Insights into in Situ One-Step Synthesis of Carbon-Supported Nano-Particulate Gold-Based Catalysts for Efficient Electrocatalytic CO2 Reduction

Yicheng Zhang,Liang Hu,Weiqiang Han

DOI: https://doi.org/10.1039/c8ta08698b

IF: 11.9

2018-01-01

Journal of Materials Chemistry A

Abstract:Carbon-supported gold/gold compound catalysts prepared by directly forming nanoparticles on carbon are easily available and efficient for CO2 electroreduction.

What problem does this paper attempt to address?

Ni Single-Atom Catalysts for Highly Efficient Electrocatalytic CO2 Reduction: Hierarchical Porous Carbon As a Support and Plasma Modification

Qiulin Ye,Yaqi Peng,Dongdong Wang,Jiabao Lv,Yaoyue Yang,Yue Liu,Zhifu Qi,Songqiang Zhu,Chunliang Ge,Yan Yang,Angjian Wu,Shengyong Lu

DOI: https://doi.org/10.1039/d3se00858d

IF: 6.813

2023-01-01

Sustainable Energy & Fuels

Abstract:Ni-single atom catalysts with nitrogen-doped porous carbon as the support and plasma modification were adopted for efficient CO2RR to CO.
Multi-twinned Gold Nanoparticles with Tensile Surface Steps for Efficient Electrocatalytic CO2 Reduction

Li-Wei Chen,Yu-Chen Hao,Jiani Li,Linyu Hu,Yu Guo,Shuai Li,Di Liu,Zhejiaji Zhu,Si-Qian Wu,Hui-Zi Huang,An-Xiang Yin,Bo Wang,Ya-Wen Zhang

DOI: https://doi.org/10.1007/s11426-022-1315-x

2022-01-01

Science China Chemistry

Abstract:CO2 reduction reactions (CO2RR) powered by renewable electricity can directly convert CO2 to hydrocarbons and fix the intermittent sustainable energy in portable chemical fuels. It is of great importance to develop advanced catalysts that can boost CO2RR with high activity, selectivity, and efficiency at low overpotentials. Here, we report the solution synthesis using H2O2 to modify the surface structures of gold multi-twinned nanoparticles (AuMPs) and create tensile surface steps. Calculations predicted significantly enhanced CO2 adsorption and boosted CO2RR capabilities with inhibited hydrogen evolution reaction activity for the tensile surface steps with modified electronic structure. The H2O2-treated AuMPs with surface steps and 3.83
Ultrahigh Mass Activity for Carbon Dioxide Reduction Enabled by Gold-Iron Core-Shell Nanoparticles.

Kun Sun,Tao Cheng,Lina Wu,Yongfeng Hu,Jigang Zhou,Aimee Maclennan,Zhaohua Jiang,Yunzhi Gao,William A. Goddard,Zhijiang Wang

DOI: https://doi.org/10.1021/jacs.7b09251

IF: 15

2017-01-01

Journal of the American Chemical Society

Abstract:Wide application of carbon dioxide (CO2) electrochemical energy storage requires catalysts with high mass activity. Alloy catalysts can achieve superior performance to single metals while reducing the cost by finely tuning the composition and morphology. We used in silico quantum mechanics rapid screening to identify Au-Fe as a candidate improving CO2 reduction and then synthesized and tested it experimentally. The synthesized Au-Fe alloy catalyst evolves quickly into a stable Au-Fe core-shell nanoparticle (AuFe-CSNP) after leaching out surface Fe. This AuFe-CSNP exhibits exclusive CO selectivity, long-term stability, nearly a 100-fold increase in mass activity toward CO2 reduction compared with Au NP, and 0.2 V lower in overpotential. Calculations show that surface defects due to Fe leaching contribute significantly to decrease the overpotential.
One-pot facile synthesis of PtCu coated nanoporous gold with unique catalytic activity toward the oxygen reduction reaction

Hongjie Zhang,Baolian Yi,Yachao Zeng,Shangfeng Jiang,Yongyi Jiang,Yangzhi Bai,Zhigang Shao

