Abstract:Many hydraulic tools, like hydraulic cylinders and hydraulic artificial muscle joints are operated by adjusting pressure differences between different zones. Typically, the method employed to change the pressure difference is establishing hydraulic bridges and adjusting liquid resistance. While effective, this method's drawback is complex structures. To address this issue, a water-hydraulic pressure difference control valve, integrating two hydraulic bridges, was designed. The static performances including the output pressure difference, the flow rate and the force acting on the valve core were analyzed using AMESim and computational fluid dynamics simulations. Based on the simulation results, a prototype of voice coil motor direct drive pressure difference control valve was manufactured and the corresponding experiments were carried out. The computational fluid dynamics simulation results show that the internal leakage and the through-flow capacity difference between throttling grooves affect the flow field characteristics of the valve. When the pump pressure is 3 MPa and the valve opening is at the middle position, the internal leakage increases the flow rate from 2.25 L/min to 2.38 L/min, and the through-flow capacity difference reduces the control port pressure from the theoretical analysis of 1.5 MPa to 1.41 MPa. Furthermore, combined with the analysis of the external liquid resistance, the AMESim model of the pressure difference control valve is modified. When the pump pressure is 3 MPa, the pressure difference and flow rate average deviations between the modified AMESim model and the experiment are 0.021 MPa and 0.048 L /min. Finally, a rotational angle experiment for a water hydraulic artificial muscle joints showed satisfactory control effects, suggesting the valve's application in controlling hydraulic tools and actuators.

A Squeeze Damping Film Analysis of Solenoid Valve for Electronic Control Unit Pump Fuel Injection System

The Design of High-Speed Powerful Solenoid Based on Giant Magnetostrictive Material and Analysis of Its Control Method

Modeling of Solenoid-Actuated Valve System

Research and Development of A Test System for the Dynamic Performance Testing of Pneumatic Solenoid Valves

Optimal Design and Test of High-speed Electro-pneumatic Ejector Valve

Modeling and characteristics investigation on a new pneumatic proportional pressure valve

Design and Simulation of a High Pressure Proportional Pneumatic Pressure Reducing Valve

Control characteristic of PWM solenoid valve in the electro-hydraulic shift system

CFD Simulation of Dynamic Characteristics of a Solenoid Valve for Exhaust Gas Turbocharger System

Research on Adaptive Damper Based on Cone-Slide Valve Combination Regulation Principle

Dynamic SimuIation AnaIysis of High-pressure Pneumatic PiIot SoIenoid VaIve

A Vibration-Based Measurement Method for Dynamic Characteristic of Solenoid Switching Valve

Experimental and Numerical Investigation of Flow Forces in a Seat Valve Using a Damping Sleeve with Orifices

Modeling and testing for continuously adjustable damping shock absorber equipped with proportional solenoid valve

Modeling and Parameter Sensitivity Analysis of Valve-controlled Helical Hydraulic Rotary Actuator System

Fast Dynamics and Low Power Losses of High-Speed Solenoid Valve Based on Optimized Pre-Excitation Control Algorithm

Research on Damping Contribution Rate of Key Parameters of Valve-Controlled Damping Adjustable Damper

Dynamic Response Characteristics of High-Speed, Powerful Solenoid Valve

Investigation into the Effects of the Variable Displacement Mechanism on Swash Plate Oscillation in High-Speed Piston Pumps

Simulation and experimental verification of solenoid valve characteristics for semi-active dampers

Simulation Analysis and Experimental Research on Static Performance of Water-hydraulic Pressure Difference Control Valve