Abstract:Ammonia is a carbon-free hydrogen carrier, and development of non-noble metal catalyst to decompose ammonia into hydrogen is desirable for practical applications. However, the metal catalyst is challenged by the sintering of metal particles under high-temperature reaction conditions. In this study, a series of Li-, Al-, and Co-containing hydrotalcite-like compounds (HTlc) were synthesized by co-precipitation and used as precursors to prepare well-dispersed and thermally stable Co nanoparticle catalysts for ammonia decomposition. The obtained precursors and catalysts were characterized by means of X-ray powder diffraction (XRD), temperature-programmed reduction (H 2 -TPR), X-ray photoelectron spectroscopy (XPS), high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), and so on. All of the precursors formed hydrotalcite-like phase, which consisted of Li–Al–(Co) HTlc and/or Co–Al HTlc dependent on the Co content. Upon calcination at 500 °C, HTlc decomposed into an Al-substituted Co 3 O 4 spinel oxide, as confirmed by two distinctly separated reduction steps in H 2 -TPR. Following reduction at 700 °C, well-dispersed Co metal nanoparticles with an average particle size of ∼9.2–12.4 nm were obtained. It was suggested that the incorporation of Al 3+ into Co 3 O 4 led to a strong interaction between cobalt and aluminum, which suppressed the crystal growth of Co 3 O 4 and the sintering of Co metal during the thermal treatments, resulting in good Co dispersion. The optimal LiAlCo(1.5) catalyst showed superior activity than that prepared by impregnation method, giving almost complete conversion of ammonia at 575 °C under a space velocity of 5,000 mL g cat –1 h –1 . More importantly, this catalyst maintained stable activity at 625 °C for 100 h, exhibiting high stability and sintering resistance. The good catalytic performance was attributed to the high Co metal dispersion and strong metal–support interaction benefiting from the uniform distribution of cobalt in the HTlc precursor. These results demonstrate the applicability of HTlc to the preparation of metal catalysts with improved dispersion and thermal stability.

Improving the NOx Decomposition and Storage Activity Through Co-Incorporating Ammonium and Copper Ions into Mg/Al Hydrotalcites

[Nox Storage and Decomposition Behavior of Cu-Mg-Al Catalyst].

Excellent Catalysis of Various TiO 2 Dopants with Na 0.46 TiO 2 in Situ Formedon the Enhanced Dehydrogenation Properties of NaMgH 3

Effects of substituting iron for aluminum on the low-temperature catalytic activity and sulfur resistance of hydrotalcite-derived LNT catalysts

Promoting Metal Oxides–zeolite Electron Interaction on MnCeOx/HY Catalyst for Boosting Nitrogen Oxides Reduction

Ti 3 AlCN MAX for tailoring MgH 2 hydrogen storage material: from performance to mechanism

Achieving superior hydrogen storage properties of MgH<sub>2</sub> by the effect of TiFe and carbon nanotubes

Improving MgH2 formation kinetics and its effect on NaBH4 synthesis

Carbon composite support improving catalytic effect of NbC nanoparticles on the low-temperature hydrogen storage performance of MgH2

Enhanced hydrothermal stability of Cu-SSZ-13 by compositing with Cu-SAPO-34 in selective catalytic reduction of nitrogen oxides with ammonia

Novel NO trapping catalysts derived from Co-Mg/X-Al (X = Fe, Mn, Zr, La) hydrotalcite-like compounds

Enhancing the activity and sulfur resistance of CuFeAlO x catalyst via the structure effect for the simultaneous removal of Hg 0 and NO at wide temperature

Facile synthesis of MXene-supported copper oxide nanocomposites for catalyzing the decomposition of ammonium perchlorate

Hydrotalcite-derived well-dispersed and thermally stable cobalt nanoparticle catalyst for ammonia decomposition

Co-Cu-Al hydrotalcit: Preparation and catalytic activities in NO + CO reaction

Characterization and Electrochemical Behaviour of Nanoscale Hydrotalcite-Like Compounds toward the Reduction of Nitrate

Influence of reduction conditions on the structure-activity relationships of NaNO 3 -promoted Ni/MgO dual function materials for integrated CO 2 capture and methanation

Effect of Ti0.9Zr0.1Mn1.5V0.3 alloy catalyst on hydrogen storage kinetics and cycling stability of magnesium hydride

Investigation of the effect of bimetallic Zn-Mg modified Al2O3 carriers modulating Ag species on the performance of H2-assisted C3H6-SCR and the mechanism

Enhanced hydrogen storage performance of Mg-Cu-Ni system catalyzed by CeO2 additive

Highly active bimetallic MOF derivatives for improving the dehydrogenation performance of LiAlH 4