DOI: https://doi.org/10.1039/C6RA05095F

IF: 4.036

2016-01-01

RSC Advances

Abstract:A facile one-pot protocol to fabricate a PtCu coated nanoporous gold (NPG) catalyst (PtCu@NPG) is described here. PtCu@NPG prepared by this novel method not only preserves the NPG 3-D nanostructure but it also presents a unique catalytic activity and durability toward the oxygen reduction reaction.
In Situ Nanoarchitecturing and Active-Site Engineering Toward Highly Efficient Carbonaceous Electrocatalysts

Kai Yuan,Chenbao Lu,Stavroula Sfaelou,Xiaxia Liao,Xiaodong Zhuang,Yiwang Chen,Ullrich Scherf,Xinliang Feng

DOI: https://doi.org/10.1016/j.nanoen.2019.02.043

IF: 17.6

2019-01-01

Nano Energy

Abstract:Oxygen reduction reaction (ORR) lies at the heart of many renewable energy technologies. Development of facile approaches toward highly active carbon materials for ORR is urgently desirable. We accidentally discovered a method for preparing heteroatom-doped carbon catalyst through an in situ self-templating and self-sacrificing strategy during the carbonization of a single polymer precursor. The prepared N,S co-doped and hierarchical porous carbon possesses a large specific surface area up to 2446 m(2) g(-1), which is the state-of-the-art among the porous carbons prepared by direct pyrolysis of linear polymer precursors. The use of in situ nanoarchitecturing and active-site engineering ensures that the N,S co-doped porous carbon catalyst has sufficient active sites for charge/mass transport and catalysis. As expected, as-prepared carbonaceous electrocatalyst exhibited superior ORR activity in both alkaline and acidic electrolytes and outperformed the state-of-the-art benchmark Pt/C and the best carbonaceous electrocatalysts for ORR in aqueous media so far. Moreover, the N,S co-doped carbon catalyst was demonstrated to be a highly efficient air cathode for Zn-air batteries. Thus, this study provides a new and economical method of fabricating feasible carbon electrocatalysts with exceptional catalytic activities for energy conversion and storage.
Low-loading gold in situ doped with sulfur by biomolecule-assisted approach for promoted electrochemical carbon dioxide reduction

Meijie Tan,Xiaoqian Han,Sen Ru,Chao Zhang,Zhouru Ji,Zhaolin Shi,Guomeng Qiao,Yunying Wang,Ruixue Cui,Qiquan Luo,Jiqing Jiao,Yaguang Li,Tongbu Lu

DOI: https://doi.org/10.1007/s12274-022-4878-3

IF: 9.9

2022-10-18

Nano Research

Abstract:For electrochemical carbon dioxide reduction (CO2RR), CO2-to-CO conversion is considered an ideal route towards carbon neutrality for practical applications. Gold (Au) is known as a promising catalyst with high selectivity for CO; however, it suffers from high cost and low mass-specific activity. In this study, we design and prepare a catalyst featuring uniform S-doped Au nanoparticles on N-doped carbon support (denoted as S-Au/NC) by an in situ synthesis strategy using biomolecules. The S-Au/NC displays high activity and selectivity for CO in CO2RR with a Au loading as low as 0.4 wt.%. The Faradaic efficiency of CO (FECO) for S-Au/NC is above 95% at −0.75 V (vs. RHE); by contrast, the FECO of Au/NC (without S) is only 58%. The Tafel slope is 77.4 mV·dec−1, revealing a favorable kinetics process. Furthermore, S-Au/NC exhibits an excellent long-term stability for CO2RR. Density functional theory (DFT) calculations reveal that the S dopant can boost the activity by reducing the free energy change of the potential-limiting step (formation of the *COOH intermediate). This work not only demonstrates a model catalyst featuring significantly reduced use of noble metals, but also establishes an in situ synthesis strategy for preparing high-performance catalysts.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Recent Advances in Atomic‐Level Engineering of Nanostructured Catalysts for Electrochemical CO2 Reduction

