Abstract:This study proposes a clustered dynamic adaptive chemistry (CDAC) method, which uses an iterative K-means algorithm to partition the computational cells into different groups according to their similarity in terms of the temperature and significant species compositions. Taking advantage of the clustered cells, the averaged thermo-chemical properties of the cells in the respective clusters are then used to identify the adaptive dynamic reduced chemistry through the method of direct relation graph with error propagation (DRGEP). Moreover, the integration of the chemical source term, which commonly dominates the computational effort in reactive flow simulations, is now performed using the dynamic adaptive reduced chemistry at the cluster level instead of the cell level. With this CDAC method, the on-the-fly DRGEP process as well as the chemistry integration only needs to be conducted at the cluster level, dramatically reducing the unnecessary repeated computation for similar computational cells. In addition, the adaptive dynamic reduced chemistry further accelerates the chemistry integration process due to less ordinary differential equations (ODEs) to be solved for each cluster. This newly proposed CDAC method was tested in multi-dimensional homogeneous charged compression ignition engine (HCCI), direct injection compression ignition (DICI) engine and constant volume chamber combustion (CVCC) fueled with diesel, biodiesel and kerosene through the use of their respective surrogate fuel mechanisms under different operating conditions. The performance of CDAC in terms of accuracy and efficiency were extensively analyzed and discussed using different user-defined parameters, mechanisms with different surrogate components and number of species as well as different meshes with different number of grid cells. Based on this analysis, the error tolerances in DRGEP and the error tolerances of the temperature and significant species' mass fraction are recommended as: epsilon(d) <= 0.001, epsilon(T) 20K and epsilon(Y) <= 0.01 to achieve less than 0.1% integral error. With these recommended user-defined tolerances, it can be observed that the current CDAC method is able to accurately predict the in-cylinder pressure as well as the species profile in HCCI, DICI and the flame lift-off length in CVCC when compared with the full chemistry calculations as well as the experimental results. Moreover, with the recommended user defined error tolerances and a chemical kinetic model of 112 species, this CDAC method is capable of achieving a computational time speed-up factor of more than 3 compared to the conventional DAC and of almost 5 compared to the full chemistry. Finally, the CDAC method coupled CFD was applied to simulate a diesel DICI engine under three different engine speeds with a detailed primary reference fuel (PRF) mechanism of more than 1000 species. The 3-D simulation could be finished in acceptable CPU time while being able to well capture the experimental in-cylinder pressure and heat release rate for all the three engine speeds. (C) 2018 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Computational fluid dynamics in chemical engineering

Progress on agitated apparatus for polymer devolatilization and its CFD simulation

Research Progress in Numerical Models on Gas-Solid Fluidization of Cohesive Particles

Computational fluid dynamics applied to membrane processes for water treatment

The transformative role of Computational Fluid Dynamics (CFD) in chemical engineering

Computational Fluid Dynamics–Discrete Phase Method Simulations in Process Engineering: A Review of Recent Progress

Computational Fluid Dynamics Iteration Driven by Data

A perspective on the past, the present, and the future of computational fluid dynamics (CFD) in flow chemistry

Discrete element method and its applications in fluidization

Basics of computational fluid dynamics: An overview

Multiscale Eulerian CFD of Chemical Processes: A Review

Applications of computational fluid dynamics (cfd) in the food industry: a review

An Improved Computational Fluid Dynamics-Discrete Bubble Model for Multiphase Bubble Flow Simulation with a Wide Grid/bubble Size Ratio

Computational Fluid Dynamics in the Design and Analysis of Thermal Processes: A Review of Recent Advances

Towards a new paradigm in intelligence-driven computational fluid dynamics simulations

The Status of Computational Fluid Dynamics

A review: Fundamentals of computational fluid dynamics (CFD)

The new direction of computational fluid dynamics and its application in industry

An iterated greedy heuristic for multistage hybrid flowshop scheduling problems with multiprocessor tasks

Computational Acceleration of Multi-Dimensional Reactive Flow Modelling Using Diesel/biodiesel/jet-Fuel Surrogate Mechanisms Via a Clustered Dynamic Adaptive Chemistry Method

Review and implementation of CFD-DEM applied to chemical process systems