Abstract:In the biofilm wastewater treatment process, the start-up period of biofilm process is affected by the biofilm formation on the surface of carriers. Controlling surface charge property of carriers could accelerate the biofilm formation. The surface of conventional biofilm carriers, such as polyethylene (PE), polypropylene (PP) and high-density polyethylene (HDPE) is negatively charged, as is the surface of bacterial cells of activated sludge, which could lead to electrostatic repulsion between the biofilm carriers and the bacteria. Herein, the conventional high-density polyethylene (HDPE) carriers were modified by two kinds of positively charged polymers with different charge strength, which were noted as polyquaternium-10 (PQAS-10) and cationicpolyacrylamides (CPAM), respectively, to accelerate the startup of biofilm-based wastewater treatment process. The results showed that the positive Zeta potential was measured on the surface of modified carriers, whereas the surface Zeta potential of unmodified carriers was negative. It indicated that the modified carriers carried positive charge. Furthermore, the positive charge on the modified PQAS-10 carriers was higher than that on the modified CPAM carriers. The reactor with modified PQAS-10 carriers achieved shorter reactor start-up time and higher attached biomass compared to that with unmodified carriers and modified CPAM carriers. As a result, the removal efficiencies of COD, NH4+-N and TN in the reactor with the modified carriers were higher than that with the unmodified carriers. These findings demonstrated that the success of electrophilic modification on the surface of carriers was expected to accelerate the startup of biofilm-based reactors and improve the reactor performance in the practical application.

Study on Synthesis of a Hydrophilic Porous Carrier and Its Properties for Biofilm Formation in Three-phase Fluidized Bed Reactor

Study on Preparation and Performance of Hydrophilic Porous Carrier

Process of biofilm colonization of a hydrophilic porous carrier in fluidized bed reactor

Preparation and Biofilm Culturing Characteristics of a Novel Porous Carrier

Modification of Polyurethane Foam Carriers and Application in A Moving Bed Biofilm Reactor

Hydraulic characterization and start-up of a novel circulating flow bio-carriers

Preparation and Application of Biomass Carrier with Slow Release of Nutrients

Tailored Surface Porosity of Polyethylene-Based Co-continuous Structures for Moving Bed Biofilm Reactor Carriers

A Novel Bio-carrier Fabricated Using 3D Printing Technique for Wastewater Treatment

Surface modification and characterization of polyethylene bio-carrier for wastewater treatment

Influence of surface modification of polyethylene biocarriers on biofilm properties and wastewater treatment efficiency in moving-bed biofilm reactors.

Accelerated Startup of Moving Bed Biofilm Process with Novel Electrophilic Suspended Biofilm Carriers

Biofilm formation on the spherical carrier of polyurethane foams treating petrochemical wastewater

Accelerated Start-Up of Moving Bed Biofilm Reactor by Using a Novel Suspended Carrier with Porous Surface

A Novel Strategy for Rapid Formation of Biofilm: Polylactic Acid Mixed with Bioflocculant Modified Carriers

Flow Characteristics of Low-density Porous Particles in a Three-phase Circulating Fluidized Bed

Study on the Hydrodynamic Performance and Treatment Effect of a Modified Biological Carrier in Wastewater Treatment.

COMPARATIVE RESEARCH ON ACTIVATED-CARBON SUSPENDING CARRIERS OF MBBR

Effluence of Two Methods of Surface Modification on the Biofilm Characteristics Attached on the Polyethylene Carrier

Characteristics and Performances of Biofilm Carrier Prepared from Agro-Based Biochar