Huiling Liu,Yating Zhu,Jianmin Ma,Zhicheng Zhang,Wenping Hu

DOI: https://doi.org/10.1002/adfm.201910534

IF: 19

2020-01-01

Advanced Functional Materials

Abstract:Electrochemical reduction of CO2 into value-added chemicals provides a promising approach to mitigate climate change caused by CO2 from excess consumption of fossil fuels. As the CO2 molecule is chemically inert and the reaction kinetics is sluggish, efficient electrocatalysts are thus highly required for promoting the conversion of CO2. With great efforts devoted to improving the catalytic performance, the development of electrocatalysts for CO2 reduction has gone from bulk metals with poor control to nanostructures with atomic precision. Nanostructured electrocatalysts with atomic precision are believed to be capable of combining the advantages of heterogeneous and homogenous catalysts. In this review, the recent advances in designing nanostructured electrocatalysts at the atomic level for boosting the catalytic performance toward CO2 reduction and revealing the structure-property relationship are summarized. The challenges and opportunities in the near future are also proposed for paving the development of electrocatalytic CO2 reduction.
Enhancing CO Oxidation Activity Via Tuning a Charge Transfer Between Gold Nanoparticles and Supports

Haotian Yang,Jiajie Cen,Qiyuan Wu,Claron J. Ridge,Xiao Tong,Chenyu Zhou,Vijayen Veerasamy,Dong Su,C. Michael Lindsay,Mingzhao Liu,Alexander Orlov

DOI: https://doi.org/10.1021/acs.jpcc.1c10072

2022-01-01

The Journal of Physical Chemistry C

Abstract:Charge transfer from the supports to nanoparticles at the interface is one of the key factors to determine the catalytic performances of supported nanoparticles. In this work, we showed in a systematic way that the charge transfer from semiconductor supports to Au nanoparticle catalysts can lower the onset temperature toward CO oxidation. For this study, a novel Au/SiO2/Si composite system synthesized by the helium droplet deposition method with precisely tuned SiO2 layer thickness was fabricated to control the magnitude of interfacial charge transfer. With the support of X- ray photoelectron spectroscopy and numerical simulations, it was demonstrated that the Schottky barrier formed across the Au/SiO2/Si heterojunction led to a negative charge accumulation on the surface of Au nanoparticles. In turn, this additional charge can be transferred to the anti-bonding orbital of adsorbed O-2 molecules to activate the O-O bonds, leading to enhanced CO oxidation. In addition to the charge transfer mechanism, the role of a strong electric field arising from the formation of the Schottky barrier was also explored to explain the observed enhancement of catalytic reactivity. Overall, this work highlights an important pathway for systematically tuning metal-support interactions to accelerate catalytic reactions and designing the next generation of nanocatalysts.
Enhanced electrocatalytic CO2 reduction via field-induced reagent concentration

Min Liu,Yuanjie Pang,Bo Zhang,Phil De Luna,Oleksandr Voznyy,Jixian Xu,Xueli Zheng,Cao Thang Dinh,Fengjia Fan,Changhong Cao,F. Pelayo García de Arquer,Tina Saberi Safaei,Adam Mepham,Anna Klinkova,Eugenia Kumacheva,Tobin Filleter,David Sinton,Shana O. Kelley,Edward H. Sargent

DOI: https://doi.org/10.1038/nature19060

IF: 64.8

2016-08-03

Nature

Abstract:Gold and palladium nanoneedle electrocatalysts benefit from field-induced reagent concentration to improve the efficiency of carbon dioxide reduction in the synthesis of carbon-based fuels using renewable electricity.

multidisciplinary sciences
Synergistic Chemisorbing and Electronic Effects for Efficient CO2 Reduction Using Cysteamine-Functionalized Gold Nanoparticles

Zhijiang Wang,Kun Sun,Caiyun Liang,Lina Wu,Zhuangzhuang Niu,Jianmin Gao

DOI: https://doi.org/10.1021/acsaem.8b01699

IF: 6.4

2019-01-01

ACS Applied Energy Materials

Abstract:Inspired by the architectural feature of the natural enzyme of carbon monoxide dehydrogenase, cysteamine-capped Au nanoparticles (CA–Au NPs) are investigated with remarkable mass activity for CO2 reduction. CA–Au NPs exhibit exclusive CO selectivity, low onset overpotential, and a 110-fold enhancement in mass activity compared with ligand-free Au NPs. Electronic structure and in situ spectroscopy analyses indicate that increased activity is due to the electronic effect derived from thiolate anchoring on the surface and chemisorbing CO2 and intermediates by terminal -NH2 functional groups. Our study provides the basis for fabricating effective catalysts for CO2 reduction.
Undercoordinated Active Sites on 4H Gold Nanostructures for CO 2 Reduction

