Unconventional electro-Fenton process operating at a wide pH range with Ni foam cathode and tripolyphosphate electrolyte
Fengxia Deng,Hugo Olvera-Vargas,Orlando Garcia-Rodriguez,Shan Qiu,Fang Ma,Zhonglin Chen,Olivier Lefebvre
DOI: https://doi.org/10.1016/j.jhazmat.2020.122641
IF: 13.6
2020-09-01
Journal of Hazardous Materials
Abstract:<p>We propose an unconventional electro-Fenton (EF) system with a nickel-foam (Ni-F) cathode and tripolyphosphate (3-PP) electrolyte at near-neutral pH (EF/Ni-F-3-PP) to overcome pH restrictions in EF while preventing Ni-F corrosion. Response surface modelling was used to optimize the main operating parameters with a model prediction analysis (R<sup>2</sup> =0.99): pH=5.8, Fe<sup>2+</sup>=3.0 mM and applied current=349.6 mA. Among the three variables, the pH exerted the highest influence on the process. Under optimal conditions, 100% of phenol removal was achieved in 25 min with a pseudo-first-order apparent rate constant (<em>k<sub>app</sub></em>) of 0.2 min<sup>-1</sup>, 3.2-fold higher than the <em>k<sub>app</sub></em> of EF/Ni-F with SO<sub>4</sub><sup>2-</sup> electrolyte at pH 3. A mineralization yield of 81.5% was attained after 2 h; furthermore, it was found that 3-PP enhanced H<sub>2</sub>O<sub>2</sub> accumulation by preventing bulk H<sub>2</sub>O<sub>2</sub> decomposition. Finally, toxicity evaluation revealed the formation of toxic by-products at the early stages of treatment, which were totally depleted after 2 h, demonstrating the detoxifying capacity of the system. In conclusion, this study shows for the first time the potential of Ni-F as a cathode for EF under near-neutral conditions, rendered possible by the 3PP electrolyte. Under these conditions, the Ni-F corrosion issue could be alleviated.</p>
environmental sciences,engineering, environmental