Abstract:Previous studies on the austenite grain growth were mostly based on a fixed temperature, and the relationship between the austenite grain and austenitizing parameters was fitted according to the results. However, there is a lack of quantitative research on the austenite grain growth during the heating process. In the present work, based on the diffusion principle of the controlled Ti microalloying element, the diffusion process of carbonitrides containing Ti during the heating process was analyzed. Combined with the precipitation model and the austenite growth model, the prediction model of austenite grain growth of Ti microalloyed steel during different heat treatment processes was established. The austenite grain size versus the temperature at four different heating rates of 0.5, 1, 10, 100 °C/s was calculated. The grain growth behavior of austenite during the heating process of Ti microalloyed steel was studied by optical microscope, scanning electron microscope and transmission electron microscope. The experimental data of the austenite grain size was in good agreement with the calculation by the proposed model, which provides a new idea for the prediction of austenite grain size in non-equilibrium state during the heating process. In addition, for Ti-containing microalloyed steels, the austenite grain size increased with the increasing heating temperature, while it changed little by further prolonging isothermal time after certain heating time, which was related to the equilibrium degree of the precipitation and the dissolution of Ti element. The austenite grain coarsening temperature of the tested Ti microalloyed steel was estimated within 1100~1200 °C.

Study on Grain Growth Behavior of Ti-1300 Alloy in Heat Treatment Process

Research on Grain Growth Behavior of TB8 Titanium Alloy

Effect of Heat Treatment on Microstructure and Properties of Ti84Al11FeMo4 Titanium Alloy

KINETICS OF GRAIN GROWTH IN A FORGED TiAl-BASED ALLOY

Kinetics Of Grain Growth In Forged Tial During Heat-Treatment

Austenite Growth Behavior and Prediction Modeling of Ti Microalloyed Steel

Study on Microstructure and Mechanical Properties of Metastable Β-Ti Alloy

Effects of Heat Treatment on Microstructure of TC6 Titanium Alloy

Research on Grain Growth Behavior in Β Single Phase of TC21 Ti Alloy

Microstructure Evolution Behavior of Titanium Microalloyed Steel during Heat Treatment

Beta Grain Growth Behaviour of Tg6 and Ti17 Titanium Alloys

Isothermal β grain growth kinetics and mechanical properties of Ti-351 titanium alloy

B2 Grain Growth Behavior of a Ti-22Al-25Nb Alloy Fabricated by Hot Pressing Sintering

Dependence of Mechanical Behavior on Grain Size of Metastable Ti–Nb–O Titanium Alloy

Effect Of Heat Treatment Process On Microstructure And Tensile Properties Of Ti-1300 Alloy

Study on synthesis and grain growth kinetics of in-situ TiB2/Fe3Al nanocomposite (II) - Structural evolution and grain growth kinetics of the mechanically alloyed Fe-Al-Ti-B quaternary powder during heat treatment

B2 Grain Growth and Particle Pinning Effect of Ti-22Al-25Nb Orthorhombic Intermetallic Alloy During Heating Process

Microstructural Evolution of A Forged Tial Based Alloy During Heat Treatment at Subtransus Temperature

Effects of Heat Treatment on Mechanical Properties and Microstructure Evolutions of Ti-5321 Alloy

Microstructural Evolution and Mechanical Properties of Ti–5Al–5Mo–5V–3Cr Alloy by Heat Treatment with Continuous Temperature Gradient

Isothermal Beta Grain Growth Kinetics of TC4-DT Titanium Alloy under Two Different Prior Processing Conditions: Deformed Vs. Undeformed