Abstract:As wind turbines become larger and move into deeper sea, their operating environment worsen. The torque fluctuation inside the drive chain is aggravated, which leads to the premature failure of the wind turbines. To improve the transmission stability of wind turbines, the mechanical-hydraulic hybrid transmission system (MHHTS) has been applied. However, existing research has issues with structure and hydraulic control. An MHHTS structure was proposed to meet the requirements of structural simplicity and high efficiency, corresponding to the design principles summarized in the article. Based on this structure, we have selected a hydraulic control mode, the constant displacement pump variable displacement motor (CPVM), that satisfies the reasonable utilization of displacement and the stability of control. This mode was chosen by comparing the displacement and pressure variation rules of three hydraulic control modes that meet the maximum power point tracking (MPPT) control principle of the wind turbine. In this study a co-simulation model of a 10 MW MHHTS wind turbine was built using Simulink and AMEsim. The correctness of the structural and control mode ware verified by co-simulation with a uniformly varying wind. Moreover, a method that can suppress fluctuations in output power by controlling the motor displacement was proposed. Different-step winds response analyses were conducted to explore the relationship between the displacement response speed and the output power fluctuations. The non-linear relationship between the displacement and the wind speed can also have an impact on the previous relationship. Finally, the feasibility of the control method was verified through simulation of an actual turbulent wind. These achievements should guarantee the future application of the novel transmission system in wind turbines.

Research on Multi-flow Hydraulic Synchronous Motors

Several key technologies of hydraulic system with high flow and high performance

Motion synchronization control of four multi-stage cylinders electro-hydraulic elevating system

Synchronization Coordinated Control of the Hydraulic Cylinder of the Thrust System on Shield Machines

Research on Two Key Technologies of Improving Dynamic Quality of Hydraulic System with High Flow

Control method of multi-motor's speed synchronization control in dynamometer test bench for multi-axles'vehicle

Harmonic and Synchronous Compound Control of a Dual-Valve Controlled Single-Rod Electro-Hydraulic Actuator.

Hydraulic Systems Control Based on the Characteristics of Major-Motion Mechanism for an Open-Die Forging Manipulator

Comparison of synchronization control techniques for traction motors of high-speed trains

Review of Research and Development of Hydraulic Synchronous Control System

Development and Research Overview on Variable Frequency Hydraulic Technology

Design and Control of the Mechanical-Hydraulic Hybrid Transmission System in Wind Turbines

Design of Hydraulic Transmission Systems for Tidal Current Turbines and Its Simulation Validation

Two-cylinder synchronous electro-hydraulic servo system and its control technology development

Recent Development and Prospect of Multi-Degree-of-freedom Ultrasonic Motors

Motion Control of Multi-Actuator Hydraulic Systems for Mobile Machineries: Recent Advancements and Future Trends

Modeling and Implementation of Hydraulic Motor with Digital Distribution and Speed Adjusting Mechanism

Capability Analysis and Optimization Design of Variable Hydraulic Motor Used in Automobile Crane

Design of a New Energy-saving Hydraulic Pumping Unit with Variable Speed Control and Closed Oil Circuits

Synchronization Control Strategy of Multi-Motor System Based on Profibus Network

The research on synchronized control method of hydraulic strand jacks for large tonnage topside lifting system