Abstract:This study offers a novel 3D bioprinting method based on hollow calcium alginate filaments by using a coaxial nozzle, in which high strength cell-laden hydrogel 3D structures with built-in microchannels can be fabricated by controlling the crosslinking time to realize fusion of adjacent hollow filaments. A 3D bioprinting system with a Z-shape platform was used to realize layer-by-layer fabrication of cell-laden hydrogel structures. Curving, straight, stretched or fractured filaments can be formed by changes to the filament extrusion speed or the platform movement speed. To print a 3D structure, we first adjusted the concentration and flow rate of the sodium alginate and calcium chloride solution in the crosslinking process to get partially crosslinked filaments. Next, a motorized XY stages with the coaxial nozzle attached was used to control adjacent hollow filament deposition in the precise location for fusion. Then the Z stage attached with a Z-shape platform moved down sequentially to print layers of structure. And the printing process always kept the top two layers fusing and the below layers solidifying. Finally, the Z stage moved down to keep the printed structure immersed in the CaCl2 solution for complete crosslinking. The mechanical properties of the resulting fused structures were investigated. High-strength structures can be formed using higher concentrations of sodium alginate solution with smaller distance between adjacent hollow filaments. In addition, cell viability of this method was investigated, and the findings show that the viability of L929 mouse fibroblasts in the hollow constructs was higher than that in alginate structures without built-in microchannels. Compared with other bioprinting methods, this study is an important technique to allow easy fabrication of lager-scale organs with built-in microchannels.

Direct Writing Alginate Bioink Inside Pre-Polymers of Hydrogels to Create Patterned Vascular Networks

Freeform Vertical and Horizontal Fabrication of Alginate-Based Vascular-Like Tubular Constructs Using Inkjetting

Directly Coaxial 3D Bioprinting of Large-Scale Vascularized Tissue Constructs.

3D Bioprinting of Vessel-like Structures with Multilevel Fluidic Channels

Microfluidic Printing of Tunable Hollow Microfibers for Vascular Tissue Engineering.

Thermo-sensitive Sacrificial Microsphere-based Bioink for Centimeter-scale Tissue with Angiogenesis

Coaxial Nozzle-Assisted 3D Bioprinting with Built-in Microchannels for Nutrients Delivery.

Formation of Stable Vascular Networks by 3D Coaxial Printing and Schiff-Based Reaction

Autonomously Self-Adhesive Hydrogels as Building Blocks for Additive Manufacturing.

Engineering interconnected 3D vascular networks in hydrogels using molded sodium alginate lattice as the sacrificial template.

Coaxial Electrohydrodynamic Bioprinting of Pre-vascularized Cell-laden Constructs for Tissue Engineering

Rapid fabrication of gelatin-based scaffolds with prevascularized channels for organ regeneration

3D bioprinting microgels to construct implantable vascular tissue

Coaxial Embedded Printing of Gelatin Methacryloyl–alginate Double Network Hydrogel for Multilayer Vascular Tubes

Single-Step 3D Bioprinting of Alginate-Collagen Type I Hydrogel Fiber Rings to Promote Angiogenic Network Formation

Sequential assembly of cell-laden hydrogel constructs to engineer vascular-like microchannels.

Microfiber-Templated Porogel Bioinks Enable Tubular Interfaces and Microvascularization Down to the Building Blocks for 3D Bioprinting

Rapid Fabrication of Ready-to-Use Gelatin Scaffolds with Prevascular Networks Using Alginate Hollow Fibers as Sacrificial Templates

A Perfusable Multi‐Hydrogel Vasculature On‐Chip Engineered by 2‐Photon 3D Printing and Scaffold Molding to Improve Microfabrication Fidelity in Hydrogels

Simultaneous Deposition of Human Microvascular Endothelial Cells and Biomaterials for Human Microvasculature Fabrication Using Inkjet Printing

Human Microvasculature Fabrication Using Thermal Inkjet Printing Technology