Abstract:In this paper, the second form of quadrilateral area coordinate method (QACM-II) was employed to develop a novel 4-node quadrilateral membrane element insensitive to mesh distortion. First, two stress functions in terms of the QACM-II ( S , T ) are given to represent exact solutions of pure bending state in x and y directions. Their linear combination can reflect exact solutions for pure bending in all directions because the QACM-II is a local natural coordinate system. Thus, the basic analytical solutions of stresses, strains and displacements corresponding to the pure bending state for the isotropic and anisotropic plane problems can be obtained. Then, the unsymmetric element technique was adopted to formulate an unsymmetric 4-node, 8-DOF (2DOFs per node) quadrilateral membrane element. This approach is derived from the virtual work principle, and uses different test and trial functions. The test function employs the isoparametric coordinate interpolation to satisfy inter-element compatibility, while the trial function adopts a novel composite coordinate interpolation of the Cartesian coordinates and QACM-II to satisfy the completeness requirements in physical space. Due to the linear relationship between quadrilateral area and Cartesian coordinates, the order of trial displacement fields will not degrade when the meshes are distorted. Since the test displacement fields satisfy the compatibility requirements and the trial displacement fields contain analytical solutions of pure bending in all directions, the new element can produce exact solutions in both constant stress/strain patch test and pure bending problem in any directions, which means the well-known contradiction declared by MacNeal’s theorem: any 4-node, 8-DOF plane membrane element will either lock in in-plane bending or fail to pass a C 0 patch test when the element’s shape is an isosceles trapezoid, has been perfectly broken through. The authors would like to acknowledge the financial supports of the National Natural Science Foundation of China (Project No. 11272181), the Specialized Research Fund for the Doctoral Program of Higher Educationof China (Project No. 20120002110080), and Tsinghua University Initiative Scientific Research Program (Project No. 2014z09099).

High-Performance Unsymmetric 3-Node Triangular Membrane Element With Drilling Dofs Can Correctly Undertake In-Plane Moments

Four-node Membrane Element of Vector Form Intrinsic Finite Element for Large Deformation Analysis of Membrane Structures

A Simple Unsymmetric 4‐node 12‐DOF Membrane Element for the Modified Couple Stress Theory

A New Five-Node Locking-Free Quadrilateral Element Based On Smoothed Fem For Near-Incompressible Linear Elasticity

A practical quadrilateral membrane element with drilling degrees of freedom

TRIANGULAR THIN-PLATE ELEMENT BASED ON VECTOR FORM INTRINSIC FINITE ELEMENT

An Unsymmetric 4-Node, 8-Dof Plane Membrane Element Perfectly Breaking Through Macneal'S Theorem

Four-Node Generalized Conforming Membrane Elements with Drilling Dofs Using Quadrilateral Area Coordinate Methods

A 3-NODE CO-ROTATIONAL TRIANGULAR ELASTO-PLASTIC SHELL ELEMENT USING VECTORIAL ROTATIONAL VARIABLES

A 4-NODE PLANE STRESS-FUNCTION ELEMENT WITH DRILLING DEGREES OF FREEDOM WHICH CAN PRODUCE HIGHLY ACCURATE STRESS SOLUTIONS AND IS INSENSITIVE TO CONVEX AND CONCAVE MESH DISTORTION

Development of triangular flat-shell element using a new thin-thick plate bending element based on semiLoof constrains

8-Node Unsymmetric Distortion-Immune Element Based on Airy Stress Solutions for Plane Orthotropic Problems

Rectangular Membrane Element with Rotational Degree of Freedom

Generalized conforming triangular membrane element with vertex rigid rotational freedoms

A 3-Node Co-Rotational Triangular Finite Element for Non-Smooth, Folded and Multi-Shell Laminated Composite Structures

An Efficient 3-Node Triangular Plate Element for Static and Dynamic Analyses of Microplates Based on Modified Couple Stress Theory with Micro-Inertia

Quadrilateral Membrane Elements with Analytical Element Stiffness Matrices Formulated by the New Quadrilateral Area Coordinate Method (QACM‐II)

A NEW 6-NODE CO-ROTATIONAL TRIANGULAR COMPOSITE SHELL ELEMENT

THE GENERALIZED CONFORMING TRIANGULAR MEMBRANE ELEMENTS WITH ROTATIONAL DEGREE OF FREEDOM

A Co-Rotational Triangular Finite Element for Large Deformation Analysis of Smooth, Folded and Multi-Shells

Application of the quadrilateral area coordinates: A 4-node quadrilateral membrane element beyond MacNeal’s theorem