Abstract:Nowadays, pumps of different size are needed for a great variety of purposes. In the past, both computational fluid dynamics (CFD) and experimental flow visualization were performed to reveal flow characteristics within centrifugal pumps, to examine a specific design and to guide design improvement (see Burgreen et al. 1996, 2000). Li et al. (2007) studied the interior viscous flow in a mini pump with an asymmetric axis using CFD and PIV (particle image velocimetry) for improvement of the pump design. Matsui et al. (2002) adopted the the k-ω model in the CFD simulation for a centrfugal pump, and the computational grid system only consisted of one flow passage for LDV (laser Dopler velocimetry) test impeller. Byskov et al. (2003a) and Pedersen & Larsen (2003 b) investigated the flow inside the rotating passages of a six-bladed shrouded centrifugal pump impeller using LES simulation and PIV and LDV measurements. The velocities predicted with LES were in good agreement with the experimental data. The two RANS simulations were, however, not able to predict this complex flow field. It was thus found that using LES for analyzing the flow field in centrifugal pumps could shed light on basic fluid dynamic with a satisfactory accuracy compared to experiments. A transient simulation was used to study the effects of pulsatile blood flow due to the heartbeat through blood pumps by Song et al. (2003). The microsized geometry of the pump made the choice of turbulence models significant for the accuracy of calculation. The comparison showed that the k-ω model gave better predictions of the shear level within the near wall regions than the k-e model. Guleren and Pinarbasi (2004) indicated that the stallcell size extended from one to two diffuser passages. Comparisons of the computational results with experimental data were made and showed good agreement. The unsteady flow in a low specific speed radial diffuser was simulated by the CFD code CFX-10 by Feng et al. (2009). The PIV and LDV measurements had been conducted to validate the CFD results. Both the phase-averaged velocity fields and the turbulence fields obtained from different methods are presented and compared. In this study, in order to get more information about the internal flow of a centrifugal pump, both experimental measurement and numerical simulation are engaged. A centrifugal model pump test rig is built for PIV measurement. The test, involving the technology of index match and fluorescent, is for acquiring flow pattern in a fixed rotational speed, the velocity distribution of the flow field are thus obtained. And, the RANS (Reynolds

A Dynamic Simplified Lund Model for Large-Eddy Simulation and Its Application to a Centrifugal Pump

Modeling and Optimization for Submersible Pump Tubular Linear Motor Based on Dynamic Load Analysis

Comparative study of SGS models for simulating the flow in a centrifugal-pump impeller using single passage

An Improved Large Eddy Simulation of Two-Phase Flows in a Pump Impeller

Cavitation Performance Improvement of High Specific Speed Mixed-Flow Pump

Numerical Simulation on Internal Flow in the Screw Centrifugal Pulp Pump

Simulation of a Centrifugal Pump Based on a Lagrangian Particle Solver

Hydraulic Optimization and Loss Analyses of a Low Specific-Speed Centrifugal Pump with Variable-Thickness Blades

Numerical Analysis of Unstable Turbulent Flows in a Centrifugal Pump Impeller Considering the Curvature and Rotation Effect

Investigation of the integrated model of side chamber, wear-rings clearance and balancing holes for centrifugal pumps

Simulation of Dense Solid-Liquid Two-Phase Flow in a Pump Impeller

Numerical Simulation of Flow in Centrifugal Pump with Complex Impeller

Numerical investigation of flow features in the vaneless region of a centrifugal pump by large eddy simulation

Investigation of CFD Calculation Method of a Centrifugal Pump with Unshrouded Impeller

Computational Fluid Dynamics-Based Pump Redesign to Improve Efficiency and Decrease Unsteady Radial Forces

Numerical Simulation and Analysis of Solid-Liquid Two-Phase Flow in Centrifugal Pump

Numerical modelling of twin-screw pumps based on computational fluid dynamics

Numerical Simulation on the Steady and Unsteady Internal Flows of a Centrifugal Pump

Numerical Simulation of 3d Solid-Liquid Turbulent Flow in A Low Specific Speed Centrifugal Pump: Flow Field Analysis

Assessment of an Improved Delayed X-LES Hybrid Model for the Study of Off-Design Conditions in Centrifugal Pumps

Turbulent Flow Simulation Using Les with Dynamical Mixed One-Equation Subgrid Models in Complex Geometries