Yuxuan Wang,Chenyang Li,Zhanxi Fan,Ye Chen,Xing Li,Liang Cao,Canhui Wang,Lei Wang,Dong Su,Hua Zhang,Tim Mueller,Chao Wang

DOI: https://doi.org/10.1021/acs.nanolett.0c03073

IF: 10.8

2020-10-26

Nano Letters

Abstract:Electroreduction of CO2 is a promising approach toward artificial carbon recycling. The rate and product selectivity of this reaction are highly sensitive to the surface structures of electrocatalysts. We report here 4H Au nanostructures as advanced electrocatalysts for highly active and selective reduction of CO2 to CO. Au nanoribbons in the pure 4H phase, Au nanorods in the hybrid 4H/fcc phase, and those in the fcc phase are comparatively studied for the electroreduction of CO2. Both the activity and selectivity for CO production were found to exhibit the trend 4H-nanoribbons > 4H/fcc-nanorods > fcc-nanorods, with the 4H-nanoribbons achieving >90% Faradaic efficiency toward CO. Electrochemical probing and cluster expansion simulations are combined to elucidate the surface structures of these nanocrystals. The combination of crystal phase and shape control gives rise to the preferential exposure of undercoordinated sites. Further density functional theory calculations confirm the high reactivity of such undercoordinated sites.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.nanolett.0c03073?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.nanolett.0c03073</a>.Additional details about materials, experimental procedures, computational methods, post-experiment characterizations, the Wulff construction of Au nanocrystals, and the adsorption energies of Pb and key CO2RR intermediates on different Au facets, including Figures S1–S16 and Tables S1–S6 (<a class="ext-link" href="/doi/suppl/10.1021/acs.nanolett.0c03073/suppl_file/nl0c03073_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Nanostructured cobalt/copper catalysts for efficient electrochemical carbon dioxide reduction

Sharon Abner,Aicheng Chen

DOI: https://doi.org/10.1039/d4nr00909f

IF: 6.7

2024-06-20

Nanoscale

Abstract:The search for an efficient and stable catalyst for the electrochemical reduction of CO 2 to value-added chemicals is especially critical for lowering the atmospheric CO 2 concentration. In this study, self-supported cobalt/copper nanostructured catalysts were designed, where the influences of the elemental composition and acid-etching on their efficiency towards the CO 2 reduction reaction were studied. The developed Co/Cu catalysts showed superb catalytic activity with a low onset potential at −0.2 V vs. RHE. Gas and liquid product analysis revealed that formate and CO were the main products. It was observed that lower reductive potentials were favourable for formate production, while higher reductive potentials were more favourable for CO formation. In situ electrochemical FTIR studies were further conducted to gain insight into the CO 2 reduction mechanism. The novel synthetic procedure reported in this study leads to promising electrocatalysts with high efficiencies for the conversion of CO 2 into valuable products.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Electrochemical Fabrication and Reactivation of Nanoporous Gold with Abundant Surface Steps for CO 2 Reduction

Xianglong Lu,Tianshui Yu,Hailing Wang,Lihua Qian,Pengxiang Lei

DOI: https://doi.org/10.1021/acscatal.0c00627

IF: 12.9

2020-07-14

ACS Catalysis

Abstract:Distinct from bulk materials, dealloyed nanoporous metals possess a large electrochemical surface area and abundant surface steps that are active for electrochemical reactions. Herein we fabricate a nanoporous gold electrocatalyst by electrochemical dealloying of potential cycling, which enables reducing carbon dioxide to carbon monoxide with a Faradaic efficiency of up to 98% at an overpotential of 390 mV. Pb-upd measurements verify that the high activity stems from the high density of step/kink sites with geometrically needed high-index facets on the curved internal surface. Moreover, a combination of X-ray photoelectron spectroscopy and in situ stripping voltammograms reveals that catalysis decay during long-term stability test results from the reduction of surface step/kink sites and the deposition of metal impurities (Zn, Pb, and Cu). The catalytic performance of the deactivated electrode can be recovered by applying potential cycling, which can restore the fractions of step/kink sites and remove surface metal impurities simultaneously.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acscatal.0c00627?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acscatal.0c00627</a>.Experiment sectional (fabrications of the pc-NPG and cd-NPG electrodes, microstructural characterizations, electrochemical characterizations, and product analysis), EDS analysis, XPS, Pb-upd measurements, and summary of the fractions of internal surface facets for the NPG electrodes in various states (<a class="ext-link" href="/doi/suppl/10.1021/acscatal.0c00627/suppl_file/cs0c00627_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

chemistry, physical
One-pot solvothermal synthesis of reduced graphene oxide-supported uniform PtCo nanocrystals for efficient and robust electrocatalysis

