Abstract:An optimized handling stability control strategy is put forward aiming at enhancing a four in-wheel independent-drive motors electric vehicle (4WIDEV) performance capable of handling and stability. The optimized control strategy is designed by a hierarchical control structure, which mainly includes vehicle motion controller and vehicle torque distribution controller. Lateral stability controller, in-vehicle motion controller, which yields the generalized force and generalized yaw moment required of the vehicle, is designed into two modes: an instability control mode and a continuous control mode, which mode is activated determining by stability judgment controller based on phase portraits of sideslip angle and yaw rate. When the vehicle state exceeds the stability envelope region, instability control mode based on envelope control is utilized by sliding mode control method, simultaneously controlling the two-vehicle states variables, whereas continuous control mode is performed with adaptive adjustment of the weight parameter according to pre-defined stability degree. The lateral stability controller with adaptive switching two modes exhibits excellent handling stability performance under normal driving conditions, especially under critical conditions, such as on low tire-road adhesion coefficient. The vehicle torque distribution controller assigns driving or regenerative braking torque to four wheels reasonably and efficiently to satisfy the generalized force and the generalize yaw moment acquired by the vehicle motion controller, which synchronously considers the motor output capability and tire friction ellipse constraints while maintains each wheel slip ratio within the stable range. The results in co-simulation experiments based on Carsim and MATLAB/Simulink verify the proposed control strategy, compared with other control strategies, and demonstrate the effective improvement 4WIDEV’s performance in terms of handling stability especially under critical conditions.

Adaptive Launching Control Strategy of In-wheel Motor Driven Vehicle

Robust path following control of 4WID autonomous vehicle with driving condition adaptive mechanism

Optimized Handling Stability Control Strategy for a Four In-Wheel Motor Independent-Drive Electric Vehicle.

Performance-Oriented Coordinated Adaptive Robust Control For Four-Wheel Independently Driven Skid Steer Mobile Robot

An Anti-Slip Control Strategy with Modifying Target and Torque Reallocation for Heavy In-Wheel Motor Vehicle

Stability coordinated control strategy of autonomous unmanned 4WID-4WIS vehicle based on APD-LQR and AFSMC

Four-Wheel Independent Drive Electric Vehicle Stability Control Using Novel Adaptive Sliding Mode Control

Design of Torque Distribution Strategy for Four-Wheel-Independent-Drive Electric Vehicle

Nonlinear hierarchical control for four-wheel-independent-drive electric vehicle

Dynamic Stability Control Strategy Development for an In-Wheel Motorized Electric Vehicle

Coordinated Control for the Trajectory Tracking of Four-Wheel Independent Drive–Four-Wheel Independent Steering Electric Vehicles Based on the Extension Dynamic Stability Domain

Path tracking coordinated control strategy for autonomous four in-wheel-motor independent-drive vehicles with consideration of lateral stability

Dynamic Control for Four-Wheel Independent Drive Electric Vehicle

Coordinated Longitudinal and Lateral Motion Control for Four Wheel Independent Motor-Drive Electric Vehicle.

Design of a 4-Wheel Independent Steer and 4-Wheel Independent Drive Racing Vehicle

A Novel Nonlinear Adaptive Control Method for Longitudinal Speed Control for Four-Independent-Wheel Autonomous Vehicles

Vehicle pitch dynamics control using in-wheel motors

An Optimal Control Allocation Strategy for an Eight In-Wheel-motor Drive Electric Vehicle

Torque allocation strategy of 4WID in-wheel motor electric vehicle based on objective optimization

Integrated Control Strategy of Semi-Active Suspension and In-Wheel Motors for Handling Limit of Electric Race Car

An Optimized Control Strategy Based on Hierarchical Design, 4WS-4WD, NMPC, and Nonlinear Dynamics Models