Abstract:Introduction: During the COVID-19 pandemic, ventilator shortages necessitated the development of new, low-cost ventilator designs. The fundamental requirements of a ventilator include precise gas delivery, rapid adjustments, durability, and user-friendliness, often achieved through solenoid valves. However, few solenoid-valve assisted low-cost ventilator (LCV) designs have been published, and gas exchange evaluation during LCV testing is lacking. This study describes the development and performance evaluation of a solenoid-valve assisted low-cost ventilator (SV-LCV) in vitro and in vivo, focusing on gas exchange and respiratory mechanics. Methods: The SV-LCV, a fully open ventilator device, was developed with comprehensive hardware and design documentation, utilizing solenoid valves for gas delivery regulation. Lung simulator testing calibrated tidal volumes at specified inspiratory and expiratory times, followed by in vivo testing in a porcine model to compare SV-LCV performance with a conventional ventilator. Results: The SV-LCV closely matched the control ventilator's respiratory profile and gas exchange across all test cycles. Lung simulator testing revealed direct effects of compliance and resistance changes on peak pressures and tidal volumes, with no significant changes in respiratory rate. In vivo testing demonstrated comparable gas exchange parameters between SV-LCV and conventional ventilator across all cycles. Specifically, in cycle 1, the SV-LCV showed arterial blood gas (ABG) results of pH 7.54, PCO2 34.5 mmHg, and PO2 91.7 mmHg, compared to the control ventilator's ABG of pH 7.53, PCO2 37.1 mmHg, and PO2 134 mmHg. Cycle 2 exhibited ABG results of pH 7.53, PCO2 33.6 mmHg, and PO2 84.3 mmHg for SV-LCV, and pH 7.5, PCO2 34.2 mmHg, and PO2 93.5 mmHg for the control ventilator. Similarly, cycle 3 showed ABG results of pH 7.53, PCO2 32.1 mmHg, and PO2 127 mmHg for SV-LCV, and pH 7.5, PCO2 35.5 mmHg, and PO2 91.3 mmHg for the control ventilator. Conclusion: The SV-LCV provides similar gas exchange and respiratory mechanic profiles compared to a conventional ventilator. With a streamlined design and performance akin to commercially available ventilators, the SV-LCV presents a viable, readily available, and reliable short-term solution for overcoming ventilator supply shortages during crises.

Design of Ventilator Test System Based on Active Servo Lung

Control and Movement Portions of Active Servo Lung Simulation Research

Extra-high Pressure Pneumatic Test Bed Based on Virtual Instruments

Research and Development of A Test System for the Dynamic Performance Testing of Pneumatic Solenoid Valves

Soft Hybrid Actuated Hierarchical Bronchoscope Robot for Deep Lung Examination

Development and performance evaluation of a solenoid valve assisted low-cost ventilator on gas exchange and respiratory mechanics in a porcine model

An active one-lobe pulmonary simulator with compliance control for medical training in neonatal mechanical ventilation

Development of a non-invasive ventilator for emergency and beyond

Mechanical ventilation strategy for pulmonary rehabilitation based on patient-ventilator interaction

A Multivent System for Non-Invasive Ventilation: Solving the Problem of Ventilator Shortage During the COVID-19 Pandemic

Design and Performance Evaluation of a Low-Cost Non-Invasive Electromechanical Ventilator With Feedback Mechanism

Extracorporeal Closed-Loop Respiratory Regulation for Patients with Respiratory Difficulty Using a Soft Bionic Robot

Physiological hardware-in-the-loop test bench for mechanical ventilation

Volume Control of Low-Cost Ventilator with Automatic Set-Point Adaptation

Comparing physiological impacts of positive pressure ventilation versus self-breathing via a versatile cardiopulmonary model incorporating a novel alveoli opening mechanism

Robust, maintainable, emergency invasive mechanical ventilator

Design and simulation of AI-based low-cost mechanical ventilator: An approach

Design of Multiple Closed-Loop Control Portable Ventilator

Development and evaluation of a mechanical ventilator-sharing system

Low-cost, easy-to-build noninvasive pressure support ventilator for under-resourced regions: open source hardware description, performance and feasibility testing