Abstract:In the existing fragility assessment, most bridges are short-span bridges and a few bridges have long spans such as cable-stayed bridges. In this study, a procedure is proposed to conduct the component and system seismic fragility analysis of long-span cable-stayed bridges. Three critical issues are addressed in the procedure: (1) the optimal intensity measure of cable-stayed bridges, (2) limit state models of various components, and (3) contribution of individual components to the entire system failure of bridges. This study chooses a long-span cable-stayed bridge with the most common configuration in China and builds the numerical model of its multiple components using OpenSEES that can account for their nonlinear response and uncertainties in the ground motion and material properties. Four typical intensity measures are compared with respect to four characteristic properties including efficiency, practicality, sufficiency, and proficiency. Peak ground velocity turns out to be the optimal intensity measure. Limit states of pylon sections are derived by a numerical simulation based on pushover analysis and China’s guidelines. The pushover results indicate that the limit state of their section curvature depends highly on the section type and axial compression coefficient. A joint probabilistic seismic demand model and Monte Carlo simulation are employed to obtain an accurate system fragility estimate of cable-stayed bridges by accounting for the contribution of each component to the overall bridge system. The system fragility curves based on Monte Carlo simulation lie much closer to the upper bound fragilities given small correlation coefficients, implying that seismic demands of various components conditioned on the peak ground velocity are not correlated.

Dynamic Reliability Analysis of Long-span Cable-stayed Bridges under Stochastic Earthquake

EFFECTS OF LOCAL CABLE VIBRATION ON THE SEISMIC RESPONSE OF CABLE-STAYED BRIDGES

Stochastic seismic responses analysis of long-span rigid-framed bridge with high piers considering travelling wave effect

Dynamic characteristics and seismic response analysis of cable-stayed bridges taking into account cable lateral vibration

Dynamic Responses of Cable-Stayed Bridges to Vehicular Loading Including the Effects of the Local Vibration of Cables

SEISMIC RESPONSE ANALYSIS OF CABLE-STAYED BRIDGES USING CARBON FIBER COMPOSITE CABLE

Fragility analysis and assessment of large-span beam string-structures

NONLINEAR VIBRATION OF STEEL AND CFRP CABLES OF LONG SPAN CABLE-STAYED BRIDGE UNDER VEHICULAR LOADS

Stochastic Seismic Response Analysis of Long-span Continuous Rigid Frame Bridge

Dynamic Characteristics and Multi-support Seismic Response Analysis of a Super-large-span Suspension Bridge

Probability Model and Reliability Analysis of Cable Stress for Cable-Stayed Bridge

SEISMIC VULNERABILITY ANALYSIS FOR LONG-SPAN CABLE-STAYED BRIDGE

Reliability Analysis of a Cable-Stayed Bridge: A Comparative Study Across Varied Support Scenarios and Incorporating Soil–Pile–Structure Interaction

System-based probabilistic evaluation of longitudinal seismic control for a cable-stayed bridge with three super-tall towers

Vibration-Induced Probabilistic Fatigue Life Assessment of A Suspension Bridge Carrying Both Railway and Highway Traffic

Fatigue Reliability Analysis of a Suspension Bridge Using Long-Term Monitoring Data

Seismic fragility assessment of long-span cable-stayed bridges in China

Extreme value distribution and dynamic reliability estimation of high-pier bridges subjected to near-fault impulsive ground motions

Risk assessment for a long-span cable-stayed bridge subjected to multiple support excitations

Performance-Based Seismic Fragility and Residual Seismic Resistance Study of a Long-Span Suspension Bridge

Reliability Assessment for the Balanced Cantilever Construction Phases of Super Long-Span Cable-Stayed Bridges with Steel Box Girder