Han-Bin Meng,Xiao-Fang Zhang,Yu-Lu Pu,Xue-Lu Chen,Jiu-Ju Feng,De-Man Han,Ai-Jun Wang

DOI: https://doi.org/10.1016/j.jcis.2019.01.110

2019-05-01

Abstract:Pt-based nanocomposites with low Pt utilization and high-activity by incorporating with other transition metals have received significant interest in catalysis. Meanwhile, loading Pt-based catalysts on graphene has great research value for improved stability and dispersity of the catalysts. Herein, a facile l-proline-mediated solvothermal strategy was reported to construct reduced graphene oxide (rGO) supported sheet-like PtCo nanocrystals (Pt78Co22 NCs/rGO) in ethylene glycol (EG). The as-synthesized nanocomposite manifested remarkably improved catalytic properties and chemical stability for oxygen reduction reaction (ORR) and hydrogen evolution reaction (HER), surpassing home-made Pt29Co71 nanoparticles (NPs)/rGO, Pt83Co17 NPs/rGO, Pt52Co48 NPs, commercial Pt/C and Pt black catalysts. These scenarios demonstrated an improved catalytic performances by tailoring the feeding ratio of Pt:Co and introducing rGO as a support. This work provides some new insights to design rGO-supported Pt-based catalysts by engineering the shapes and compositions in practical fuel cells.
Seeded Growth of Gold-Copper Janus Nanostructures As a Tandem Catalyst for Efficient Electroreduction of CO2 to C2+ Products

Yiqun Zheng,Jiawei Zhang,Zesong Ma,Gongguo Zhang,Haifeng Zhang,Xiaowei Fu,Yanyun Ma,Feng Liu,Maochang Liu,Hongwen Huang

DOI: https://doi.org/10.1002/smll.202201695

IF: 13.3

2022-01-01

Small

Abstract:Gold-copper (Au-Cu) Janus nanostructures (Au-Cu Janus NSs) are successfully prepared using N-oleyl-1,3-propanediamine as capping agent and Cu(acac)(2) as the precursor in a typical seeded growth strategy. By preferably depositing Cu atoms on one side of concave cubic Au seeds, the Cu part gradually grows larger as more Cu precursors are added, making the size tuning feasible in the range of 74-156 nm. When employed as an electrocatalyst for electrochemical CO2 reduction (CO2RR), the Au-Cu Janus NSs display superior performance to Au@Cu core-shell NSs and Cu NPs in terms of C2+ products selectivity (67%) and C2+ partial current density (-0.29 A cm(-2)). Combined experimental verification and theoretical simulations reveal that CO spillover from Au sites to the nearby Cu counterparts would enhance CO coverage and thus promote C-C coupling, highlighting the unique structural advantages of the Au-Cu Janus NSs toward deep reduction of CO2. The current work provides a facile strategy to fabricate tandem catalyst with a Janus structure and validates its structural advantages toward CO2RR, which are of critical importance for the rational design of efficient CO2RR catalyst.
Reduced graphene oxide supported gold nanoparticles for electrocatalytic reduction of carbon dioxide

Mohammad Saquib,Aditi Halder

DOI: https://doi.org/10.1007/s11051-018-4146-1

IF: 2.533

2018-02-01

Journal of Nanoparticle Research

Abstract:Electrochemical reduction of carbon dioxide is one of the methods which have the capability to recycle CO2 into valuable products for energy and industrial applications. This research article describes about a new electrocatalyst “reduced graphene oxide supported gold nanoparticles” for selective electrochemical conversion of carbon dioxide to carbon monoxide. The main aim for conversion of CO2 to CO lies in the fact that the latter is an important component of syn gas (a mixture of hydrogen and carbon monoxide), which is then converted into liquid fuel via well-known industrial process called Fischer-Tropsch process. In this work, we have synthesized different composites of the gold nanoparticles supported on defective reduced graphene oxide to evaluate the catalytic activity of reduced graphene oxide (RGO)-supported gold nanoparticles and the role of defective RGO support towards the electrochemical reduction of CO2. Electrochemical and impedance measurements demonstrate that higher concentration of gold nanoparticles on the graphene support led to remarkable decrease in the onset potential of 240 mV and increase in the current density for CO2 reduction. Lower impedance and Tafel slope values also clearly support our findings for the better performance of RGOAu than bare Au for CO2 reduction.Graphical abstractᅟ

