Abstract:This study investigates the alternative of replacing noble metals by base metals as catalysts for selective hydrogenation of polyunsaturated hydrocarbons. Nickel catalysts are active for this type of reaction, but poorly selective. However, former calculations anticipated that Ni–Zn alloys could have higher selectivity to alkenes than monometallic Ni depending on the Ni/Zn atomic ratio in the alloy. In this contribution, Ni–Zn alloy nanoparticles supported on TiO2 are synthesized as catalysts for selective hydrogenation of acetylene and butadiene. The designed catalysts with 0.5 wt% Ni loading and various Ni/Zn nominal ratios are prepared by deposition–precipitation with urea (DPU). STEM-HAADF imaging coupled with EDS analysis reveals that Ni–Zn bimetallic particles are formed after reduction treatment at 450 °C. Alloying Ni with Zn leads to a slight increase in the average particle size and a broadening of the size distribution compared to monometallic Ni. However, the average Ni/Zn atomic ratio measured by EDS in the bimetallic particles is always higher than the nominal one, which could be due to Zn evaporation under the beam. The results of acetylene hydrogenation show that although the catalytic activity is slightly reduced after alloying Ni with Zn, the selectivity to ethylene is enhanced from 50% up to 85%, at the expense of the formation of oligomers (coupling products). However, the bimetallic Ni–Zn catalysts suffer from progressive deactivation in this reaction. During butadiene hydrogenation performed in the presence of an excess of propene, the bimetallic Ni–Zn/TiO2 catalysts are significantly more stable, with a high and constant selectivity to butenes (> 95%), compared with Ni/TiO2, which deactivates rapidly in the first hours. Some hypotheses concerning the observed differences in catalytic stability are discussed.

Effect of Ethylamines on the Hydrogenation of Toluene over Supported Nickel Catalysts

Study on the Ni Supported Catalysts Used for Hydrogenation of IPN to Produce MXDA

Synthesis of m-phenylenediamine from m-dinitrobenzene over silica-supported nickel catalyst

Effect of Amine Group on the Hydrogenation of Aromatic Rings over Ru/MgO-Al2O3 Catalysts

The effect of surface acidic and basic properties on the hydrogenation of aromatic rings over the supported nickel catalysts

Highly Loaded and Dispersed Cobalt Catalysts for the Hydrogenation of Toluene with Triethylamine

EFFECT OF AMMONIA ON SELECTIVE HYDROGENATION PERFORMANCE OF POLY-AROMATICS ON Ni-Mo-W/Al;O; AND Co-Mo/Al;O; CATALYSTS

Effect of Ammonia on the Performance of Catalysts for Selective Hydrogenation of 1-Methylnaphthalene

Correlating C═C, C═O, and C═N Hydrogenation Activity with Hydrogen Binding Energies on Ni–Fe Bimetallic Catalysts

Selective Hydrogenation of Naphthalene over γ-Al2O3-Supported NiCu and NiZn Bimetal Catalysts

Synergy of Mn and Ni Enhanced Catalytic Performance for Toluene Combustion over Ni-doped Α-Mno2 Catalysts

The insight into reaction mechanism of diethylamine catalytic abatement over various Cu-based catalysts

NiO x -promoted Cu-based catalysts supported on AlSBA-15 for chemoselective hydrogenation of nitroarenes

Preparation of Highly Loaded and Active Ni/Al_2O_3 Catalysts for the Hydrogenation of Aromatic Rings

Highly efficient selective hydrogenation of adiponitrile to hexamethylene diamine over barium and melamine formaldehyde resin-modified nickel-cobalt-based zeolitic imidazolate framework-derived catalyst

Understanding the electronic metal-support interactions of the supported Ni cluster for the catalytic hydrogenation of ethylene

Effect of Surface Acidic and Basic Properties of the Supported Nickel Catalysts on the Hydrogenation of Pyridine to Piperidine

Microcalorimetric adsorption and infrared spectroscopic studies of KNi/MgAlO catalysts for the hydrogenation of acetonitrile

Microcalorimetric Adsorption and Infrared Spectroscopic Studies of Supported Nickel Catalysts for the Hydrogenation of Diisopropylimine to Diisopropylamine

Bimetallic Ni–Zn/TiO2 catalysts for selective hydrogenation of alkyne and alkadiene impurities from alkenes stream

Enhancement of catalytic activity of PAl-NaX catalyst for side-chain alkylation of toluene with methanol: Effects of dehydrogenation component Cu