Abstract:The analytical solution is derived for the plane strain stress field around a cylindrical void in a hexagonal close-packed single crystal with three in-plane slip systems oriented at the angle π/3 with respect to one another. The critical resolved shear stress on each slip system is assumed to be equal. The crystal is loaded by both internal pressure and a far-field equibiaxial compressive stress. The deformation field takes the form of angular sectors, called slip sectors, within which only one slip system is active; the boundaries between different sectors are radial lines. The stress fields are derived by enforcing equilibrium and a rigid, ideally plastic constitutive relationship, in the spirit of anisotropic slip line theory. The results show that each slip sector is divided into smaller regions denoted as stress sectors and the stress state valid within each stress sector is derived. It is shown that stresses are unique and are continuous within stress sectors and across stress sector boundaries, but the gradient of stresses is not continuous across the boundaries between stress sectors. The solution shows self-similarity in that the stresses over the entire domain can be determined from the stresses within a small region adjacent to the void by invoking certain scaling and symmetry properties. In addition, the stress state exhibits periodicity along logarithmic spirals which emanate from the void. The results predict that the mean value of in-plane pressure required to activate plastic deformation around a void in a single crystal can be higher than that necessary for a void in an isotropic material and is sensitive to the orientation of the slip systems relative to the void.

Contact Problem in Octagonal Two-dimensional Quasicrystalline Material

Steady State Thermoelastic Contact Problem of One-Dimensional Hexagonal Quasicrystals

The Thermoelastic Contact Problem of One-Dimensional Hexagonal Quasicrystal Layer with Interfacial Imperfections

Analytical solutions for some defect problems in 1D hexagonal and 2D octagonal quasicrystals

A Closed-Form Solution to the Mechanism of Interface Crack Formation with One Contact Area in Decagonal Quasicrystal Bi-Materials

Frictional Contact of One-Dimensional Hexagonal Quasicrystal Coating Considering Thermal Effects

Three Dimensional Thermally Frictional Adhesive Contact Problem of Quasicrystals Materials

Cylindrical void in a rigid-ideally plastic single crystal III: Hexagonal close-packed crystal

Frictional Contact Problem of a Rigid Charged Indenter on Two Dimensional Hexagonal Piezoelectric Quasicrystals Coating

Effect of T-stress on the fracture in an infinite two-dimensional decagonal quasicrystals of a cruciform crack with unequal arms

Axisymmetric Hertzian Contact Problem Accounting for Surface Tension and Strain Gradient Elasticity

Interaction Between A Semi-Infinite Crack and A Straight Dislocation in A Decagonal Quasicrystal

High Strain Gradient Plasticity Associated with Wedge Indentation into Face-Centered Cubic Single Crystals: Geometrically Necessary Dislocation Densities

Symplectic method for bending and vibration problems of one-dimensional hexagonal quasicrystal plates

Contact of Transversely Isotropic Materials Containing Inhomogeneities

Stress singularity of one-dimensional hexagonal piezoelectric quasicrystal composites due to thermal effect

Indentation on Two-Dimensional Hexagonal Quasicrystals

Analysis Solution Method for 3D Planar Crack Problems of Two-Dimensional Hexagonal Quasicrystals with Thermal Effects

Two-dimensional Hertzian contact problem with surface tension

Multi-field coupling solutions of functionally graded two-dimensional piezoelectric quasicrystal wedges and spaces

Analytical Expressions of the Elastic Displacement Fields Induced by Straight Dislocations in Decagonal, Octagonal and Dodecagonal Quasicrystals