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
Carbon Catalysts Empowering Sustainable Chemical Synthesis via Electrochemical CO2 Conversion and Two-Electron Oxygen Reduction Reaction

Yuying Zhao,Jithu Raj,Xiang Xu,Jianchun Jiang,Jingjie Wu,Mengmeng Fan

DOI: https://doi.org/10.1002/smll.202311163

IF: 13.3

2024-02-02

Small

Abstract:Carbon materials hold significant promise in electrocatalysis, particularly in electrochemical CO2 reduction reaction (eCO2 RR) and two-electron oxygen reduction reaction (2e- ORR). The pivotal factor in achieving exceptional overall catalytic performance in carbon catalysts is the strategic design of specific active sites and nanostructures. This work presents a comprehensive overview of recent developments in carbon electrocatalysts for eCO2 RR and 2e- ORR. The creation of active sites through single/dual heteroatom doping, functional group decoration, topological defect, and micro-nano structuring, along with their synergistic effects, is thoroughly examined. Elaboration on the catalytic mechanisms and structure-activity relationships of these active sites is provided. In addition to directly serving as electrocatalysts, this review explores the role of carbon matrix as a support in finely adjusting the reactivity of single-atom molecular catalysts. Finally, the work addresses the challenges and prospects associated with designing and fabricating carbon electrocatalysts, providing valuable insights into the future trajectory of this dynamic field.
Efficient CO 2 Electroreduction via Au‐Complex Derived Carbon Nanotube Supported Au Nanoclusters

Kun Sun,Yaoxuan Shi,Huiyi Li,Jingjing Shan,Chengyue Sun,Zhen‐yu Wu,Yujin Ji,Zhijiang Wang

DOI: https://doi.org/10.1002/cssc.202101972

IF: 8.4

2021-10-07

ChemSusChem

Abstract:The production of value-added chemicals from CO 2 electroreduction, using renewable energy, provides an appealing route to achieve the goal of carbon neutrality. Challenges remain in designing and understanding of high-performance catalyst with restructuring-behavior under electrochemical conditions. Here, we demonstrate the intrinsic performance enhancement of an Au-complex derived carbon nanotube supported Au nanoclusters catalyst for CO 2 reduction. Such catalyst exhibits the impressive activity for yielding CO in both H-cell and flow cell reactors. Our experimental results reveal that the synthesis procedure via metal complex reconstructing on proper support would induce charge transfer between Au nanoclusters and carbon nanotubes, forming a rather electron-rich state for Au active sites, that greatly contributes to the CO 2 activation pathway.

chemistry, multidisciplinary,green & sustainable science & technology
Unraveling the Simultaneous Enhancement of Selectivity and Durability on Single-Crystalline Gold Particles for Electrochemical CO2 Reduction

Yun Ji Lim,Dongho Seo,Syed Asad Abbas,Haeun Jung,Ahyeon Ma,Kug-Seung Lee,Gaehang Lee,Hosik Lee,Ki Min Nam

DOI: https://doi.org/10.1002/advs.202201491

Abstract:Electrochemical carbon dioxide reduction is a mild and eco-friendly approach for CO2 mitigation and producing value-added products. For selective electrochemical CO2 reduction, single-crystalline Au particles (octahedron, truncated-octahedron, and sphere) are synthesized by consecutive growth and chemical etching using a polydiallyldimethylammonium chloride (polyDDA) surfactant, and are surface-functionalized. Monodisperse, single-crystalline Au nanoparticles provide an ideal platform for evaluating the Au surface as a CO2 reduction catalyst. The polyDDA-Au cathode affords high catalytic activity for CO production, with >90% Faradaic efficiency over a wide potential range between -0.4 and -1.0 V versus RHE, along with high durability owing to the consecutive interaction between dimethylammonium and chloride on the Au surface. The influence of polyDDA on the Au particles, and the origins of the enhanced selectivity and stability are fully investigated using theoretical studies. Chemically adsorbed polyDDA is consecutively affected the initial adsorption of CO2 and the stability of the *CO2 , *COOH, and *CO intermediates during continuous CO2 reduction reaction. The polyDDA functionalization is extended to improving the CO Faradaic efficiency of other metal catalysts such as Ag and Zn, indicating its broad applicability for CO2 reduction.
Atomic-level-designed copper atoms on hierarchically porous gold architectures for high-efficiency electrochemical CO 2 reduction

