Abstract:For gas metal arc welding, the effect of CO2 mixture in a shielding gas on a metal transfer process was investigated through the observation of the plasma characteristics and dynamic behaviour at the droplet’s growth-separation-transfer by the temperature measurement methods which were suitable, respectively, to the argon plasma region and the metal plasma region. At the present experimental conditions, the metal transfer process was a spray transfer type with 100%Ar shielding gas. On the other hand, with 85%Ar + 15%CO2 shielding gas, the metal transfer process was a globular transfer type in which the arc length was shorter, the width was narrower and the time interval of the droplet separation was longer. For both shielding gases, the metal plasma region near the arc central axis exhibited 6500–7500 K, which was lower than the argon plasma region. With 85%Ar + 15%CO2 shielding gas, when the metal droplet grew below the electrode wire, the region below the droplet has a high plasma temperature and a high concentration of iron vapour which surrounded the droplet. The region also exhibited a remarkably high electron number density. At the spray transfer process, the argon plasma region had an electron number density twice as high as the metal plasma region. Meanwhile, at the globular transfer process, the metal plasma region had a higher electron number density than the argon plasma region, which corresponded to a higher electrical conductivity near the arc axis. This means that the electric current goes through the arc axis easier than the spray transfer process. This condition increases the temperature below the droplet. The thermal expansion increases the force preventing the droplet from falling down. In consequence, the metal transfer takes the globular transfer type.

Plasma-gas Metal Arc Welding Procedure on Low Carbon Steel

Surface Treatment of 0cr19ni9 Stainless Steel SMAW Joint by Plasma Melting

The study on plasma-Mig hybrid arc behaviour and droplet transfer for mild steel welding

The Corrosion Resistance of 0cr19ni9 Stainless Steel Arc Welding Joints with and Without Arc Surface Melting

Analysis on Arc Characteristics of Plasma-Mig Hybrid Arc Welding

Droplet transition for plasma-MIG welding on aluminium alloys

Research on water-air plasma cutting process of carbon steel

Analysis of dynamic plasma behaviors in gas metal arc welding by imaging spectroscopy

Effect of Arc Surface Remelting on the Corrosion Resistance of 0cr19ni9 TIG Welding Joint

Study on droplet transfer mechanical behavior in laser-MIG hybrid welding process

Analysis of dynamic plasma behaviours in gas metal arc welding by imaging spectroscopy

Interface Behavior of Copper and Steel by Plasma-Mig Hybrid Arc Welding

Study of metal transfer in CO2 laser+GMAW-P hybrid welding using argon-helium mixtures

Behavior of the Plasma Characteristic and Droplet Transfer in CO2 Laser–gmaw-P Hybrid Welding

Technology characteristics of stainless steel plasma arc-gas tungsten arc double-sided arc welding process

Influence of Distance Between Laser and MIG Arc on Drop Transfer Process of CO_2 Laser-Mig Hybrid Welding

The Arc Physical Characteristics and Molten Pool Dynamic Behaviors in Conduction Plasma Arc Welding

Metal Transfer and Arc Plasma in Gas Metal Arc Welding

Study on Coupling Mechanism and Metal Transfer in Laser Double-Wire MIG Arc Hybrid Welding

Influence Mechanism of Metal Vapor in Plasma Arc Lap Welding

Study on Droplet Transfer of Pulsed MIG Welding and Current Waveform Control