Abstract:Electrospinning as a cost-effective process to synthesize nanofiber with controlled morphology and structure has regained attention in the last decade as result of rapid advancements in nanoscale science and engineering and their applications. Although there are a few works demonstrated the ability to fabricate nano gas sensor using electrospun nanofibers as sensing materials, there are limited works to show the optimization of the sensing performance by understanding the electron transport properties and their sensing mechanism. The overall objective of this work is to electrospun conducting polymer/insulating polymer composite nanofibers (i.e., (+)- camphor-10-sulfonic acid (HCSA) doped polyanline PANI (conductive) blended with PEO (non-conductive)) with different compositions (i.e., 12 to 68 wt.%) and apply them as chemiresistive sensing material to detect ammonia at room temperature. The diameter, defects, and morphology of nanofibers were adjusted by controlling solution composition, processing parameters and their effect toward the sensing performance were also investigated. Viscosity of electrospinning solutions was found to have a pronounced impact on fiber diameter and morphology of PANI/PEO nanofibers. Diameters around 350nm of different compositions of PANI/PEO nanofibers were achieved, where decreasing solution viscosity by increasing the PANI content resulted in a morphology changing from individual fibers to junctions. Although all the compositions of PANI/PEO nanofibers show semiconducting behavior and fit a three dimensional variable hopping range model, the activation energy and hopping distance increased as the PANI content decreased. The PANI/PEO nanofibers exhibited excellent sensitivity towards NH3 with fast response and recovery times where a low detection limit of 0.5 ppm with the sensitivity of 5.6 %/ppm of NH3 was achieved from 26 wt.% PANI/PEO nanofibers. Additionally, the PANI/PEO nanofibers response toward water vapor changed from positive to negative indicating the humidity independent ammonia gas sensor can be fabricated by controlling the composition of PANI/PEO nanofibers.

Recent Research Advances in Gas Sensitive Materials Based on Polyaniline and Its Composites

The Research and Application of Polyaniline/Multi-Walled Carbon Nanotubes Composite Sensitive Membrane for Ammonia Gas Detection

Preparation of CNTs/PANi core/shell-structured nanowires and improvement of sensitivity of chemical sensors

Gas Sensing Properties of A Composite Composed of Electrospun Poly(Methyl Methacrylate) Nanofibers and in Situ Polymerized Polyaniline

High Performance Gas Sensors Based on In-Situ Fabricated ZnO/polyaniline Nanocomposite: the Effect of Morphology on the Sensing Properties

The Development of Gas Sensitive Polymer and Polymer Composite

Highly Stable Polyaniline-Poly(sodium 4-Styrenesulfonate) Nanoparticles for Sensing of Amines.

Composites of Fe2O3 Nanosheets with Polyaniline: Preparation, Gas Sensing Properties and Sensing Mechanism

Water-soluble polyaniline and its composite with poly(vinyl alcohol) for humidity sensing

High-Performance Gas Sensor of Polyaniline/Carbon Nanotube Composites Promoted by Interface Engineering

Fabrication and design of a toxic gas sensor based on polyaniline/titanium dioxide nanocomposite film by layer-by-layer self-assembly

Gas Sensors Based on Conducting Polymers

Polyaniline as a Gas-Sensor Material

Broad-class volatile organic compounds (VOCs) detection via polyaniline/zinc oxide (PANI/ZnO) composite materials as gas sensor application

Comparison of gas sensing performances in various yarn types coated with polyaniline

Advances in gas-sensitive materials based on polyurethane film, foam, and fiber

A review of recent developments in tin dioxide composites for gas sensing application

Research Development of Organic-Inorganic Gas Sensitive Nanocomposite

Versatile Gas Sensing at Room Temperature: Facile Fabrication of a PANI-PB-ZnO Hybrid Nanocomposite for Detecting Ammonia, Acetone, and Ethanol

Electrospun Polyaniline/Poly(ethylene oxide) Composite Nanofibers Based Gas Sensor

Optimizing Ammonia Detection with a Polyaniline−Magnesia Nano Composite