Yang Zhao,Xunlin Liu,Dechao Chen,Zhixiao Liu,Qingcheng Yang,Xin Lin,Ming Peng,Pan Liu,Yongwen Tan

DOI: https://doi.org/10.1007/s40843-020-1583-4

2021-01-01

Abstract:Electrochemical CO 2 reduction is a promising technology for solving the CO 2 emission problems and producing value-added products. Here, we report a hierarchically porous Cu 1 Au single-atom alloy (SAA) as an efficient electrocatalyst for CO 2 reduction. Benefiting from the hierarchically porous architectures with abundant vacancies as well as three-dimensional accessible active sites, the as-prepared nanoporous Cu 1 Au SAA catalyst shows remarkable CO 2 reduction performance with nearly 100% CO Faraday efficiency in a wide potential range (−0.4 to −0.9 V vs. reversible hydrogen electrode. The in-situ X-ray absorption spectroscopy studies and density functional theory calculations reveal that the Cu-Au interface sites serve as the intrinsic active centers, which can facilitate the activated adsorption of CO 2 and stabilize the *COOH intermediate.

Insights into in Situ One-Step Synthesis of Carbon-Supported Nano-Particulate Gold-Based Catalysts for Efficient Electrocatalytic CO2 Reduction

Ni Single-Atom Catalysts for Highly Efficient Electrocatalytic CO2 Reduction: Hierarchical Porous Carbon As a Support and Plasma Modification

Multi-twinned Gold Nanoparticles with Tensile Surface Steps for Efficient Electrocatalytic CO2 Reduction

Ultrahigh Mass Activity for Carbon Dioxide Reduction Enabled by Gold-Iron Core-Shell Nanoparticles.

One-pot facile synthesis of PtCu coated nanoporous gold with unique catalytic activity toward the oxygen reduction reaction

In Situ Nanoarchitecturing and Active-Site Engineering Toward Highly Efficient Carbonaceous Electrocatalysts

Low-loading gold in situ doped with sulfur by biomolecule-assisted approach for promoted electrochemical carbon dioxide reduction

Recent Advances in Atomic‐Level Engineering of Nanostructured Catalysts for Electrochemical CO2 Reduction

Enhancing CO Oxidation Activity Via Tuning a Charge Transfer Between Gold Nanoparticles and Supports

Enhanced electrocatalytic CO2 reduction via field-induced reagent concentration

Synergistic Chemisorbing and Electronic Effects for Efficient CO2 Reduction Using Cysteamine-Functionalized Gold Nanoparticles

Undercoordinated Active Sites on 4H Gold Nanostructures for CO 2 Reduction

Nanostructured cobalt/copper catalysts for efficient electrochemical carbon dioxide reduction

Electrochemical Fabrication and Reactivation of Nanoporous Gold with Abundant Surface Steps for CO 2 Reduction

One-pot solvothermal synthesis of reduced graphene oxide-supported uniform PtCo nanocrystals for efficient and robust electrocatalysis

Seeded Growth of Gold-Copper Janus Nanostructures As a Tandem Catalyst for Efficient Electroreduction of CO2 to C2+ Products

Reduced graphene oxide supported gold nanoparticles for electrocatalytic reduction of carbon dioxide

Carbon Catalysts Empowering Sustainable Chemical Synthesis via Electrochemical CO2 Conversion and Two-Electron Oxygen Reduction Reaction

Efficient CO 2 Electroreduction via Au‐Complex Derived Carbon Nanotube Supported Au Nanoclusters

Unraveling the Simultaneous Enhancement of Selectivity and Durability on Single-Crystalline Gold Particles for Electrochemical CO2 Reduction

Atomic-level-designed copper atoms on hierarchically porous gold architectures for high-efficiency electrochemical CO 2 reduction