Abstract:The heat transfer of supercritical pseudo-boiling has been preliminarily studied, but the definition of gas-liquid interface is still not uniform. The fluid-structure coupling numerical simulation of heat transfer characteristics in supercritical CO 2 pool was carried out using laminar flow model, Platinum wire is the heating element, d =70 μm, the q w range is 0~2000 kW/m 2 , the P range is 8~10 MPa, multi-scale mesh is used to model the heating wire, simulated values agree well with the experimental data. The results show that the natural convection zone is characterized by an increase in h with q w due to an increase in the circumferential average Rayleigh number Ra ave of the heating filament with q w . The temperatures of the four characteristic working conditions in the evaporation-like zone of the class show a decreasing trend along the r direction. Analogy with subcritical heat transfer, by calculating the thermal conductivity ratio Q con / Q t , the supercritical is divided into three regions, T < T L is liquid-like region (LL), T L < T < T M is two-phase-like region (TPL), T > T M is vapor-like region (VL), the rule is the same as that of x partition with supercritical pseudo-boiling dryness; According to the curves of average thermal conductivity λ ave and thermal resistance R G with heat flux q w determined by calculating thermal conductivity ratio, the variation law of heat transfer coefficient h with q w in evaporation-like region can be well explained, as q w increases, the thermal conductivity thermal resistance R G increases, and the heat from the heating filament is difficult to be transferred to the fluid outside the vapor-like membrane, leading to a decrease in the heat transfer coefficient h when q A < q w < q C , and a significant increase in λ ave when q w > q C , and the recovery of heat transfer when h rises again.In this paper, a new method for determining the gas-liquid interface of supercritical pool heat transfer is proposed, which explains the heat transfer mechanism of evaporation-like zone well, and provides a theoretical basis for the development of supercritical pool heat transfer in the future.

Analysis on the value of coefficient of mass transfer with phase change in Lee′s equation

Performance Analysis on Open Thermochemical Sorption Heat Storage from a Real Mass Transfer Perspective

Numerical Investigation of Heat Transfer Characteristics in a Shell- And-Tube Latent Heat Thermal Energy Storage System

An Explicit Expression of the Empirical Factor in a Widely Used Phase Change Model

Determination of Mass Transfer Coefficient for Condensation Simulation

Theoretical and Experimental Analyses of Two-Phase Flow Condensation Heat Transfer Inside the Horizontal Micro-Fin Tube

Study on accurate solution for thermal transfer problem of phase-change plate

Interfacial Analysis and Development of Phase Change Models for Condensation in Openfoam

Numerical investigation of the thermal performance of a loop thermosyphon considering dynamic condensation mass transfer time relaxation parameter

Evaluation of several liquid–vapor phase change models for numerical simulation of subcooled flow boiling

Interfacial Analysis and Development of Condensation Models with OpenFOAM

Numerical simulation of fluid-structure coupled heat transfer characteristics of supercritical CO 2 pool heat transfer*

A New Numerical Method To Solve Convective/Diffusive Phase Change Heat Transfer Problems

A SIMPLE MODEL FOR HEAT TRANSFER ANALYSIS OF SHELL-AND-TUBE WITH PHASE CHANGE MATERIAL AND ITS PERFORMANCE SIMULATION

RESEARCH ON EFFECTIVE THERMAL CONDUCTIVITY OF ENERGY STORAGE SYSTEM WITH SOLID-LIQUID PHASE CHANGE BY NUMERICAL ANALYSIS AND EXPERIMENTS

Research on Mass Transfer Coefficient Measurement Model of External-Loop Airlift Reactor

THE MATH MODEL OF ENERGY STORAGE SYSTEM WITH SOLID- LIQUID PHASE CHANGE AND THE RESEARCH ON NATURAL CONVECTION COEFFICIENT OF HEAT TRANSFER BY EXPERIMENTS

The lattice Boltzmann model for the heat and mass transfer of latent functional thermal fluid using enthalpy-transforming method

Numerical Investigation of Different Heat Transfer Behaviors of Supercritical CO2 in a Large Vertical Tube

Assessing the effects of fluids flow on heat transfer performance in direct contact heat transfer process through EMD-LSSVM model: An experimental study

Comparison of LBM and FVM for Simulation of Solid-Liquid Phase Change Problem with Natural Convection