Abstract:In the present work, multiwalled carbon nanotubes functionalized with L-tyrosine (CNT-TYR) was used as a nanoadsorbent to remove a toxic dye, methylene blue (MB). To understand the adsorption behaviour of the MB dye on the nanoadsorbent, the adsorption mechanism, kinetics and isotherm were studied in detail. The factors that influence the adsorption process such as stirring speed (200-800 rpm), contact time (0-150 min), amount of nanoadsorbent (5-25 mg), pH (2-10), temperature (25-65 °C), and initial dye concentration (10-300 mg L-1) were optimized. It was observed that >95% adsorption occurred at pH 6, 25 ◦C temperature, and 7 min of contact time. The maximum adsorption capacity attained at the optimum conditions was 440 mg g-1, which is higher in comparison to other reported nanoadsorbents. The kinetics study was done using pseudo first order, pseudo second order, intraparticle diffusion, and fractional power model, and the results indicated that the pseudo second order model was followed for the adsorption of MB dye on CNT-TYR. The study of adsorption isotherms was conducted for the Langmuir, Freundlich, Temkin, Elovich, and Redlich-Peterson models, and the results revealed that the Langmuir model was better fitted to the obtained data (R2>0.99) than the other models, which indicated monolayer adsorption via chemisorption. The reason for the high adsorption capacity of CNT-TYR was explained by the different types of interactions such as electrostatic, π-π interaction, and H-bonding, which explain the adsorption mechanism and were further confirmed by the FTIR spectrum of MB saturated nanoadsorbent. The result indicates that CNT-TYR has high efficiency in the removal of dyes and various other toxic contaminants present in water.

Adsorption of methylene blue on the modified as-prepared carbon nanotubes

Wrapping Carbon Nanotubes with Poly (sodium 4-Styrenesulfonate) for Enhanced Adsorption of Methylene Blue and Its Mechanism

Adsorption of Methylene Blue from Aqueous Solution Using Gelatin-Based Carboxylic Acid-Functionalized Carbon Nanotubes@Metal–Organic Framework Composite Beads

Enhanced Adsorptive Removal of Methyl Orange and Methylene Blue from Aqueous Solution by Alkali-Activated Multiwalled Carbon Nanotubes

Adsorption of Methylene Blue by Halloysite/MnFe2O4 Nanocomposites

Adsorption Behaviour of Methylene Blue on Carbon Nanoparticles

Enhanced Adsorption of Methylene Blue Dye on Functionalized Multi-Walled Carbon Nanotubes

Adsorption behavior of methylene blue on halloysite nanotubes

Adsorption Behavior of Ferromagnetic Carbon Nanotubes for Methyl Orange from Aqueous Solution.

Adsorption of Methylene Blue in Water onto Activated Carbon by Surfactant Modification

Artificial intelligence models for methylene blue removal using functionalized carbon nanotubes

Highly efficient and rapid removal of a toxic dye: Adsorption kinetics, isotherm, and mechanism studies on functionalized multiwalled carbon nanotubes

Enhanced methylene blue adsorption using single-walled carbon nanotubes/chitosan-graft-gelatin nanocomposite hydrogels

Removal of methylene blue from coloured effluents by adsorption onto SBA-15

Adsorption Behaviors of Cationic Methylene Blue and Anionic Reactive Blue 19 Dyes onto Nano-Carbon Adsorbent Carbonized from Small Precursors

Adsorption behavior of methylene blue onto titanate nanotubes

Adsorption of Sulfonamides by Magnetic Multiwall Carbon Nanotubes

Chitosan‐nTiO2 Nanocomposite Synthesis and its Adsorptive Removal Capacity for Methylene Blue from its Aqueous Solution: Batch Adsorption Study and Modeling

Highly Effective Adsorption of Cationic and Anionic Dyes on Magnetic Fe/Ni Nanoparticles Doped Bimodal Mesoporous Carbon.

Preparation and characterization of MWCNT–COOH–cellulose–MgO NP nanocomposite as adsorbent for removal of methylene blue from aqueous solutions: isotherm, thermodynamic and kinetic studies

The preparation of core–shell Fe3O4@SiO2 magnetic nanoparticles with different surface carboxyl densities and their application in the removal of methylene blue