Abstract:Purpose – The dimple is adopted into a pin fin wedge duct which is widely used in modern gas turbine vane cooling structure trailing edge region. The purpose of this paper is to study the effects of dimple depth and duct converging angle on the endwall heat transfer and friction factor in this pin fin wedge duct. Design/methodology/approach – The study is carried out by using the numerical simulations. The diameter of dimples is the same as the pin fin diameter with an inline manner arrangement in relation to the pin fin. The ratio between dimple depth and dimple diameter is varied from 0 to 0.3 and the converging angle is ranging from 0° to 12.7°. The Reynolds number is between 10,000 and 50,000. Results of the endwall Nusselt number, friction factor, and flow structures are included. For convenience of comparison, the pin fin wedge duct with a converging angle of 12.7° without dimples is considered as the baseline. Findings – It is found that the dimples can effectively enhance the endwall heat transfer due to the impingement on the dimple surface, reattachment downstream the dimple and recirculation in front of the pin fin leading edge. By increasing the converging angle, the heat transfer is also increased but with a large friction factor penalty. In addition, the heat transfer enhancement for deep depth cases is 1.57 times higher than that of the low depth case. The thermal performance indicates that the intensity of heat transfer enhancement depends upon the dimple depth and converging angle. Originality/value – It suggests that the endwall heat transfer in a pin fin wedge duct can be increase by the adoption of dimples. The optimal dimple relative depth is 0.2 with low friction factor and high heat transfer performance.

Flow structure and heat transfer characteristics in a 90-deg turned pin fined duct with different dimple/protrusion depths

Flow Structure and Heat Transfer Characteristics of a 90°-Turned Pin-Finned Wedge Duct with Dimples at Different Locations

Flow structure and heat transfer characteristics of a rectangular channel with pin fins and dimples with different shapes

EFFECT OF DIMPLE/PROTRUSION DEPTH ON FLOW STRUCTURE AND HEAT TRANSFER IN A ROTATING CHANNEL WITH PIN FIN

A Numerical Study of the Flow and Heat Transfer in the Pin Fin-Dimple Channels with Various Dimple Depths

Heat Transfer Characteristics of a Dimpled/protrusioned Pin Fin Wedge Duct with Different Converging Angles for Turbine Blades

An Experimental and Numerical Study of Flow and Heat Transfer in Channels with Pin Fin-Dimple Combined Arrays of Different Configurations

Heat Transfer Characteristics in a Pin Finned Channel with Different Dimple Locations

Heat Transfer and Friction Factor Performance in A Pin Fin Wedge Duct with Different Dimple Arrangements

Flow And Heat Transfer In Microchannels With Dimples And Protrusions

Numerical Analysis of Heat Transfer Characteristics in a Pin Fin-Dimpled Channel with Different Pin Fins and Dimple Locations

An experimental and numerical study of flow and heat transfer in channels with pin fin-dimple and pin fin arrays

Flow structure and heat transfer characteristics of a dimpled wedge channel with a bleed hole in dimple at different orientations and locations

Convergence angle and dimple shape effects on the heat transfer characteristics in a rotating dimple-pin fin wedge duct

Comparisons Of Flow Friction And Heat Transfer Performance In Rectangular Channels With Pin Fin-Dimple, Pin Fin And Dimple Arrays

Flow Structure and Heat Transfer Characteristics of a Pin-Finned Channel with Upright/curved/inclined Pin Fins under Stationary and Rotating Conditions

Transitional Flow and Heat Transfer Characteristics in a Rectangular Duct with Stagger-arrayed Short Pin Fins

Numerical Analysis of Flow Structure and Heat Transfer Characteristics in Dimpled Channels with Secondary Protrusions

Experimental and Numerical Study of Heat Transfer and Flow Friction in Channels with Dimples of Different Shapes

Heat Transfer and Friction Factor in A Dimple-Pin Fin Wedge Duct with Various Dimple Depth and Converging Angle

Heat Transfer and Flow Friction Performance of Rotating Rectangular Channels with Different Dimple/Protrusion Structures