Abstract:Porosity of functionally graded materials (FGMs) is usually aroused by fabrication defects. It had been proven that the porosity has a significant influence on the static responses of their structures, but the effects of porosity on buckling behaviors are still worth investigating. To reveal these effects, the thermal-mechanical coupling buckling issue of a clamped-clamped porous FGM sandwich beam is investigated in this paper by employing the high-order sinusoidal shear deformation theory. The modified Voigt mixture rule is used to approximate the temperature-dependent material properties of porous FGMs. The physical neutral plane of FGM sandwich beams is taken into account to reflect the actual condition of the structures and simplify the calculation. The thermal environments are considered as uniform, linear and nonlinear temperature rises, and both the temperature independent and temperature-dependent material properties are discussed in order to justify the importance of the thermal-mechanical coupling effect. An iterative algorithm is used to solve the thermal-mechanical coupling critical buckling temperature. The present theoretical results are verified by comparing with the literature and ABAQUS results, and the effects of porosity, the physical neutral plane, gradient index, material temperature dependence, sandwich structural parameters are discussed. Results show that for buckling issue excluding the pre-buckling deformation effect, considering either the physical neutral plane or the geometrical middle plane of FGM beams would produce alike critical buckling temperatures. With the rise of porosity, the critical temperature increases greatly, which is quite different from the changing rule observed in the buckling issue of inplane-loaded porous FGM plates in literature. The beam with a smaller face-to-core ratio is more sensitive to the change in porosity. Moreover, to improve the thermal buckling load of FGM beams, ceramic constituents with the lower thermal expansion coefficient would be preferred.

Thermal postbuckling analysis of anisotropic laminated beams with tubular cross-section based on higher-order theory

Thermal postbuckling analysis of anisotropic laminated beams with different boundary conditions resting on two-parameter elastic foundations

Nonlinear Bending Analysis of Anisotropic Laminated Tubular Beams Based on Higher-Order Theory Subjected to Different Kinds of Distributed Loads

Thermal Postbuckling Behavior of 3D Braided Beams with Initial Geometric Imperfection under Different Type Temperature Distributions

Thermal Postbuckling Analysis of 3d Braided Composite Cylindrical Shells

Thermal Postbuckling of Shear-Deformable Anisotropic Laminated Cylindrical Shells with Temperature-Dependent Properties

A new set of explicit solutions for postbuckling behaviour of anisotropic shear deformable laminated cylindrical shells with general imperfection distribution and thermal loading

Vibration and Thermal Buckling Analyses of Multi-Span Composite Lattice Sandwich Beams

Thermal post-buckling analysis of imperfect laminated plates using a higher-order shear deformation theory

Non-linear buckling and postbuckling behavior of 3d braided cylindrical panels under axial compression in thermal environments

Thermal Buckling And Postbuckling Of Laminated Plates

Thermal Post-Buckling of an Elastic Beams Subjected to a Transversely Non-Uniform Temperature Rising

Thermal Postbuckling of Shear Deformable Multiscale Hybrid Composite Beams

Postbuckling of a Shear-Deformable Anisotropic Laminated Cylindrical Shell under External Pressure in Thermal Environments

Thermo-mechanical Coupled Behavior of Laminated Beams with Temperature-Dependent Viscoelastic Interlayers

Thermal-mechanical Coupling Buckling Analysis of Porous Functionally Graded Sandwich Beams Based on Physical Neutral Plane

Postbuckling Behavior of 3D Braided Rectangular Plates Subjected to Uniaxial Compression and Transverse Loads in Thermal Environments

Postbuckling of 3D Braided Composite Cylindrical Shells under Combined External Pressure and Axial Compression in Thermal Environments

Nonlinear Bending and Thermal Postbuckling of Functionally Graded Fiber Reinforced Composite Laminated Beams with Piezoelectric Fiber Reinforced Composite Actuators

Thermal Postbuckling Analysis of Imperfect Laminated Plates on Softening Non-Linear Elastic Foundations

Post-Buckling Behavior of Sandwich Composite Beams Made of FGM Faces and FGP Core Under High-Temperature Loads