Notice of Retraction Study on Chemical Phosphorus Removal from Industry Wastewater

Fang Zhu,Wenzhen Jia,Chang Cheng
DOI: https://doi.org/10.1109/icbbe.2011.5781072
2011-01-01
Abstract:Notice of Retraction After careful and considered review of the content of this paper by a duly constituted expert committee, this paper has been found to be in violation of IEEE's Publication Principles. We hereby retract the content of this paper. Reasonable effort should be made to remove all past references to this paper. The presenting author of this paper has the option to appeal this decision by contacting TPII@ieee.org. Coagulation process using poly aluminum chloride (PAC) was employed as the turbidity and phosphorus removal method for industry wastewater in this paper. Factors such as solution pH coagulant dosage and solution temperature that influence turbidity and phosphorus removal were experimentally tested. The results showed that the optimum dosage coagulant was 8mg/L when the pH = 7, this dosage was best for phosphorus removal, and turbidity removal rate could be reached over 90%; In the pH value 4-8 range when dosage coagulant was 8mg/L, phosphorus removal was the best when pH=6, while turbidity removal also could be reached over 88%, but different pH on effluent turbidity removal rates and phosphorus removal rates was not consistent; Under optimal pH value and dosage of coagulant conditions, the phosphorus removal rate and the turbidity removal rate was consistent. They both go up with the increasing temperature.
What problem does this paper attempt to address?