Nut (euryale Ferox) Shell

A Comparative Study of Phenolic Resin-Based Activated Carbons by Means of Supercritical Water Activation and Steam Activation