Abstract:BACKGROUND:At present,there are several research methods of femoral three-dimensional(3-D) finite element modeling,but studies on the 3-D finite element solid model of femur by volume rendering method are few.OBJECTIVE:To establish the 3-D finite element solid model of human femur by volume rendering method,to obtain the stress distribution of the model through simulation of mechanical loading,and to assess the feasibility of this method by comparing with the previous femoral biomechanical experiments.METHODS:CT images was preprocessed by images denoising and other methods,then the 3-D finite element solid model of human femur was constructed by using Mimics and Ansys softwares through adopting rendering technique.And,the loading conditions of femur at the position of standing were simulated by importing the femur material parameter to the Mimics software.RESULTS AND CONCLUSION:The 3-D finite element solid model of human femur includes cortical bone,cancellous bone and anatomical structure of cavity,and there were 63 900 nodes and 43 552 elements generated in total after meshing.Results of simulation of the loading conditions showed that the femur compressive stress primarily concentrated in the inner side of femur,especially in the calcar femorale,and the tensile stress mainly concentrated in the outside of collum femoris and shaft of femur.The 3-D finite element solid model of human femur with high quality simulation and reflection of the anatomical structure of femur can be created by volume rendering method.So,this model can be applied to study the internal structure and details of femur,and simulate the biomechanical property of femur.

3D NURBS Reconstruction and Finite Element Analysis of the Femur Model

Automatical Reconstruction of Deficient Cad Model

Study on 3d Reconstruction and Static/Dynamic Characteristics of Human Femur

A Review of 3-D Geometric Model Reconstruction Methods in Reverse Engineering

A new method to reconstruct the spatial structure of human proximal femur and establishment of the finite element model]

The Three-Dimensional Modeling of Femur.

Heterogeneous Modelling and Finite Element Analysis of the Femur

Study on Simulation Modeling Method of the Reconstruction Following Resection of Peri-Acetabular Tumors

[Valid Constructing Method of Three-Dimensional Finite Element Human Foot Model and Experimental Analysis on Its Rationality].

Stress analysis and establishment of three-dimensional finite element model of human femur by volume rendering

3D Reconstruction and Deformation of Femur Model

Characters and modeling procedure of femoral neck 3D in orthopedic biomechanics

Establishing the 3-D Finite Element Solid Model of Femurs in Partial by Volume Rendering.

3D Reconstruction of Digital Female Pelvic Model Based on NURBS Surface

Construction of the Three-Dimensional Finite Element Model of Normal Human Foot Structure

FINITE ELEMENT APPLICATION IN HUMAN CERVICAL SPINE MODELING

Development of Three- Dimensional Finite Element Model of Cervical Spine Form C3～ C7 by Means of Computed Tomography Images and Compute Aided Design

Three-dimensional Finite Element Modeling Method of Femurs Based on CT Data

Finite element analysis of biomechanics of intact femur in normal human standing model

CT Based Three Dimensional Geometric Model of Cervical Spine

Construction of three-dimension model for artificial bone and its biomechanical features