Abstract:The fully reversible axial flow fans,which can rotate reversibly to ventilate in the opposite direction with the same performance curves,are widely demanded in subways,tunnels,underground warehouses and many other fields. A new configuration method,which can obviously improve the efficiency of reversible axial flow fans,is proposed to meet this special requirement. The new approach is to install two rows of blade with reverse symmetrical airfoil section at stagger angle of 90° on both sides of the rotor of reversible axial fans. The same computational domain is used for reversible flow fans with and without the two-row guide vanes,and the detailed numerical studies reveal that the upstream blade row has little influence on the direction of the incoming flow while the downstream blade row working as a straightener reduces the circumferential velocity of the rotor-exit air remarkably and makes the outlet air flow in nearly axial direction in the diffuser. This leads to a greatly decreased friction loss,and the greater the rate of divergence in the diffuser is,the more obvious the effect will be. In addition,part of the swirl dynamic energy of the rotor-exit air is recovered and changed into static pressure rise. The above two mechanisms contribute to the evident increase in both total pressure rise and efficiency of the new type of reversible axial fans with additional blade rows than those without any stators. Furthermore,the installation of the blade rows on both sides of the fully reversible axial fan guarantees a symmetric configuration and consequently guarantees the fully reversible performance also.

Numerical Investigation on a New Type of Fully Reversible Axial Fan with Two Blade Rows on Both Sides of the Rotor